Woodworking Equipment For Sale

Newman EPR 18 Planer Top & Bottom Planer Manufacturer specs (to be confirmed): Newman Model ERP-18 Double-Roughing Planer 40 HP Top Head 25 HP Bottom Head 18" Wide x 6" Thick Capacity Equipped with Top & Bottom Newman Cutterheads Two 10 HP Feed Motors Variable Speed Feed from 40 - 150 FPM Air-Filled Feed Tires Free-Standing Electrical Cabinet & Operator Control

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6r NEWMAN S-248 24" x 8" Single-Sided Planer Specifications: Planing thickness 1/16” - 8”. Min. stock length 13”, 4” Butted. Infeed & Outfeed table sizes 24" W x 16-3/4” L. Feed speeds 20 - 100 FPM. Equipped with: 4” Dia. 4-straight knife cutterhead. Segmented serrated upper with 2” W Spring-loaded segments & (3) Solid steel lower feed rollers. Chip breaker, with 2” W Reversible spring-loaded segments.

Newman S-382-HD Planer S/N 14069 - 7379 Hrs - 40HP Top Arbor & 75HP Bottom Arbor Includes Hydraulic Power Unit.

Newman HP-688 Twin Bay Hydraulic Cold Press6-Sections (top platens) each 24" x 30" each, Center posts between third and fourth platens, creating two overall areas of 30" x 74". Specifications: -- Max. fixed opening 48" with 11" cylinder stroke, each platen section has (1) 10" bore with 5" dia. ram cylinder; -- Each platen is 15/16″ thick and it’s back structure is webbed every 5-1/2″ X 7-1/2″. -- Side-mounted self-contained hydraulic system w/tank, 10 HP continuous operating pressure compensating pump. -- Hand-Valves to Cycle Individual Platens with pressure gauges for each platen. -- Idle Pop-Up Bed Rollers in the bottom platen for easy loading and unloading.Over all the press is in excellent condition, is extremely heavily built, and is also a beautiful impressive press in person.

Newman M512 Planer Moulder 5 Head Tooling For D Log 16" X 8" Capacity Pendu Notcher Also Available

Specially designed haunching machine for beaded face frames, picture frames and decorative cabinetry. This machine uses a specially designed 2-piece carbide insert adjustable cutter. -- The work piece is placed on the table and against the fence and the cutter travels in a vertical motion to achieve the precision cut. -- Any size cut width is attainable by adjusting the width of the cutter and indexing from the fence stops. -- TECHNICAL SPECIFICATIONS -- Motors: 1 @ 1.1 KW (1.5 HP), Voltage: 220/440V/3/60hz, RPM: 6,000 RPM @ 60 hz, Air: 6 Bar, -- TOOLING: Insert Carbide: Milling head 140 mm (5.5"), Height min: no min., width 1/6" (4.2 mm). Max Profile: Height 3.5" (88.9 mm), width no max. -- Machine Dimensions: L x W x H - 40" x 30" x 35". Machine Weight: 675 lbs. -- AVAILABLE OPTIONS (Call for Pricing): Tooling carbide insert head, additional set of inserts, additional flip stops, foot pedal control, left & right digital fence.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i59 NEWTON B-100 2-Spindle Air-Operated Horizontal Boring Machine Specifications: Table size 10” x 16”. Distance between spindle centers 1-5/32" - 7-1/4”. Max. boring depth 5". Max. clamping thickness 3". Horizontal table travel 5", Vertical table adjustment 3-1/2". Max. bit dia. 3/4". Spindle speed 3,600 RPM. Equipped with: 1 HP - 1,725 RPM Motor. (2) Pneumatic hold-downs. Foot pedal control.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5a NEWTON B-100 2-Spindle Air-Operated Horizontal Boring Machine Specifications: Table size 10” x 16”. Distance between spindle centers 1-5/32" - 7-1/4”. Max. boring depth 5". Max. clamping thickness 3". Horizontal table travel 5", Vertical table adjustment 3-1/2". Max. bit dia. 3/4". Spindle speed 3,600 RPM. Equipped with: 1-1/2 HP - 3,450 RPM Motor. (2) Pneumatic hold-downs. Foot pedal control.

Manufacturers Specifications Max Width of Material: 12 in 12-14” blade capacity Production Rate: 45-50 cuts per minute designed for 45 degree vertical cuts Work Tables: 60 inches to the right and left of the saw, Motors: (2) 2.5 HP (3,600 RPM). 220/60/3PH.

---Liquidation Item---Palletized & Ready to Ship with Free Loading! 5,000 CFM 15 HP Enclosureless Baghouse Dust Collector https://exfactoryauctions.com/Detail/DC-230843/event/L051624$1

