Woodworking Equipment For Sale

Woodtek 2 Spindle Boring Machine

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6m WYSONG & MILES 284 Automatic Vertical Hollow Chisel Mortiser Specifications: Max. chisel dia. 1-1/4", Max. bit dia. 5/8". Throat 6-1/4”. Max. distance from table to chisel 16". Table size 8” x 42”, with Tilt 45° Left & Right. Longitudinal table travel 13", Cross table travel 3-3/4", Vertical table travel 12". Max. chisel stroke 4-1/4". Speeds 15, 30, & 45 SPM. Equipped with: 5 HP - 3,480 RPM Spindle Motor. 1-1/2 HP Feed motor. (2) Stroke stops. Spacing gauge, with (6) Adjustable spring stops. Screw clamp. (2) Hold-downs. Foot pedal for Single stroke or continuous operation. Complete with: Fence.

Wysong & Miles NO. 284 Vertical Chisel MortiserSpecifications -- 1-Head, 5 HP direct drive motor, rack & pinion table adjustment; -- Table size 8" x 42" and tilts to right or left up to 45ø, -- Moves 13" laterally, 12" vertically and 3-3/4" cross-line. -- Max.depth 4-1/4", max. chisel shank 1-1/8" dia., smaller chisel require bushing, 5/8" straight bit chuck.Equipped with n& Features -- The table is raised and lowered by means of a crank. -- A quick acting screw type clamp holds material securely in position , smaller chisel require bushing, 5/8" straight bit chuck.Note from the seller -- Having spent it's entire life in humid Florida this 284 has a Levi’s blue jean patina on it’s painted surfaces and well seasoned cast iron from environment and age. Quiet running! Mechanical power feed,

Used YAMAMOTO 30-opening, premium quality, Plywood Hot Press. -- 500 Tons pressing capacity. -- Daylight is 4.7"(120mm). -- Press plates are 54" x 108" x 1.5" (1,370 x 2,700 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with accumulation tank. -- Heated by steam. -- Professional removal and loading available at Buyer's cost.

Used YAMAMOTO 45-opening, premium quality, Plywood Hot Press. -- 500 Tons Pressure Capacity. -- Daylight is 2.75" (70 mm). -- Press Platens are 106" x 53" x 1.57" (2,700 x 1,350 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with accumulation tank. -- Heated by steam. -- This particular press was only operated for about 1-1/2 years. -- Professional removal and loading available at Buyer's cost.

Yaskawa Motoman UP50N Robot YR-UP50N-A00 Payload 50kg Control Box Teach Pendant Yaskawa Motoman UP50N Robot Type: YR-UP50N-A00 Payload 50kg

The frame is a massive, compact and solid casting which takes less floor space for its capacity The feed drive is built to stand up under the hardest kind of services The feed rolls are of such design that the advantages of the open side type of construction are combined with of the advantages of the inside The top and bottom head assemblies are of the most substantial construction The top head chip breaker is made of chilled cast iron section, each section being spring loaded and adjustable The side head spindles are short and of large diameter The side head chipbreaker moves in and out with the head and is also provided with an additional screw adjustment for close setting The bedding is continuous throughout the entire length of the machine

Yates-American A-20 planer. 4 sided with profile machine, 10" rolls, tongue and groove heads. Includes 10 cylinder Deutz engine, belt drive assembly, extra heads, Newman planer infeed with spiral rolls. As/is-where/is, as removed from service. Price Reduced $39,000. 

Yates American E-12 End Matcher System for tongue and groove flooring includes: Belt, Straight Line Blade, 3-blades, Infeed conveyor to end matcher, transfer conveyor from first machine to second machine, variable speed outfeed conveyor

Yates American B-15 Helical Head Planer S/N 29658

Planer Head Set Up Stand

220v 3 phase 2hp motor Controls work, motor runs and spindle turns Spindle raising mechanism has pin sheared in bevel gear. Includes overarm casting & mobile base.

