Woodworking Equipment For Sale

SELCO EBT 120 REAR LOAD, AUTOMATIC PANEL SAW: -- Specifications:175" (4,450 mm) Overall cutting length & 4.8" (122 mm) max. saw blade projection. 20 HP (15 kW) Main saw motor, 3.0 HP (2.2 kW) scoring motor. "DIGISET" electronic scoring blade adjustment from the PC. -- Saw Carriage:Variable saw carriage forward travel speed 0 - 426 FPM (0 - 130 MPM), return speed 426 FPM (130 MPM). -- Pusher Fence:Electronically controlled overhead program fence, rack & pinion drive, variable forward speed 0 - 262 FPM (0 - 80 MPM), return speed 262 FPM (80 MPM); both the saw carriage and pusher driven by AC brushless Servo motors. --(8) Gripper Clamps (open up to 127 mm), of which (4) are closely spaced in crosscut area and the other (4) are at equal distance in rip cut area. -- Operator Interface:PC front end with Selco "NC 500" + Windows "XP" operating system; 15" flat screen control panel, standard keyboard, on-board optimization (displays cutting dimensions & patterns), possible tele-service diagnostic via telephone line, data input by keyboard or possible direct downloading from office PC. -- Rear Load System:Automatic rear loading lift table; 177" (4,500 mm) x 87" (2,200 mm) max panel size; 28.75" (730 mm) max. Stack height (max. stack height with pit or risers 812 mm / 32"); 10,000 Lbs (4,500 kG) cap. with 4 HP (3 kW) motor for raise-and-lower, encoder controlled guide rods for automatic book height adjustment. -- Rear of Machine:(3) Lateral aligners to accurately position book of panels on rear saw table prior to cutting; modular roller rear machine table with (12) roller track modules, side aligning device cross aligners to accurately position book of panels against the right angle fence prior to crosscutting. -- Complete with:90" (2,300 mm) Long crosscut fence (front-to-back), (2) side/crosscut aligners, "Quick Change" saw blade replacement system. --(4) Front mounted air flotation table with rounded front 24" x 80" (650 x 2,050 mm); rear of machine enclosed for safety. -- NOTE: Forward pusher speed for this machine is currently set at 82 FPM (25 MPM), return speed currently set at 197 FPM (60 MPM) according the CE safety standards. -- Actual Model is SELCO EBT 120 L ACTIVE 4500/2200.

SELCO WNT 7/730 REAR LOAD, AUTOMATIC PANEL SAW -- Specifications: 177" (4,500 mm) Overall cutting length, 5" (127 mm) max. saw blade projection, 29 HP (22 KW) main & 3.5 HP (2.6 KW) scoring motor. -- Saw Carriage:Variable saw carriage speed from 0 - 606 FPM (0 - 185 MPM), return speed 600 FPM (185 MPM); Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (8) pneumatic gripper clamps (open up to 5" / 128 mm).Forward speed of 295 FPM (90 MPM) & return speed of 295 FPM (90 MPM); rack & pinion drive, driven by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Selco "OSI" + WINDOWS "7" operating system with easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by industrial keyboard & mouse, floppy disk or CD; direct downloading from office PC is possible.OSI (Open Selco Interface) guarantees fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself and, when necessary, to the width of trim cut too. -- Rear Load Lift Table:Automatic lift table 173" x 87" (4,400 x 2,200 mm), 12,000 Lbs (5,455 KG) lift capacity.4 HP (2.3 kW) Motor for raise-and-lower, encoder-controlled guide rods for automatic book height adjustment; 28.7" (730 mm) max book height w/o a pit or risers. -- Rear of machine:(3) Lateral aligners to accurately position book of panels on rear table prior to cutting.Rear modular roller support rails with 80 mm dia rollers; rear of machine enclosed for safety. -- Front of machine:Automatic side/crosscut aligning device located inside the pressure beam aligns the panels against the right angle fence prior to cross-cutting, 2.4" - 87" (60 - 2,200 mm) stroke.90" (2,300 mm) Long crosscut fence (front-to-back); (4) Front mounted air flotation tables with rounded fronts 26" x 81" (650 x 2,050 mm). -- Complete with: "Quick Change" saw blade system; "DIGISET" electronic scoring adjustment; Selco "Quick-Opti" optimizing software; CP link. -- Options Include:173" x 87" (4,400 x 2,200 mm), LH facing, rear in-feed/out-feed conveyors with fork cut-outs that allow for staging/loading/unloading from the Rear LH side of the machine. -- Actual Model is SELCO WNT 7/730/4500.

