Woodworking Equipment For Sale

US CONCEPTS CHB-16 HauncherThe CHB-16 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 16". (Also available in 20" capacity) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 42" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

US CONCEPTS FAS 100 Arch ShaperHorizontal Arch Shaper for curved mouldings. This heavy-duty machine consistently cuts curved profiles by using a special floating feed system that registers on the outside edge of the curved blank. Specifications: -- 31" X 49" Table size, 7.5 HP main motor, 1-1/4" spindles, 6,500 RPM-Shaping, 1,600 RPM-Sanding.5" Max. cutting width, 6-1/2" max. cutter dia., 0.75 HP variable speed DC feed motor, (5) horizontal feed rolls; cast iron table. -- The FAS uses digital counters to adjust axial & cutting height adjustments accurately. This combination allows you to cut any shape moulding such as radius or ellipse and even a closed profile such as a full circle or oval. -- For added flexibility, the lower cutterhead speed offers the opportunity to sand these profiles after cutting.

US - CONCEPTS - FAS 100, ... Arch Moulding ShaperSpecifications: -- Table size: 28" x 46" x 34" H . -- Spindle dia.: 1-1/4". -- Spindle speed: 6,500 RPM. -- Max. cutting width: 4"; max. cutter dia.: 6-1/2".Equipped with & Features: -- 7.5 HP Spindle motor, 0.5 HP variable speed DC feed motor. -- Mobile base with (4) Swivel casters.Dimensions: 50" x 32" x 60" H.

75 HP 550 Volt 3 phase

Vac-U-Clamp FT900 Thermafoil mPress Brand new - Seller never used it!

Vac-U-Clamp FT800+ Thermofoil Press 52" x 105" Work area Dispenser Rack (3) Vac bags new in boxes still

VAC-U-CLAMP FT-1000 52" x 123" Dual Shuttle Table Thermofoil Vacuum Press Overall OEM Specifications: Typical cycle time 5.5 - 7 Min. averaging 7 - 8 Cycles/Hr., Approx. conservative production with 18 Parts/Cycle & 126 Parts/Hr., 1,000 Parts/Day, 5,000 Parts/Week. Table Configuration: (2) Shuttle tables (when one table is in press oven, other table is being loaded or unloaded), Table entry & exit completely automatic & powered by CNC-controlled gear-driven stepper motor. Construction: TIG-welded aluminum tubing covered with 18 GA steel covers that have been powder coated for durability, Aluminum platen easily removable for cleaning if necessary, Easy-access table 36" H. Heating: (24) 1000 W Quartz infrared type lamps, Infrared thermocouple for accurate reading film temperature. Features: Automatic film pressure bar opening/closing connected to safety circuit preventing table movement if bar is not completely closed, Automatic high pressure cooling air as tables exit from oven, Tempered glass viewing window with 300 W Interior halogen light. Includes: 45 CFM Vacuum Pump capable of producing near absolute vacuum (14.7 PSI, 29.9 in. Hg.), 30 Gallon ASME-certified vacuum reserve tank for rapid evacuation & decrease of cycle time, Vacuum lines rated for 3,000 PSI. Operator Controls: OMRON PLC Control, with Color touchscreen display, (5) Storage bays for different film type programs, & Remote access through built-in remote wireless modem. Complete with: (2) 61” W 3-tiered double-sided steel roll racks, Each with (2) Locking swivel & (2) Swivel 3-1/4” Dia. x 1” W Casters, Rack dimensions 76" x 32" x 41" H. NOTE: (1) Shuttle Table Not Installed & in Crate. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

ADVANCE MANUFACTURING VACUMIZER M-100 Vacuum CoaterModel M-100 Vacuumizer Continuous Feed Thru Vacuum Finisher, -- 71/2 Hp Vacuum Pump, Capacity : 2" X 6" openingNote: Transformer for 600 volts included