NORTHFIELD - #4, ...Table SawSpecifications: -- 16" Dia. saw blade cap.; 7.5 HP - 3,450 RPM motor; 1" dia. arbor; 13/16" dado cap. with: Thin collar; blade tilts: 0° - 45°; 32" rip cap. with T-type fence.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6q NORTHFIELD 12HD 12" Heavy-Duty Jointer Specifications: Max. depth of cut 5/8", Rabbeting cap. 5/8" x 12". 17” x 51-1/2” x 32-1/2” H. Outfeed table size 17” x 43” x 32-1/2” H. Equipped with: 3-1/2” Dia. 3-Knife Cutterhead. 5 HP - 1,735 RPM Motor. 52” L x 5-1/2” H Cast-iron fence, with 0° - 45° Tilt. Swing-away guard.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i66 NORTHFIELD (AMERICAN WOODWORKING COMPANY) UNIPOINT X-36AF 16" Heavy-Duty Radial Arm Saw Specifications: Base size 29” x 46” x 35” H. Table size 27” x 57” x 36-1/2" H. Max. depth of cut 4-1/2". Max. dado cap. 1-9/16". Max. cross cut cap.: 25" with fence in rear position, 17-1/2" with fence in normal position. Max. rip cap.: 31" with fence in rear position, 23-1/2" with fence in normal position. Angle cap.: 45° Left tilt, 70° Right pivot, 45° Left pivot. Arbor dia. 1". Equipped with: 5 HP - 3,450 RPM Motor. Ram & track travel system, with Rear stop bar with (6) 7/8" Stops, Equipped for left & right compound angles. Automatic blade return device.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i67 NORTHFIELD (MONARCH) UNIPOINT 16" Heavy-Duty Radial Arm Saw Specifications: Base size 25” x 45” x 33” H. Table size 25” x 48” x 35" H. Max. depth of cut 4-1/2". Max. dado cap. 1-9/16". Max. cross cut cap.: 25" with fence in rear position, 17-1/2" with fence in normal position. Max. rip cap.: 31" with fence in rear position, 23-1/2" with fence in normal position. Angle cap.: 45° Left tilt, 70° Right pivot, 45° Left pivot. Arbor dia. 1". Equipped with: Ram & track travel system, with Rear stop bar with (6) 7/8" Stops, Equipped for left & right compound angles. Automatic blade return device.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5z NORTHTECH NT-EV-920RC DUAL HEAD WIDE BELT SANDER 2-Head wide belt sanding machine with 37" capacity. - Heads: 1st head: 8-1/4" Dia. grooved rubber contact roll, with 20 HP motor. 2nd head: Combination finishing platen with grooved rubber roller and polishing pad, with 15 HP motor. Two (2) infeed and outfeed spring loaded hold-down rollers; 2 HP variable speed feed drive. Sanding belt size: 37" X 85" and with electronic belt tracking. Motorized opening between the conveyor and sanding bed. Ammeters for measuring motor loads.

Northtech NT SLR-16SC Precision 16″ Straight Line Rip Saw FEED SYSTEM --Saw motor: 15HP, 3PH 230/460V -- Feed: 1.5HP variable from 40′ – 120′ FPMPRODUCT DIMENSIONS -- Min. thickness: 3/16″ -- Max depth of cut: 4-1/16″ with 16"; Blade -- Max depth of cut: 3-1/16"; with 14"; BladeSpecifications: -- Direct Drive = Direct Drive -- Feed Hp. = 1.5 Hp. -- Feed System = 4"; Split Chain with True Trac -- Feed Speed = 40-120 FPM -- Assisted Start = Wye Delt"; -- Throat Capacity = 18-1/4"; -- Min. Length = 12"; 2nd Roller to Kickback -- Min. Thickness = 3/16″ -- Max. Thickness = 4-1/16"; W/ 16"; BladeGlue Line Rip = Guaranteed 12′ 4/4 stock @ 50 FPMEquipped with & Features -- Blade Size = 14"; Tungsten Carbide Tipped -- Dust Collection = 1417 Total CFM -- Dust Port Out = 4"; Top 6"; Bottom -- Arbor Diameter = 2″ Arbor -- Idle Rollers = (8) Idle Rollers -- Hold Down Style = 8 Spring Loaded Hold Downs -- Kickback Finger = (59) Lower (32) Top -- Automatic Mechanical Oiler -- Low Oil Warning = Low Oil Shut-off -- Laser = 100mw Laser Light & Mount Bracket

Northtech NTM-660M-20HCVS Planer 24" capacity

NORTHTECH - NT-SL2000XL, ...Straight Line Rip SawSpecifications: -- 20 HP Direct Drive Straight Line Rip Saw. -- 2" Arbor. -- Distance from column to blade: 18 in. -- Saw blade size: 10" - 14". -- 3-1/8" Cutting capacity. -- Glue Line Saw. -- Feed Motor: 1.5 HP. -- Feed Speed: 20 - 105 FPM.

Northteck MRS-14-DXL 460v Manufacturer notes: This is a very popular machine and cost effective. New open ended design allows for you to cut wide material up to 27-1/8? wide. Plus spare arbors, lasers, and the optional quick locking, easy to adjust infeed will not break the bank. The Northtech heavy-duty 50 HP multi-rip (“gang-rip”) saw with 15? maximum blade diameter quickly and accurately cuts material up to 4-15/16? thick and 27-1/8” wide. Cutting both sides of your blanks at once provides incredible parallelism, reducing required moulder allowance, and increasing your yield. Laser guides (one included) and an optional 103” fence make proper alignment of even the longest material simple and precise. Variable feed speeds of 25 – 120 FPM and powered height adjustment further improve operator efficiency.

Northtech Machine NT-GRS-300RF Gang Rip Saw REDUCED Roller feed Max depth of cut is 4". Max width is 12". New Saw Blades And Spacers