SELCO - EB 70 L, ...CNC Front-Load Horizontal Beam CNC Panel SawSpecifications & Features -- 126" (3,200 mm) Overall cutting length, 2-3/4" cutting height (80 mm saw blade projection); 10 HP main & 3 HP scoring motor. -- Modular roller rear machine table; side aligning device for squaring ripped strips out to 59". -- Variable saw carriage travel speed from: 0 - 164 FPM (0 - 50 MPM). -- Electronically controlled overhead program fence; rack & pinion driven; forward speed of 80 FPM, 131 FPM return speed.Equipped with: -- (6) Clamps (open up to 70 mm - 2-3/4"); (3) are closely spaced in crosscut area & (3) are at equal distance in rip cut area; AC Servo motor drives on both saw carriage & pusher fence. -- PC Controller with: Graphics color monitor & "Assist Line"; LED readout integrated into "high tech" look operator control panel (displays cutting dimensions & patterns), (400) cutting patterns with (50) different dimensions for ea. pattern, self-diagnostic. Machine Features -- 1,500 mm (59") Long crosscut fence (front-to-back); (1) side/crosscut aligner. -- (1) Front mounted air flotation table in the crosscut area (24" x 80"), and (2) front mounted air flotation tables with patented rounded front for moving panel from rip to crosscut position (24" x 59" each). -- 36" Working height; rear of machine partially enclosed for safety.

Selco EB80 Panel Saw This machine has already been dismantled and removed from service. It is ready to load. - 2004 Selco EB 80 - Three air flow tables - 144? cut line - Rear programmable pushing fence - 7 grippers - Auto saw height up to 80mm - 18 hp main motor - Programmable saw carriage speed for cutting and return stroke - PC controller with software

Giben WNAR6 Series Twin Pusher Angular Panel Saw Cutting length rip cut 3200 mm Cutting width cross cut 2200 mm Projection height 95 mm Lateral loading lift table with direct motorized infeed and right motorized infeed 2200 mm width interior panel turning station in the rip cut section Book aligners for both long and short rip stacks 17 material clamps Split pusher in the cross cut area

Selco WNT610 Rear Load Panel Saw Biesse Winstore Material Handling System This system is already dismantled by a technician and ready to be shipped. Installation can also be provided.

Ball Milling machine.

SHENG-SHING - SDM-15 ...Wide Belt Sander (Open Ended)15" Single Head Wide Belt Sander with open end for up to 30 " capacity. -- Sanding Head: 15" Wide (30" cap. with 2-pass); 8" Helically Grooved Rubber Covered Contact Roll with 7.5 HP Drive. -- Features: 0" - 6" Part thickness cap., 2-speed conveyor feed 12 or 16 FPM; 16" x 48" Abrasive belts with air tensioning, pneumatic abrasive belt tracking.

SHENG-SHING - SDM-25, ...25" Wide Belt Sander1-Head; 24" width cap.; rubber-covered contact roll; approx. 10 HP motor. -- Abrasive belt size 25" x 48" with: Air tensioning & electronic abrasive belt tracking. -- 5-1/2" Max. height opening with: Manual raise & lower; variable feed speed drive. -- Complete with: Magnetic controls & dust outlet.

--This machine is in an Auction on exfactoryauctions.com-- SHODA MAXXIM 5' x 10' 2-Head CNC Router, with Vacuum Pump – Seller states that machine was run (1) shift from 2002 - 2006, then only a few days per year since! Specifications: Table size 63” x 122” x 29” H, with 3/4” Thick Top. Travels: X-Axis 133", Y-Axis 73", & Z-Axis 10". Max. machining feed speed 590 IPM. Max. positioning speed for X & Y-Axes 1,180 IPM. Equipped with: Moving single-zone vacuum table, with Extra-hard phenolic surface, Front-to-back configuration. (2) 12 kW (16 HP) - 18,000 RPM BT-30 Air-cooled electro-spindle, with Variable spindle speeds 3,000 - 18,000 RPM, AC Inverter, Dynamic spindle braking, Air/Oil mist lubrication. 16-Position Carousel-type automatic tool changer. Features: All Axes with Extra-large precision contour linear guideways. Closed loop AC Servo drives & Precision ground ball screws. Extended extra heavy-duty bridge for full 5' x 10 table coverage. Centralized lubrication system for all spindle & roller bearings, ball screws & guides. Operator Control: FANUC "SERIES 21i-M" Mobile CNC Control, with 10.4" Display, RS-232 Port, PCMCIA Slot, (3) Axes Simultaneous control, Manual pulse generator, Inch & Metric operation, Feed rate & Spindle speed override, Helical interpolation, Full cutter compensation, Background editing features, EIO/ISO recognition. Foot pedal control. Complete with: 2001 TRAVAINI "1-501V1A-460" 40 HP Vacuum Pump, S/N S1433, with Hour meter reading 17,003 Hrs. (10) Toolholders. Dust Manifold. Dimensions without Safety Rails: 202" x 155" x 110" H. Dimensions of Vacuum Pump: 82" x 36" x 65" H.

