Woodworking Equipment For Sale

This machine needs some cleaning up. It is still used periodically in the current shop.

2014 SCMI ALFA 32C Beam Saw 230 Volt S/N AR3815

SCMI S630K Planer 10 HP Motor Straight Knives

Electric:230 Voltage 3 Phase Aporox 6.6 HP 1/4" to 5/8" collet size 6 adjustable spindle depths 4" spindle travel 29.5" throat depth 30" x 36" non-tilting cast iron table 7-7/8" vertical table movement Note: There may be some variances in the above features.

53” wide vacuum feed belt 48” load space (approx.) Belt size 53" X 102" 1st head rubber contact 29 kW, 460V, 3 phase 2nd head combination 21.4 kW, 460V, 3 phase 3rd head platen 18.5 kW, 220/380V, 3 phase 4th head panel cleaning felt type head 1.74 kW, 460V, 3 phase 5th Air cleaning heads Variable speed feed motor/gear box assembly Free-standing operator/electrical control cabinet Dust manifold included

SCMI K203 Edgebander Well maintained machine that is ready to ship!

SCMI K360 Edgebander

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i6d SECO SK-20BS 20" Vertical Band Saw Specifications: Actual throat 18-1/4". Table size 22-3/4” LR x 20-1/4" FB, with 45° Tilt. Max. height under guard 12". Blade length 155", Blade width 1". Wheel speed 800 RPM. Equipped with: 3 HP - 3,450 RPM Motor. 20” Rubber-covered cast aluminum wheels. Complete with: Work light.

Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500

Giben WNAR6 Series Twin Pusher Angular Panel Saw Cutting length rip cut 3200 mm Cutting width cross cut 2200 mm Projection height 95 mm Lateral loading lift table with direct motorized infeed and right motorized infeed 2200 mm width interior panel turning station in the rip cut section Book aligners for both long and short rip stacks 17 material clamps Split pusher in the cross cut area

Model: EB108 Active Description: cutting dimensions 4300x4400mm optimization main motor power 13,5kW scoring unit motor power 2,2kW cutting height 107mm 6 pneumatic clamps feeding speed 5-100m/min beam speed 80m/min Year: 2007

Selco WNT 200 Rear Load Panel Saw S/N 400.066.94

Selco EB80 Panel Saw This machine has already been dismantled and removed from service. It is ready to load. - 2004 Selco EB 80 - Three air flow tables - 144? cut line - Rear programmable pushing fence - 7 grippers - Auto saw height up to 80mm - 18 hp main motor - Programmable saw carriage speed for cutting and return stroke - PC controller with software

SELCO WN 6 (610) FRONT LOAD, AUTOMATIC PANEL SAW -- Specifications: 126" (3,200 mm) Overall cutting length, 126" (3,200 mm) max. pusher stroke for crosscutting,3.7" (95 mm) Maximum saw blade projection); 20 HP (15 kW) Main & 3 HP (2.2 kW) scoring motor. -- Saw Carriage:Variable saw carriage travel speed from 1 - 524 FPM (1 - 160 MPM). "DigiSet" scoring blade adjustment from the machine control. -- Pusher Fence:Electronically controlled overhead program fence with rack & pinion drive.Variable forward speed 0 - 295 FPM (0 - 90 MPM), 295 FPM (90 MPM) return speed.(7) Gripper Clamps (open up to 95 mm / 3.7"), AC Servo motor drives on both saw carriage & pusher fence. -- Operator & Machine Control:PC Front-End with "OSI" (Open Selco Interface) + Windows "WRT" (Windows Real Time) operating system.21" Flat screen monitor; standard keyboard & mouse; Ethernet PCI card, Intel microprocessor:On-board "Quick Opti" optimization (displays cutting dimensions & patterns), Data input by keyboard or possible direct downloading from office PC. Air-conditioned electrical panel: Tele-service diagnostics is possible, -- Rear of Machine:Modular roller rear machine table, (1) Automatic side/crosscut aligner mounted in the machine bed, 0' -114" (0 - 2,895 mm) stroke.Rear of machine partially enclosed for safety. -- Front of Machine: 1,500 mm (59") Long crosscut fence (front-to-back),(3) Front mounted air flotation table 78 x 25.5" (1,981 x 648 mm).(1) Common blower motor for all (3) air tables. -- Actual Model is SELCO WN 6 (610).