Convert your Edgebander from its standard Glue Pot system to PUR Slot Die Extrusion system usingVALCO MELTON'S HOT MELT/PUR EXTRUSION SYSTEM With up to 60 mm wide Glue Line Coverage The "IsoMelt Mini" melting tank is used for this proposal, it will be able to melt and pump around 10 Lbs of adhesive per hour. The IsoMelt Mini has a completely enclosed reservoir, which seals off the PUR from moisture in the atmosphere. To ensure that no moisture enters the reservoir, there is a small PLC program that injects dry air on a timed basis into the reservoir. The external MCP-6 pattern controller will process the photo-eye input and encoder signal measuring the machine speed. The pump will deliver adhesive to the head. A sensor mounted upstream from the applicator head will "see" the edge of the board coming through the system and triggers the valve to fire at the appropriate time and shut off at the appropriate time, ensuring that glue is accurately placed. An encoder is included for the speed feedback necessary for precise pattern placement. The head itself will need to be mounted in place of your current glue pot.Should you decide to go with this solution, we will provide you with drawings of the mount to make sure there are no issues with the fit before we take your machine down for the install.Also to expedite frequent changeover of part thickness and the importance of machine up-time, this proposal includes the motorized part thickness adjustment. It eliminates the need for operators to adjust the coating width on each setup.Components Required:1 946XX052 IsoMelt Mini, 4 cc/rev pump, 53 Lbs (24kG)/Hr, 2 exit NI1201 968XX167 Clearcut 60 edgebanding head (adjustable up to 60 mm wide)1 N/A Motorized option for edgebanding head including. . . 988xx894 controller, 912xx860 cable kit, 912xx027 unit communication cable1 988XM859 Uni-Flow Pneumatic Control for IsoMelt Mini1 913XX876 NV-10A level sensor board1 913XX513 Level sensor M30X1,51 780XX149 Heated hose, 2300/3000 Series,1/2-inch X 16-ft, 240 V1 074XX056 MCP-6 pattern control1 155XX341 1000 Pulse Encoder Kit (rigid encoder bracket)1 029XX511 Encoder splitter, Y-adapter to D series hot melt unit1 030XX632 Encoder cable, 8 m, 8-pin DIN1 280XX256 Fixed-field sensor, 4-inch (100-mm) range, with 581XX484 mounting bracket1 030XX596 Scanner cable, 10 m, flying leads 1 030XX882 Valve cable, 10 m, female reverse key to flying leads1 799XX716 Tank fittings kit, qty 2, straight #8 hose core1 799XX713 Tank fittings kit, qty 2, 45-degree #8 hose core 10 795XX550 InsulationPrice is for all of the items required to convert your Edgebander to an efficient PUR machine. Labor prices not included.

Brand New Hot Melt Adhesive Melter that can be adapted to your existing equipment.The 200 L Drum Unloader is designed for the application of any type of adhesive delivered in 200-liter drums, the EDrum Series Unloaders are extremely versatile and include several customizable options that adapt to each user's specific requirements.Features: Safer working environment with optional platen protection system and vent hood. Reduced downtime related to drum changes with new drum fastening system. Customizable to specific users needs Integrated grammage dosing control. Teflon encapsulated seals.Technical Specifications: System 200L flat platen or 200L finned platen Drum capacity 200 liters Melting capacity flat platen system 60 Kg/Hr Melting capacity finned platen 130 Kg/Hr Max. number of pumps is two (2) Working temperature 30 - 240° C (86 - 464° F) Max. working viscosity 100,000 CPS Max. working pressure 100 Bar Electrical consumption 24 kWWe can also supply a selection of accessories to integrate & fit the Bulk Melter to your existing equipment, including: RTD hot melt hoses Slot Die applicators Edge Bander PUR retrofit Slot Die kits Manual and Automatic dispensing valves Mounting bracket packages Solid State Pattern Control Systems In-Line Filters Replacement parts for competitive systemsHose sizes will vary depending on your application; please speak with our sales representatives regarding that, below are a few Options: 8' long - #6 core 12' long - #6 core 16' long - #6 core 8' long - #8 core 12' long - #8 core 16' long - #8 core 8' long - #12 core 12' long - #12 core 16' long - #12 core Delivery from date of order approximately 10 WeeksAll parts and service are based in the USA out of Cincinnati Ohio.

