Woodworking Equipment For Sale

OMGA RADIAL 600 P3S Radial Arm Saw - 24" Crosscut Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180° Swivel of entire saw carriage for mitered crosscuts. -- 45° Saw head tilt for compound miter cuts. -- Spring loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden tabletop with full length back fence. -- Fabricated open steel base. -- Electromagnetic brake to stop the blade within (2) Seconds. -- Magnetic controls, push button controls & thermal overload switch. -- Options: Single-phase motor, Blade, Dado head guard, Dust collection system, and Roller tables for infeed & outfeed.

OMGA RN 450 Radial Arm SawSpecifications: -- 3 HP Saw motor; 12" blade; 17-3/4" crosscut cap.; 26-3/4" rip cap.; 3-1/2" @ 90° thickness cap., 2-1/2" at 45°; 1-1/2" dado cap.; solid saw carriage with replaceable tempered steel sliding tracks. Equipped with: -- Carriage that travels on (8) bearings with dust scrapers for smooth travel & extended track life.180° Swivel of entire saw carriage for making mitered crosscuts; 45° saw head tilt for compound miter cuts; spring-loaded return for safe return of saw head after completion of the cut. Complete with: -- Oversized replaceable wooden table top with full-length back fence; fabricated open steel base; electro-magnetic brake to stop the blade within (2) seconds. Includes: -- Magnetic controls, push button controls & thermal overload switch. -- Single-phase 2 HP motor available.

OMGA 900/7 FM RADIAL ARM SAW Specifications: -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90°; 24-15/16" @ 45°; 5-7/8" max. thickness cap. at 90°, 4-3/16" at 45°; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed.Features: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages that travel on (8) bearings with dust scrapers for smooth travel & extended track life; -- 180° Swivel of entire saw carriage for mitered crosscuts; 45° saw head tilt for compound miter cuts.Complete with: -- Spring loaded return for safe return of saw head after completion of the cut; -- Oversized replaceable wooden tabletop with full length back fence; fabricated open steel base; -- Electro-magnetic brake to stop the blade within (2) seconds.Includes: -- Magnetic controls, push button controls & thermal overload switch.

OMGA RN 450 Radial Arm SawSpecifications: 3 HP Saw motor; 12" blade; 17-3/4" crosscut cap.; 26-3/4" rip cap.; 3-1/2" @ 90° thickness cap., 2-1/2" at 45°; 1-1/2" dado cap.; solid saw carriage with replaceable tempered steel sliding tracks. -- Equipped with: -- Carriage that travels on (8) bearings with dust scrapers for smooth travel & extended track life.180° Swivel of entire saw carriage for making mitered crosscuts; 45° saw head tilt for compound miter cuts; spring-loaded return for safe return of saw head after completion of the cut. -- Complete with: -- Oversized replaceable wooden table top with full length back fence; fabricated open steel base; electro-magnetic brake to stop the blade within (2) seconds. -- Includes: -- Magnetic controls, push button controls & thermal overload switch.

3 Moulding heads 1 grooving head workpiece length 2300 mm workpiece thickness 35 mm Hopper feed Numeric controller

OMGA 2005 OPT 4000 Saw w/ Infeed and Outfeed Model J2005

OMGA Radial Arm Saw

Omnitech Selexx Pal CNC Router

OMPEC TRO/10/R50 TYPE CE 3200 10-1/2' Hydraulic Veneer Guillotine, with 10° Cut & 50 mm (1.97") Fence TeethSpecifications: -- Max. cutting length 3,250 mm (127.95"), Nominal cutting length 112". -- Cutting width 23 - 1,020 mm (0.91" - 40.16"). -- Max. cutting height 80 mm (3.15"). -- Table height 950 mm (37.40").Equipped with: -- 7.5 kW (10 HP) Hydraulic motor. -- Motorized parallel back fence, with 1/2 HP Motor, Digital readout, Hand wheel for fine adjustment, and Ball screw guides. -- Two-Handed operation & Safety light curtain.Complete with: -- Manual. -- Replaceable cutting pads.Machine Dimensions without Back Fence/Table or Hydraulic Unit: 192" x 20" x 76" H.NOTE: Very well maintained, though machine has been stored outside under tarp since Mid-2023, thus some surface rust can be expected.