Ball Milling machine.

SHENG-SHING - SDM-25, ...25" Wide Belt Sander1-Head; 24" width cap.; rubber-covered contact roll; approx. 10 HP motor. -- Abrasive belt size 25" x 48" with: Air tensioning & electronic abrasive belt tracking. -- 5-1/2" Max. height opening with: Manual raise & lower; variable feed speed drive. -- Complete with: Magnetic controls & dust outlet.

--This machine is in an Auction on exfactoryauctions.com-- SHODA MAXXIM 5' x 10' 2-Head CNC Router, with Vacuum Pump – Seller states that machine was run (1) shift from 2002 - 2006, then only a few days per year since! Specifications: Table size 63” x 122” x 29” H, with 3/4” Thick Top. Travels: X-Axis 133", Y-Axis 73", & Z-Axis 10". Max. machining feed speed 590 IPM. Max. positioning speed for X & Y-Axes 1,180 IPM. Equipped with: Moving single-zone vacuum table, with Extra-hard phenolic surface, Front-to-back configuration. (2) 12 kW (16 HP) - 18,000 RPM BT-30 Air-cooled electro-spindle, with Variable spindle speeds 3,000 - 18,000 RPM, AC Inverter, Dynamic spindle braking, Air/Oil mist lubrication. 16-Position Carousel-type automatic tool changer. Features: All Axes with Extra-large precision contour linear guideways. Closed loop AC Servo drives & Precision ground ball screws. Extended extra heavy-duty bridge for full 5' x 10 table coverage. Centralized lubrication system for all spindle & roller bearings, ball screws & guides. Operator Control: FANUC "SERIES 21i-M" Mobile CNC Control, with 10.4" Display, RS-232 Port, PCMCIA Slot, (3) Axes Simultaneous control, Manual pulse generator, Inch & Metric operation, Feed rate & Spindle speed override, Helical interpolation, Full cutter compensation, Background editing features, EIO/ISO recognition. Foot pedal control. Complete with: 2001 TRAVAINI "1-501V1A-460" 40 HP Vacuum Pump, S/N S1433, with Hour meter reading 17,003 Hrs. (10) Toolholders. Dust Manifold. Dimensions without Safety Rails: 202" x 155" x 110" H. Dimensions of Vacuum Pump: 82" x 36" x 65" H.

SHODA MAXXIM 5' x 10' 2-Head CNC Router, with Vacuum Pump – Seller states that machine was run (1) shift from 2002 - 2006, then only a few days per year since!Specifications: -- Table size 63"; x 122"; x 29"; H, with 3/4"; Thick Top. -- Travels: X-Axis 133", Y-Axis 73", & Z-Axis 10". -- Max. machining feed speed 590 IPM. -- Max. positioning speed for X & Y-Axes 1,180 IPM.Equipped with: -- Moving single-zone vacuum table, with Extra-hard phenolic surface, Front-to-back configuration. -- (2) 12 kW (16 HP) - 18,000 RPM BT-30 Air-cooled electro-spindle, with Variable spindle speeds 3,000 - 18,000 RPM, AC Inverter, Dynamic spindle braking, Air/Oil mist lubrication. -- 16-Position Carousel-type automatic tool changer.Features: -- All Axes with Extra-large precision contour linear guideways. -- Closed loop AC Servo drives & Precision ground ball screws. -- Extended extra heavy-duty bridge for full 5' x 10 table coverage. -- Centralized lubrication system for all spindle & roller bearings, ball screws & guides.Operator Control: -- FANUC "SERIES 21i-M" Mobile CNC Control, with 10.4" Display, RS-232 Port, PCMCIA Slot, (3) Axes Simultaneous control, Manual pulse generator, Inch & Metric operation, Feed rate & Spindle speed override, Helical interpolation, Full cutter compensation, Background editing features, EIO/ISO recognition. -- Foot pedal control.Complete with: -- 2001 TRAVAINI "1-501V1A-460" 40 HP Vacuum Pump, S/N S1433, with Hour meter reading 17,003 Hrs. -- (10) Toolholders. -- Dust Manifold.Dimensions without Safety Rails: 202" x 155" x 110" H.Dimensions of Vacuum Pump: 82" x 36" x 65" H.

Automatic tool changer for 12 tools Large 5x12 machine bed oes not include vacuum motor

Shopbot CNC Router