Brand New Hot melt adhesive melter that can be adapted to your existing equipment.The 20 L Pail Unloader is designed for the application of any type of adhesive delivered in 200-liter drums, the B-Pail Series Unloaders are extremely versatile and include several customizable options that adapt to each user's specific requirements.Features: Safer working environment with optional platen protection system and vent hood. Reduced downtime related to drum changes with new drum fastening system. Customizable to specific users needs Integrated grammage control. Teflon encapsulated seals.Technical Specifications: System 20L flat platen or 20L finned platen Drum capacity 20 liters Melting capacity flat platen system 8 Kg/h Melting capacity finned platen 25 Kg/h Max. number of pumps is one (1) Working temperature 30 - 240 Centigrade (86 F - 464 F) Max. working viscosity 100,000 cps Max. working pressure 100 bar Electrical consumption 8 KwWe can also supply all of your need's for accessories to make the Fit Up to your equipment including: RTD hot melt hoses Slot die applicators Edge Bander PUR retrofit slot die kits Manual and automatic dispensing valves Mounting bracket packages Solid state pattern control systems In-Line filters Replacement parts for competitive systemsSince Hose sizes will vary depending on your application please speak with our sales representatives regarding that, below are a few Options: 8' long - #6 core $461.00 12' long - #6 core $646.00 16' long - #6 core $750.00 8' long - #8 core $748.00 12' long - #8 core $957.00 16' long - #8 core $1,065 8' long - #12 core $835.00 12' long - #12 core $916.00 16' long - #12 core $1,158.00Delivery from date of order approximately 8 WeeksAll parts and service are based in the USA out of Cincinnati Ohio.

PUR Adhesive MelterValco Meltons IsoMelt Series has been specifically designed to process reactive hot melts such as PUR. Fast and easy changes to EVA or APAO with out adhesive degradation are no problem. The tank can accommodate 2 PUR standard bags, so that IsoMelt units can work with up to 40 liters of adhesive and meet the high production requirements of the woodworking, PVC and aluminum industries.These units are an ideal solution for profile wrapping, edge-banding and post forming. Easy removal of adhesive residue permits switching between PUR and other types of adhesive giving you the flexibility you need.Some Features : Air-Tight tank opening and blowing system Faster and safer cleaning due to its tilt-able tank and removable melting grid. Dry air blanket prevents moisture from reaching the adhesive Integrated grammage control accessible through a muti-function controller that simplifies operator programming. Apply the coating weight PreciselyEquipment Specifications: Tank capacity 40 liters Melting capacity 35 Kg/h Max.pumping capacity per pump 48 Kg/h Number of pumps two (2) Working temperature 30°c - 230°c (86°f - 446°f) Max. Working viscosity 100,000 cps Max. working hydraulic pressure 100 bar Max. Electrical consumption 6,200 W Adhesive types PUR / EVA / APAOWe can also supply all of your need's for accessories to make the Fit Up to your existing equipment including: RTD hot melt hoses Slot die applicators Edge Bander PUR retrofit slot die kits Manual and automatic dispensing valves Mounting bracket packages Solid state pattern control systems In-Line filters Replacement parts for competitive systemsSince Hose sizes will vary depending on your application please speak with our sales representatives regarding that, below are a few Options: 8' long - #6 core $461.00 12' long - #6 core $646.00 16' long - #6 core $750.00 8' long - #8 core $748.00 12' long - #8 core $957.00 16' long - #8 core $1,065 8' long - #12 core $835.00 12' long - #12 core $916.00 16' long - #12 core $1,158.00Delivery from date of order approximately 8 WeeksAll parts and service are based in the USA out of Cincinnati Ohio.

VALITON D550 Compressed Tenon Machine NOTE: Missing Cam. Equipped with: 1-1/2 HP - 1,740 RPM - 208-220/440 V Dual voltage motor.

VALTORTA FV-P Stain Roll Coater51" Width cap., single head roll coater 1.5 HP variable conveyor speed 80 - 100 FPM.