Shopbot CNC Router

SHOP FOX W1738 WIDE BELT SANDER 37-1/2" Width cap. Combination HeadSpecifications --Single Head, 37" Wide Belt Sander with a combination head. -- 4" Dia. rubberized contact drum and finish platen for a fine finish to your work. -- Efficient 10 HP Sanding belt motor. -- Popular size 25" x 60" Abrasive belts. -- Reliable Air tracking for the sanding belt.Equipped with & Features -- Electronic digital readout for manual setting of conveyor bed. -- Better designed with (4) Jackscrews to move the conveyor bed from a 0" - 5-7/8" opening. -- Variable Conveyor speeds of 13 to 65 FPM. -- (2) Each infeed & outfeed spring loaded holddown rollers.

Shop Fox W 1739 Mini Planer/Moulder

SHOP FOX W1678 Heavy Duty 26" 2-Head Drum SanderSpecifications: -- Heavy Duty 26" 2-Head Drum Sander. -- 24" Wide thick conveyor belt, similar to the ones used with Wide Belt Sanders. -- (2) drums 6" x 27-3/4". -- Enclosed fabricated steel base with easy access doors. -- 5 HP Single-phase motor that drives both sanding drums. -- 1st Head for coarse; 2nd head for fine sanding. -- Independent adjustment on both heads. -- Variable Speed conveyor , 0.25 HP feed drive. -- 0" - 4-1/4" Thickness cap. with manual hand wheel adjustment. -- (2) Each rubber covered infeed & outfeed rollers. -- (2) Dust outlets and push button magnetic controls.

Only 40 Hrs. Run Time! Shop Fox W1812 Planer Moulder Specifications: 12" Open-sided Mini Planer/Moulder offers smooth moulding and planing. 2 HP Motor belt drives head for 7,000 RPM spindle speed. Very smooth operation with a variable feed rate of 0-18 FPM. Cutterhead Diameter 1-1/4"² Max. material width 6.75"; also planes 7.5" wide. Easily handles material thickness from 1/4" to 7-1/2" max. 9" Min. stock length; max. profile depth 3/4" and max. profile width 6-3/4". Comfortable table working height of 31". Includes: Sturdy work "stand" Front-mounted On/Off controls. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

1999 Shun Kuang KP6-220S 6 Head Moulder S/N 990536

2002 Shun Kuang Machine KP6=230S 6 Head Moulder S/N 020705

SICOTTE - J-30-4, ...Vertical Boring Machine24" x 48" Fixed table and moving head.Specifications: -- (3) 1-1/2" Spindle with spring collet, 1/2" capacity. -- (3) 2 HP - 1,750 RPM - TEFC Motors, each motor with timing belt drives. -- (2) Spring loaded holddowns. -- Table is fixed while the heads with spindles move hydraulically up & down with an adjustable speed feed (this arrangement can be equipped with an automatic feeding device).Features: -- 0" - 8" Adjustable head stroke. -- Foot pedal activated. -- Vertical stroke and feed speed of the heads with spindles are both adjustable. -- 3 HP Hydraulic variable feed motor, vertical spindle movement; movement can be set to either manual, single stoke, or continuous stroke.

SICOTTE - Airbor 700-6, ...Vertical Boring Machine18" x 72" Table; variable air/oil feed table; up to 6" adjustable stroke.Equipped with: -- (3) Vertical 2" dia. spindles with Jacobs® Chuck, 0 - 1/2" cap.; spindles fully adjustable to entire table surface and can be as close as 2" center-to-center; spindle speed of 3,600 RPM. -- (3) 2 HP - 1,800 RPM motors, each motor timing belt drive mounted on a cast iron base with eccentric locking mechanism and a cast iron arm that has 18" of adjustment.Complete with: -- (2) Air loaded holddowns. -- (1) Foot switch for boring cycle. -- Includes Safety shield.

SICOTTE - J 3H-7, ...Vertical Boring Machine24" x 84" Table size. Equipped with: -- (5) 1.5 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (5) 1-1/2" Dia. spindles with spring collet 1/2" capacity. -- (2) Spring loaded holddowns.Features: -- 0" - 8" Vertical table feed, hydraulically operated; variable feed and table travel adjustable from front of machine. -- 3 HP Hydraulic pump motor with reservoir. Complete with: -- Electrical Control System with separate motor controls. -- Single or continuous stroke. -- Manual and automatic cycle. -- Foot pedal actuation. -- (1) Safety guard.