Woodworking Equipment For Sale

14' Spiral Rollcase Infeed With Variable Speed Drive.

Holds 2 std 48x40 pallets in each rack 1400 Ft long 20 Ft High May be able to be split up into smaller sections

Reconditioned flex tip rotary valve

Table Saw

Planer Feed Table

US Concepts "FAS-106" Horizontal Arch Moulding Shaper -- 31" x 49" Table size, 10 HP main motor, 1-1/4" spindles, 6,500 RPM spindle speed forward and reverse, 6" max. cutting height, 6-1/2" max. cutter dia., 0.75 HP variable speed DC feed motor, (5) horizontal feed rolls; cast iron table, digital axial & cutting height adjustment, long electrical cord -- Floating feeders work well in both directions, motor runs at clockwise and counterclockwise rotation, 49" wide x 40-1/2" deep with handles, 36-1/8" high to the tabletop. 55-5/8" overall height -- Includes original paperwork, manual, brochureNOTE: Does not include cutter-heads, Spindle squeaks at start-up, Selling as is.

US CONCEPTS FAS 100 Arch ShaperHorizontal Arch Shaper for curved mouldings. This heavy-duty machine consistently cuts curved profiles by using a special floating feed system that registers on the outside edge of the curved blank. Specifications: -- 31" X 49" Table size, 7.5 HP main motor, 1-1/4" spindles, 6,500 RPM-Shaping, 1,600 RPM-Sanding.5" Max. cutting width, 6-1/2" max. cutter dia., 0.75 HP variable speed DC feed motor, (5) horizontal feed rolls; cast iron table. -- The FAS uses digital counters to adjust axial & cutting height adjustments accurately. This combination allows you to cut any shape moulding such as radius or ellipse and even a closed profile such as a full circle or oval. -- For added flexibility, the lower cutterhead speed offers the opportunity to sand these profiles after cutting.

US CONCEPTS CHB-16 HauncherThe CHB-16 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 16". (Also available in 20" capacity) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 42" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

US - CONCEPTS - FAS 100, ... Arch Moulding ShaperSpecifications: -- Table size: 28" x 46" x 34" H . -- Spindle dia.: 1-1/4". -- Spindle speed: 6,500 RPM. -- Max. cutting width: 4"; max. cutter dia.: 6-1/2".Equipped with & Features: -- 7.5 HP Spindle motor, 0.5 HP variable speed DC feed motor. -- Mobile base with (4) Swivel casters.Dimensions: 50" x 32" x 60" H.

US CONCEPTS CHB 12 HauncherThe CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 12". (Also available in 16" & 20" capacities) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 36" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze. -- The Floating feed system is user friendly and easy to set up. -- The Spindle can be adjusted from Horizontal to 52° to insure the proper cut on the parts you need!

US CONCEPTS FAS-HD "Arch Type" Shaper;Specifications: -- Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze.

75 HP 550 Volt 3 phase

Vac-U-Clamp FT900 Thermafoil mPress Brand new - Seller never used it!

Vac-U-Clamp FT800+ Thermofoil Press 52" x 105" Work area Dispenser Rack (3) Vac bags new in boxes still

ADVANCE MANUFACTURING VACUMIZER M-100 Vacuum CoaterModel M-100 Vacuumizer Continuous Feed Thru Vacuum Finisher, -- 71/2 Hp Vacuum Pump, Capacity : 2" X 6" openingNote: Transformer for 600 volts included

Vak-matic Vacuum Table as pictured

Convert your Edgebander from its standard Glue Pot system to PUR Slot Die Extrusion system usingVALCO MELTON'S HOT MELT/PUR EXTRUSION SYSTEM With up to 60 mm wide Glue Line Coverage The "IsoMelt Mini" melting tank is used for this proposal, it will be able to melt and pump around 10 Lbs of adhesive per hour. The IsoMelt Mini has a completely enclosed reservoir, which seals off the PUR from moisture in the atmosphere. To ensure that no moisture enters the reservoir, there is a small PLC program that injects dry air on a timed basis into the reservoir. The external MCP-6 pattern controller will process the photo-eye input and encoder signal measuring the machine speed. The pump will deliver adhesive to the head. A sensor mounted upstream from the applicator head will "see" the edge of the board coming through the system and triggers the valve to fire at the appropriate time and shut off at the appropriate time, ensuring that glue is accurately placed. An encoder is included for the speed feedback necessary for precise pattern placement. The head itself will need to be mounted in place of your current glue pot.Should you decide to go with this solution, we will provide you with drawings of the mount to make sure there are no issues with the fit before we take your machine down for the install.Also to expedite frequent changeover of part thickness and the importance of machine up-time, this proposal includes the motorized part thickness adjustment. It eliminates the need for operators to adjust the coating width on each setup.Components Required:1 946XX052 IsoMelt Mini, 4 cc/rev pump, 53 Lbs (24kG)/Hr, 2 exit NI1201 968XX167 Clearcut 60 edgebanding head (adjustable up to 60 mm wide)1 N/A Motorized option for edgebanding head including. . . 988xx894 controller, 912xx860 cable kit, 912xx027 unit communication cable1 988XM859 Uni-Flow Pneumatic Control for IsoMelt Mini1 913XX876 NV-10A level sensor board1 913XX513 Level sensor M30X1,51 780XX149 Heated hose, 2300/3000 Series,1/2-inch X 16-ft, 240 V1 074XX056 MCP-6 pattern control1 155XX341 1000 Pulse Encoder Kit (rigid encoder bracket)1 029XX511 Encoder splitter, Y-adapter to D series hot melt unit1 030XX632 Encoder cable, 8 m, 8-pin DIN1 280XX256 Fixed-field sensor, 4-inch (100-mm) range, with 581XX484 mounting bracket1 030XX596 Scanner cable, 10 m, flying leads 1 030XX882 Valve cable, 10 m, female reverse key to flying leads1 799XX716 Tank fittings kit, qty 2, straight #8 hose core1 799XX713 Tank fittings kit, qty 2, 45-degree #8 hose core 10 795XX550 InsulationPrice is for all of the items required to convert your Edgebander to an efficient PUR machine. Labor prices not included.

VALITON D550 Compressed Tenon Machine NOTE: Missing Cam. Equipped with: 1-1/2 HP - 1,740 RPM - 208-220/440 V Dual voltage motor.

VALTORTA FV-P Stain Roll Coater51" Width cap., single head roll coater 1.5 HP variable conveyor speed 80 - 100 FPM.