Woodworking Equipment For Sale

UHLING - HP-3000: Case Clamp (Single-Bay) -- SpecificationsClamping capacity: 55" L x 96" H x 24" D; Large enough for multiple boxes; offers versatility, quick 30-Sec setup or changeover. -- Pressure Elements:(4) Dual air pod pressure bars that are pneumatically activated; counterweight balanced: Just position them effortlessly and let go; counterweight will keep them in place; no need to secure them! -- Air Pod Stroke3-1/2" Stroke of air pod with: 0 - 120 PSI Pressure adjustment. -- Vertical BeamMoves easily on roller bearings; pneumatic carriage locks with: (4) Small air cylinders from (1) control point. -- Operator Control PanelMounted on vertical beam so it is always where it is needed; single lever lock-or-unlock control & front/rear pressure selection. -- Counter SupportBy solid laminated panel opposite to pressure bars. -- Actual Model is: UHLING/Rousseau HP-3000

UHLING HP2000 Case Clamp (Pneumatic)Offers a compact, quick and easy-to-use Case Clamp.Specifications: -- 50" x 46" x 24" Clamping cap. that can handle 80% - 90% of your case good needs. -- (2) Counterweight balanced, fully adjustable horizontal dual air pod pressure bars. -- 3-1/2" Stroke with individual controls for each air pod pair. -- Roller bearing mounted carriage with pneumatic locks. -- Single lever lock or unlock control and front/rear pressure selection. -- Solid panel counter support opposite to pressure bars. -- Easy Access operator's control panel that is mounted on the vertical beam.

Cantek/Ultra GT-760ARD 30" Planer Taken out of service about 6-months ago - ready to ship!

UNIMAK 160-S 5-Foot Wide Single-Sided Hot Melt Glue Spreader for Hot Melt Glue including PURHot Melt Glue Spreader for PUR and other Hot Melt Adhesives. Panel Types: MDF, particleboard, door spar, XPS, and polystyrene sandwich panels. All kinds of panels that adhesive application is required.Glue Types: Polyurethane hot melt (PUR) glue. Unfilled EVA,Pressure Sensitive Foil Types: As roll: PVC, P.P., finish foils and CPL foils As sheet Stock: Veneer, PVC, laminate, acrylic plates and door surfacesWorking Speed: 5 - 25 meter/Min (16.4 - 82 FPM)Technical Specifications: -- Max. External Working Temperature: 180 ° C (365° F) - chromed roller. -- Working Width: 200 - 1,600 mm (7-7/8" - 63"). -- Board Thickness: 4 - 40 mm (1/8" - 1-5/8"). -- Upper Spreader Roller, Silicone Coated and Ø 240 MM (9-1/2"). -- Upper Dosing Roller: Ø 215 MM – Chromed (8-1/2"). -- Lower Transport Roller: Ø 240 MM – Silicone coated. -- Total Power: 15 kWMelter and Hose are not Included, they are optional and can be quoted separately.

UNIMAK GS140-S Single Sided Hot Melt Glue Laminator4-Foot Wide Hot Melt Glue Spreader for PUR and other Hot Melt Adhesives. Panel Types: MDF, Particleboard, door spar, XPS and Polystyrene sandwich panels. All kinds of panels where adhesive application is required.Glue Types: Polyurethane Hotmelt (PUR) glue. Unfilled EVA.Pressure Sensitive Foil Types: As roll material - PVC, P.P., finish foils and CPL foils. As sheet Stock - Veneer, PVC, laminate, acrylic sheets and door surfaces. Working Speed : 5 - 25 m/Min (16.4 - 82 FPM).Technical Specifications: -- Max. External Working Temperature: 180 ° C (365° F), Chromed Roller. -- Working Width: 200 - 1,400 mm (7-7/8" - 55"). -- Board Thickness: 4 - 210 mm (1/8" - 2-1/4"). -- Upper Spreader Roller - 240 mm (9-1/2") diameter, Silicone Coated. -- Upper Dosing Roller: 215 mm (8-1/2") dia., Chromed. -- Lower Transport Roller: 240 mm (9-1/2") diam., Silicone coated. -- Total Power: 15 kWMelter and Hose are not Included, they are optional and can be quoted separately or purchased locally.