Yates American B24 Planer

Yates American B-26 Top/Bottom Planer 24” capacity Each head has (10) straight knives and are jointed on the fly 460 volt 3- phase

YATES AMERICAN B-26 Top & Bottom Rough Lumber Planer24" x 4" Opening cap., 3/4" to 4" thickness capacity; 46" minimum unbutted length capacity;Specifications: -- (1) 75 HP DMD motor power hoisted top head, (1) 40 HP DMD motor bottom head, 8" dia. cutting circle at 3,450 RPM. -- 40 HP Hydraulic power unit for variable feed rate from 75 to 400 FPM, 12" dia. Urethane tire top feed rolls, 12" dia. non-powered lower rolls. Equipped with: -- Carbide spiral cutterheads, automatic pressure bar release (hydraulically operated), hydraulic top & bottom headlocks, anti-lap bar device, air tensioned & released chipbreaker. -- Complete with: Built-in top & bottom jointers, dust hoods, electrically interlocked safety guards, and small remote operator's console.

YATES AMERICAN - B-26: Top & Bottom Rough Lumber Planer24" x 4" Opening cap.; 3/4" - 4" thickness capacity; 46" min. unbutted length capacity.Specifications -- (1) 75 HP DMD Motor power hoisted top head; (1) 40 HP DMD motor bottom head; 8" dia. cutting circle at 3,450 RPM. -- 2 HP Hydraulic power unit; variable feed rate: 75 - 400 FPM; 12" dia. urethane tire top feed rolls; 12" dia. non-powered lower rolls. Equipped with: -- 10-Knife Carbide cutterheads; automatic pressure bar release (hydraulically operated); hydraulic top & bottom headlocks; anti-lap bar device; air tensioned & released chipbreaker.Complete with: -- Built-in top & bottom jointers. -- Dust hoods (not shown on picture). -- Electrically interlocked safety guards. -- Top infeed /outfeed rubber rollers.

YATES-AMERICAN - B-244: 30" Planer30" x 8" Cap., 7-1/2 HP - 3,600 RPM direct drive motor; 4-knife 4-1/4" dia. cutterhead; 1/8" min. material thickness; 11" min. unbutted stock length; 3-1/4" min. butted stock length. -- 30" x 40" Cast iron table bed; manual raise-and-lower on (2) 1-3" /8 dia. hoist screws; belt drive feed system; variable speed 25 - 70 FPM; (2) 4" dia. powered upper rollers with: Sectional top in feed roll; (2) 4" dia. bed rollers; sectional chipbreaker. Fully restored in 2025 -- 240 VAC, 3 Phase, 3600 RPM; 7-1/2 HP direct drive cutterhead motor; 3/4 HP separate drive train motor. -- 4-Wheel drive: All (4) rollers are powered for stock feed. -- Segmented infeed roll & chip breaker: Both rebuilt with: New springs; spring caps; graphite lubricant. -- (2) New, hardened 52100 steel bearing shafts; heat treated at SW Metal Treating in Fort Worth; precision ground at Fort Worth Centerless grinding. -- Fully repaired & insulated leads on the motor stator. Stator was fully checked at "T-Gray Electric" in Dallas; all tests passed. Results report included. -- Upgraded threaded riser shafts from: 1-1/4" to 1-3/8". -- Improved REEVES Drive motor mount collar. -- Rebuilt drive train motor with: New bearings. -- New TIMKEN cutterhead bearings; new needle bearings where required. -- Dynamically balanced cutterhead and motor rotor assembly. -- New cutterhead knives. -- Rebuilt power transfer shaft housing. -- New transmission frame & speed adjustment linkage. -- Rebuilt speed control knob. -- (2) new drive train chains. -- Everything: Fully stripped, degreased, derusted, primed, painted. -- Custom start button console. -- Table & table rollers: Residual rust pitting that does not affect performance or surface finish. -- Custom dust chute with: 8" hose adapter.

Yates-American Planer Mdl. 415M, S/N: 25264, $30,000

ZEETECH - 200, ...Universal Hopper Feeder that can be mounted to all Moulders. - Capacity: 3/4" - 9-1/2" width, 0.38" - 5" max. material height, 10" min. length. -- Oil-free air operated drive unit mounted on THOMPSON hardened ways, damped drive travel, positive sensing sequencing actuator. -- Variable speed range from 0 - 120 FPM @ 80 - 120 PSI. -- Includes: All air logic controls (no power required) and air filters; easy to install.