--Make an Offer!--Liquidation Surplus Machine-- OMPEC TRO/10/R50 TYPE CE 3200 10-1/2' Hydraulic Veneer Guillotine, with 10° Cut & 50 mm (1.97") Fence Teeth Specifications: Max. cutting length 3,250 mm (127.95"), Nominal cutting length 112". Cutting width 23 - 1,020 mm (0.91" - 40.16"). Max. cutting height 80 mm (3.15"). Table height 950 mm (37.40"). Equipped with: 7.5 kW (10 HP) Hydraulic motor. Motorized parallel back fence, with 1/2 HP Motor, Digital readout, & Hand wheel for fine adjustment, and Parallel rack & pinion guides. 2-Handed operation & Safety light curtain. Complete with: Manual. Replaceable cutting pads. NOTE: Very well maintained, though machine has been stored outside under tarp, thus some surface rust can be expected.

Onsrud Inverted Router

The machine has been cleaned, checked and repaired 5HP 230V 3Ph

Optisand L202 Moulding Sander

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i55 ORBIT OR-1758F 17" 12-Speed Floor-Type Drill Press Specifications: Actual throat 8-1/4". Table dia. 11-1/2". Base size 8" x 8". Quill travel 4-1/2". Chuck capacity 5/8". Spindle speeds 250, 380, 450, 550, 650, 800, 1,110, 1,280 1,420, 1,800, 2,000, & 3,100 RPM. Equipped with: MT2 Spindle taper. 1-1/2 HP - 1,725 RPM Motor.

ORIGINAL 3691-03 Overhead Rail Panel SawSpecifications: -- Sturdy welded steel frame for saw head and beam arm; 7.5 HP motor; 1" dia. arbor; 1-3/8" long arbor; saw head with automatic electro-mechanical motor brake. -- 20" Max. blade dia.; 7" max. cutting depth @ 90°; 3-1/2" @ 45°; 62" long x 1", 4" & 6" thick max. crosscut cap. -- Complete with: -- 36" x 60" MDF table; heavy gauge steel base & legs for solid support. -- Includes: -- Upper & lower blade guards; magnetic starter and overload protection. -- Single-phase option available for;...$ 250.

ORIGINAL 3691-01-7 Overhead Rail Panel SawSpecifications: -- Sturdy welded steel frame for saw head and beam arm; 7.5 HP motor; 1" dia. arbor; 1-3/8" long arbor; saw head with automatic electro-mechanical motor brake. -- 20-1/2" Max. blade dia.; 8" max. cutting depth @ 90°; 4" @ 45°; 60" long x 1" max. crosscut cap. -- Complete with: -- 36" x 60" MDF table; heavy gauge steel base & legs for solid support. -- Includes: -- Upper & lower blade guards; magnetic starter and overload protection.

Original Radial Arm Saw

The Original Radial Arm Saw 230/460 Volt 3Phase

ORIGINAL - 3551, ...Radial Arm SawThe "Original" Radial Arm with: Full 24" crosscut capability. -- Sturdy cast iron frame for saw head and arm.Equipped with: -- 5 HP Single-phase motor with: Magnetic starter and overload protection. -- Saw head with: Automatic motor brake and automatic return. -- Positive locking device for tilting. -- Large 49" x 50" MDF table. -- 16" Blade cap. with: 4-3/8" Material thickness at 90°. -- Features: -- Heavy gauge steel base & legs for solid support. -- Complete upper & lower blade guards and anti-kickback attachment.

ORIGINAL 3579-22L Metal Cutting Radial Arm Saw (SD Series)SD Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. Aluminum, Brass, Bronze, Copper, Fiberglass, Lead Sheets, Plastic, Steel. Specifications: -- 7.5 HP TEFC Saw motor; 22.5" dia. blade; 1" x 3-1/8" saw arbor; 8" thickness cap.; 4" @ 45° bevel; 24" crosscut cap. with 3/4" stock; 21-5/8" max. miter @ 45°. -- Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; saw head features VFD technology; which increases the start-up speed of the blade by over 8 seconds with a slower, smoother start-up that slows and stops the saw over approximately 25 seconds to allow for consistent braking times; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: -- The Metal Cutting Series comes with the standard t-slot aluminum extruded top, allowing easy to attach aluminum fence, clamping systems, table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to an extruded leveling frame for easy leveling of the entire table assembly throughout the life of the machine. -- Available Options: -- Power feed saw head; pneumatic clamping systems; Mist Coolant System (manual for non-ferrous cutting); blade.