1) 10' long Dual Lane Infeed Conveyor 2) Graco Therm-O-Flow 200 55 Gallon Drum Unloader 3) Union Series #5, Model A, 14" Hot Melt Roller Coater 4) Union Dual Lane Lay-Up Conveyor 5) Union Series #5, 14" Five (5) Nip Rotary Laminator 6) 10' long Dual Lane outfeed Conveyor

UNIQUE 280-6-9 Door Clamp -- This 6' x 9' horizontal Door Clamp Table, is designed for ALL shops to accurately square and clamp cabinet or entry doors, panels, cabinet doors, face frames, etc. -- Includes: (8) Cylinders and (3) squaring bars, one at the bottom and on each side. One or more projects may be clamped simultaneously on this diversified table. -- All 8 cylinders work, however 2 of them have a small air leak when pressure is applied.Shipping dims are 112" L x 74" W x 32" H

UNIQUE 280-3-60 Door ClampThis 3' x 6' Door Clamp Table on a 60° angle, is designed for ALL shops to accurately square and clamp cabinet or entry doors, panels, etc. -- The UNIQUE magnet and pin combination mounted air cylinders, allows the operator to move them to any location on the table. -- Includes; (4) cylinders, (1) foot valve and (1) squaring bar. One or more projects may be clamped simultaneously on this diversified table.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

UNIQUE 71 Pocket Hole Boring Machine -- The UNIQUE "71" is a Single Spindle Pocket Drill capable of producing screw holes with unlimited spacing. -- The heavy-duty industrial construction has proven to give years of service with minimal maintenance. -- Push button control. -- Brand New with Warranty!NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

UNIQUE 250 GT2 Automatic Raised Panel Door ShaperMachine to manufacture raised panel cabinet doors with (1) Operator in (2) MinutesSpecifications: -- One Piece Welded Frame is precision machined. -- Variable Speed Direct Drive 10 H.P. Shaper Motor. -- 5" of vertical stack height, capable of stacking up to (3) cutters. -- Three (3) Position Turret for quick change over between profiles. -- The change from one cutter to another is achieved via a select switch for each operation. -- Three-position pneumatic stop system positions automatically when cutters are selected -- Easy to read positioning scale allows for accurate centering of Arched panel and rail. -- Free-floating table w/pneumatic holddown has a 2-way linear movement for straight or cathedral top doors up to 55" long. -- Highly visible guards, protective clamp bar & poly-carbonate shield keep the operator protected.Complete with: -- One set of tooling included. Set includes Unique 410 cope / rail cutters and 460 panel cutter with back cutter. Also includes one template (998800) -- Please call for other options.OPTIONAL - XS Model - with 5 Position CutterIncludes extended 8" spindle, 5 positions for 5 tools5 Position quick-change turret stop, and a heavy duty stop system that allows for additional cutters.Includes the following Cutters - Raised Panel (460 cove profile) + Cope/Rail (410 bead profile) + Cope/Rail (shaker profile)

UNIQUE 250 Raised Panel Door Machine General Specs: -- 7.5 HP belt driven spindle at 7,800 RPM, 1-1/4" x 5-3/4" stackable multi-cutter spindle to mill stile, rail, & raised panel profiles.Specifications: -- 1-1/4" Spindle, stackable cutter spindle with push button indexing to significantly reduce setup time as each station is pre-set and adjustable. -- Moveable 12" x 66" rolling table w/pneumatic 66" hold-down bar, 2-way linear bearing movement for straight or cathedral top doors up to 58" long stroke. -- Currently wired for 575 Volt / 3-PhaseIncludes: -- Some tools

UNIQUE 2700 CNC CNC Door ShaperCNC Controlled Machining Center for Raised Panel Doors.Equipped with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK rails.Features: -- Windows based PC computer with large touch screen menu for quick set-up, new door or custom door stiles can be programed in minutes, automatic operation from one style and size of door to the next, straight raised panels & widths of stile or rail and end tenoning work the same. -- Electronic sensors measure the length of the part to be cut allowing for various width panels or rails to be shaped consecutively, once a door is pre-programmed it can be re-called.Complete with: Electronic brake on spindles, (2) 5" dia. outlets for dust collection and UNIQUE's Windows based "Raised Panel Door" Software. .

