Woodworking Equipment For Sale

WHIRLWIND - 855, ...Dual Table Oscillating Edge SanderDouble-sided with: 8" x 56" Platens size.Specifications -- 7-1/2 HP - 1,725 RPM TEFC Motor; abrasive belt size: 8" x 151"; approx. (150) oscillations/Min with 3/8" stroke. -- 11" x 55" Side table; tilts 0° - 45° with 8" vertical adjustment; tiltable end table; iron frame machine base. Complete with: -- Magnetic electrical controls w/overload protection; dust hood on drive end; all standard equipment.

WHITNEY NO. 105 24" x 8" Single-Sided Planer, with Knife SharpenerSpecifications: -- Planing thickness 1/16"; - 8";. -- Min. stock length 13";, 3"; Butted. -- Infeed & Outfeed table sizes 23-3/4" W x 16-1/4"; L. -- Feed speeds 20 - 60 FPM. Equipped with: -- 4-1/2"; Dia. 4-straight knife cutterhead, with 7-1/2 HP - 3.500 RPM Motor. -- 5"; Dia. Segmented serrated infeed with 2"; W Spring-loaded segments & 3-9/16"; Dia. Smooth solid steel outfeed upper feed rollers, with 1-1/2 HP Motor & Micro-feed selector. -- Chip breaker, with 2-1/4"; W Sections. -- (2) 3-9/16"; Dia. Smooth steel in-table feed rollers.Complete with: -- Motorized Knife Sharpener, with 1/4 HP - 1,750 RPM Motor.

Williams 125 CJS1 Hammermill

Williams 125 HP Hammermill 230/460 3-phase

William & Hussey "W-7S" Moulding Shaper -- Specifications: 17-1/4"x 14" Table size, 2 HP main motor, 2-knife cutter head, 3,450 RPM spindle speed, 7" max. cutting height, 1/4" min. thickness 3/4" deep max cut.. Max moulding cap. 7" wide, max. planning cap. 7" wide. -- Complete with: Dust hood outlet, electrical disconnect, and mounted on fabricated steel stand w/casters, Multi-pass

100 HP 230/460 volt 20” x 19” inlet 9” x 28” outlet no hopper

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

Wintersteiger DSG Sonic Frame Saw

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

Specifications: 25" x 7" Cap., 7.5 HP, belt-driven cutter head set up with grooving knives for making "bead board" panels; 3/16" max. depth of cut, 8-1/2" min. stock length. -- Variable feed speed up to 23 FPM; 25" x 49" planing table w/extensions, 4-post bed supports for accurate opening via hand wheel adjustments. Complete with: Magnetic controls, dust hood with extraction outlet, and fabricated steel base.NOTE: Tooling will not be separated from the machine. This machine can be equipped with accessories available through WOODMASTER to double-up duty as a Gang Rip Saw, Drum Sander and enable the production of short moulding runs.

Woods 502M hardwood flooring machine

WOODS Planer-Matcher - Model 412 motorized, heavy duty planer-matcher with 6 heads. Ideal machine for surfacing dimension lumber or specialty products such as siding and flooring. 6" x 14" capacity, 8 knife heads; 50 hp top, 25 hp bottom, 20 hp sides; 20 hp bottom profile, 15 hp top profile. Item 32203.

Woodtech QSG 650-R-RPA 24" Widebelt (2) Heads24" width cap, Drum, Combination HeadHead configuration1st Head: Contact roll2Nd Head: Combination head (Roller and Pad)Specifications -- 24" Widebelt Service Side: Left -- Working Thickness: 3-150mm -- Minimum Working Length: 460mm -- Feed Speed: 0-19m/miMachine Frame -- Built with rectangular profiled steel beams to give a very high rigidity to the frame;Main motors positioned inside the frame in a protected position -- Machine frame is connected by high strength hardware (8.8G), and welded for maximum rigidityEquipped with & Features -- V-belt drive from main motors to sanding heads, -- Disk brakes on each sanding drum for emergency stopFeed System -- Feed table is made of steel with a surface tolerance within 0.05mm; table polished to avoid wear of the internal side of the feed belt -- Table is heat treated for accuracy and durability -- Feed speed variable in continuous from 0-19m/minNote : Extra BeltsWoodtech Model QSG 650-R-RPA 24" Widebelt

Woodtech Heavy Duty Moulder Models: WTM-330 – 12” wide – available in 4, 5 or 6 head configurations.WTM-260- 10” wide – available in 4, 5 or 6 head configurations. WTM-230 – 9” wide – available in 4, 5 or 6 head configurations.WTM-200 – 7” wide – available in 4, 5 or 6 head configurations. Electrical Requirements: Operating voltage: 460 Volt/60Hz/3 Phase Features Available: Outboard bearings on WTM-330 Pneumatic hold-downs, and side pressurePLC controlled – LCD readout Heavy duty drive motorsBelt driven spindlesAuto Lubrication Optional: Automatic Infeed Table 7000 RPM 1st Spindle - 15 HP 2nd Spindle - 15HP 3rd Spindle - 15HP 4thSpindle - 255HP 5th Spindle - 25HP 6th Spindle - 15HP 480V 3Phase Schneider Electronics

Woodtech Cabinet Door Sander

Woodtech Planer Sanders Touchscreen Operation Pneumatic Exclusion on the Planer head. Heavy Duty Planing head with anti kickback and pressure shoes - 30 HP 2 Sanding heads 1st sanding head Steel Drum - 30HP 2nd sanding head - Combi -head -rubber roll with Platen- 20 HP Dust Brush on the outfeed ABB electronics 480V 3phase Heavy duty heat treated frame

Woodtech Wide Belt Sanders Fixed Passline Bed 1st Sanding Head Steel Drum- 30 HP 2nd Sanding Head Rubber Drum- 30 HP 3rd Sanding Head 320mm Rubber Drum- 20 HP 4th Sanding Head Electronic Magnetic Segmented Platen with Chevron Belt ABB electronics 480V 3phase Heavy duty heat treated frame Optional Heads- CrossBelt, Orbital, Polishing