Woodworking Equipment For Sale

--In Auction: https://exfactoryauctions.com/Detail/CR-230068/event/A122024$1 --No Reserve!-- TAYLOR 800036 7' W 12-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (71) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: Pneumatic Panel Flattener. Pneumatic Clamp Tightener.

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

TAYLOR - 16-Section: Hydraulic Automatic Clamp Carrier8-1/2 Feet capacity; (16) sections. -- (6) Clamps per section but sold with: (96) total clamps; 32" max. opening; 2-1/2" high jaws. -- Heavy dual Hydraulic Drive for automatic rotation. -- Automatic pneumatic panel flattening & hydraulic clamp tightening. -- Operator applies: Glue to the stock; loads parts for clamping; then unloads. - The rest is automatic.Tightening assembly with: Panel flatteners automatically advance to each clamp; flattens the panel & tightens the clamp; moves on to the next clamp. -- Operator. controls: Start & Finish. NOTE: Machine originally with (28) sections; reduced to (16) sections. There are approx. (70) additional Clamps available.Machine already torn down; ready to ship!

TAYLOR 40 Section Clamp Carrier.Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pallet of spares that require repair, 32" clamps with 2-1/2" high jaws .Complete with: -- Heavy Duty Drive for rotation,& clamp tightening. -- Foot pedal control. -- Includes a glue applicator.

TAYLOR - 800036: 7' W, 12-Section Semiautomatic Pneumatic Clamp Carrier with Flattener & TightenerEquipped with: -- (71) 32"; Cap. Clamps with: 4-5/8"; W x 3-1/2"; H Jaws. -- Air motor drive. -- Dual foot pedal control.Complete with: -- Pneumatic Panel Flattener. -- Pneumatic Clamp Tightener.

TERCO NORTHSTAR 10-8 Spindle Carver.8-Spindle Carver with 10" center-to-center chuck spacing. -- (2) 0.5 HP - 3,450 RPM spindle motor direct "belt drives" spindles for 11,000 RPM rotation. -- 36" Long carving cap, with optional length extensions up to 72". -- Manual rotation for round parts. -- Operator manually traces the pattern details of the master with copying stylus. -- Capable of doing both base relief (flat backed) and 360° full round carving. -- Includes: (1) Set roughing bits, (2) sets finishing bits, tools, and manual.

THERMWOOD - C67: 5-Axis CNC Router (5 x 10) -- Specifications5' Wide x 10' deep moving table design.Head travel & rotation: X-Axis (table travel). = 124"; Y-axis (gantry travel) = 62"; Z-axis= 36"; rotational axis = 360°; tilt axis = 270°. -- Equipped with: (1) 12 HP "HSD" "Liquid Cooled" electro spindle; programmable variable speed from 3,000 - 24,000 RPM, LH/RH rotation. -- Operator Interface THERMWOOD Series "91000 Super Control" controller; handheld programmer & programmable spindle speed option.Air conditioned; standalone control cabinet.Compatible with major CAD/CAM & offline CNC programming systems. -- Included Options Electromagnets for work holding metal parts. Transformer. Machine customized to use MQL coolant for purposes of drilling & light machining aluminum. Programmable spindle speed.

THERMWOOD CS 45-510 CNC Router with ATC & BORING:5' x 10' Moving Gantry with a machined aluminum table, single-zone acrylic vacuum plenum, and manual material stops around the table perimeter. -- Equipped with: (1) 10 HP HSD BT-30 Type spindle, variable spindle speed from 3,000 - 24,000 RPM.(13) Total ATC positions, with (1) 5-position ATC Plate, mounted at the machine head; (1) 8-position rear mount wine rack ATC. (1) 9-spindle Vertical Boring, with (9) independent spindles on 32 mm centers. -- Features: High performance closed loop AC Servo motors driving precision ball screws on all axes with feed speeds up to 1,200 IPM on the X- & Y-axis and 600 IPM on the Z-axis. Way & ball screw bearings serviced by an automatic lubrication system. -- Operator Interface: THERMWOOD Gen 2 "SuperControl" with Windows 10 operating system. "E-Cabinet" software ready, 3-axis simultaneous motion, handheld programmer with pulse generator and for feed rate and spindle speed override. 15" Color monitor, 20.4 GB hard drive. CD ROM drive, 3-1/2" floppy disk drive, 83-key/101-Qwerty keyboard for data entry, network card and RS-232 port for PC communications; mounted in an air conditioned Nema rated control cabinet. -- Comes complete with: (1) 15 HP Vacuum pump, original documentation, and manuals.

Thermwood C42 CNC Router (2) 5'x5' Tables It has 2 large routers, 4 smaller routers, and 2 aggregate heads in the turret Travainni Vacuum Pump Note from Seller: Includes two shaper heads that are not mounted into the turret and one pneumatic drill head that is not mounted into the turret. I also have one seat of Microvellum cabinetry program that I will transfer to you along with the purchase.

MLS Number 11772789 2015 Thermwood FB53-510 CNC Router Very good working condition Low hours. Used for only 1 year. Excellent condition Moving gantry, fixed table, roller hold down CNC router Designed to machine low profile sheet materials(MDF, plywood, particleboard) Uses Microsoft Windows 10 Professional operating system

Thermwood Model M90-510 5-Axis CNC Router Less then 20 hours on this system - only installed and training. Ready to be removed!

5X10 table typewriter style tool changer at the head. 5 tools bar style tool change 4 tools c - axis at the head also for aggregate tools. 480V/60HZ

Thomas Return Conveyor This was used behind a Holzher Edgebander

Timesaver Mdl 337-6 36" Belt Sander S/N 18395

TimeSaver Mdl 325-2 36" Wide Belt Sander S/N 7887

Only 697 hours, taken from service (2) top heads - one orbit, one brush (1) 3HP main orbit motor (1) 3HP feed motor (1) 1HP brush motor (1) 1HP oscillation motor 460V Max. stock width 36" Max. thickness 6" 32-38" variable passline height 2,000 CFM @ 5,000 FPM exhaust air requirements

Timesavers Model 2321-24-01 Sander 43"x75" Belts 2-Head IceClean System on each head

Timesavers Model 2331-04-334 3-Head Orbital Sander 43" Machine

Timesavers Single Head Sander Combination Head Model 2311-45-6 Includes transformer

Timesavers 37" Planer Sander Helical Planer Head