UNIQUE 2753 Arch Shaper with Sanding HeadThe Unique Model 2753 Is A Single End Machine Designed For High Quality, High Production, Cabinet And Passage Door Arching Of Top Rails And Panels. Its Two Counter-Rotating Spindle Motors are Easily Programmed For Multiple Cuts With Hogging And Finishing Cutters To Eliminate Tear-Our And Extend Tool Life. A Sanding Station Provides A Multi-Pass Sanding Finish On Arched Door Panel Profiles. Unique “ArchPro"; Software Guarantees High-Speed Measuring And Fully Dynamic Programming Abilities.• Shaper Motor: (2) 10 HP Himmel Direct Drive , 440V - 39.2A, 3PH Motor• 5" Stack Height • Compressed Air Requirements: 90 PSI - 2 CFM• Dust Collection: (2) 5" Diameter 1200 CFM each (1) 4" Diameter 800 CFM each• Work Height: 3’6"• Machine Footprint: 113" Width X 78" DepthIncludes - Safety Mats, Dust Collection Manifold, and Owner's Manual

UNIQUE - 2700: Door Shaper; CNC NC Controlled Machining Center for: Raised panel doors. Motor: 7-1/2 HP Belt driven. CNC Controlled 5" stackable vertical spindle (max. 4-tools per stack). Max clamping thickness: 2-1/2". 6" Max cutterhead diameter. "X" Axis of spindle: Travels 81" on (2) THK rails with Ball Screw Movement. "Y" Axis with: 5" Travel on THK Rails with 5" Max Work Piece Overhang "Z" Axis with: 5" Max. travel on THK rails. Windows™ Based Computer with: Large touchscreen. Unique's Windows™ Based "Raised Panel Door" software. Electronic brake on spindles. (2) 5" Dia. outlets for dust collection. Owners Manuel included. Dimensions: 69" L x 139" W x 69" H. Weight: 3,000 Lbs. No tooling included unless otherwise specified. NOTE: Machine needs to be serviced & recommissioned.

UNIQUE - 110: T-Moulding ApplicatorSpecifications -- Table size: 32"; x 48"; x 35"; H.Machine Dimensions: 48" x 32" x 38" H.Machine with Pallet Dimensions: 48" x 40" x 43" H.

UNIQUE 79 Face Frame Assembly Table. The UNIQUE Face Frame Assembly System simplifies the assembling process. -- This is to ensure flush alignment of frames reguardless of thickness of material. -- Major face sanding is eliminated. -- 60° Laminated 5' x 8' assembly table, squaring bar. -- Over arm with (5) hold down clamps.

UNIQUE 285 Door Clamp This 6' x 12' Door Clamp Table, is designed for ALL shops to accurately square and clamp cabinet or entry doors, panels, etc. -- This table set at a 60° angle allows (2) operators to work side by side. -- The UNIQUE magnet and pin combination mounted air cylinders, allows the operator to move them to any location on the table. -- One or more projects may be clamped simultaneously on this diversified table. -- Includes; (10) Cylinders and (2) squaring bars and (2) Foot valves to accomodate (2) operators. -- Options; Overarm with (5) cylinders and (1) Foot valve. -- (4) zone operation with center squaring bar, (2) extra foot valves and (6) extra clamps...ask Product Manager

UNIQUE 73 Pocket Boring MachineThe UNIQUE "73" Drill Tub is a pocket drill capable of producing screw holes with unlimited spacing. -- Heavy-duty industrial construction has proven to give years of service with minimal maintenance. Push button control. -- Double spindle boring tub, 2 drills with counterbore.NOT IN STOCK - PRICING SUBJECT TO CONFIRMATION.

Unique 250 MC Raised Panel Door Machine Seller’s Specfication: - Cathedral and Crown Patterns Included - 50? capacity - 5HP main motor - 1-1/4? stackable mliti-cutter spindle to stile/ rail and raised panel profiles - Puch button preset indexing at each station, table w/ pneumatic hold-downs - 2-axis linear movements for straight or cathedral top doors and dust collector hood

UNIQUE 80 Face Frame Assembly. The UNIQUE Face Frame Assembly System simplifies the assembling process. -- This is to ensure flush alignment of frames regardless of thickness of material. -- Major face sanding is eliminated. -- 60° Laminated 5' x 12' assembly table, squaring bar. -- Over arm with 5 hold down clamps.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.