The Vantec 2800mm Spindleless Veneer Lathe is designed to process veneer for plywood production from both hard and soft logs. Its metal tempered grooved rollers and lathe knife inclination system work perfectly to make sure there will always be a precise contact area between the lathe knife and the log during the peeling process by eliminating vibration that could cause damage to the Veneer sheets. Vantec Spindleless lathe proves its efficiency by delivering consistent thickness variation and a impressive top linear speed of 180 m/ min throughout the peeling process for face or core veneers with smooth surfaces. - Log diameter up to 600 mm; - Max log length: 2750 mm; - Min log Length: 2300mm; (with stacker) - Min log length:1800mm (no stacker); - Veneer thickness: 1.0 to 4.0 mm; (Pine and eucalyptus); - Log core after peeling: 40 to 45mm; - Maximum linear speed 180 m/min; - Drive panel included; - Each motor is individually connected by a Variable Speed Drive for torque control in two points of traction on the rollers to pre- vent excessive load on tip ends; - Log Central aligner with maximum of 2200 mm of movement; - Pneumatic scriber Knives (02 fitted on the sides to cut in width and 01 in the Center to cut the length); - Width: 7640 mm; - Length: 3400 mm; - Height: 2550 mm; - Approximate weight: 14000 kg.

The Vantec Veneer Auto Stacker, ELV 1.82B is a Vacuum stacker for 2800 mm Veneer lathe. It is fitted with double stacking system (04 bins), with four veneer transport lines and four 5hp exhausters. with of two stoppers and eight ejecting arms. With drive Panel, VSD for exhaust fans and hydraulics lifting tables. Min veneer sheet length sheet: 2300 mm; • Max veneer sheet length sheet: 2700 mm (or Two sheets of 1350mm); • Min veneer sheet width: 800 mm; • Max veneer sheet width: 1500 mm; • Max height of stacks: 1000 mm; • Exhaust motor: 10 hp 4P (8x); • Inlet conveyor motor: 2hp 8P; • Transport conveyor motor: 6hp 4P; • Hydraulic pump motor: 5hp 4P (3x);

The Vantec Automatic Rotary clipper is designed to clip 2800 mm veneer sheets into specific sheet sizes as per the auto stacker preselection. It comes with electronic drive panel, automatic gauge system, positioning of clipper knife by Servomotor and encoder. It is de- signed to work with one tensioned clipper knife with gear motor. It also comes with a 2 HP motor on the output. The clipper knife is not included. - Veneer Thickness : 1 to 4 mm; - Max. Log: 2.750mm; - Minimum veneer width cut: 800 mm; - Max. Veneer length cut: 2700 mm; - Min. Veneer length cut: 700 mm; - Min. Venner rounding length: 150 mm; - Rotor gear motor: helical gears; - Clpper rollers power drive: 4 hp 6P; - Outlet conveyor Motor: 2hp 4P (input) 1 hp 8P (output); - Clipper Servomotor: 40 Nm (2x); - Width: 4800 mm; - Length: 6000 mm; - Height: 1700 mm; - Approximate weight: 7.000 kg

Weeke BHP 007/430 CNC Router 13 HP HSK 63F Spindle with air blast nozzles 8 Position Rack Style ATC 7 Spindle Boring Block 4x8 Table Part location pins (2) Becker 7 HP vacuum pumps Woodwop Light Barrier safety system

Weeke BHP 007/430 CNC Router 13 HP HSK 63F Spindle with air blast nozzles 8 Position Rack Style ATC 7 Spindle Boring Block 4x8 Table Part location pins (2) Becker 7 HP vacuum pumps Woodwop Light Barrier safety system

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5h VANTEDGE MM 6.5 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): + EVA & Polyolefin Adhesive ready. Specifications: Working Capacity: Edgebanding thickness 0.4 - 3 mm coil stock capacity & 10 mm strip capacity. Min. panel width 85 mm (3.3"); min. panel length 125 mm (4.9"); panel thickness 10 - 60 mm (0.39" - 2.36"). Tape and Panel Infeed System: 750 mm Coil support table; adjustable track feed speed 14, 16 & 20 MPM (66 FPM). Heavy-Duty large solid polished steel panel infeed fence guide system. Large industrial digital adjustment for the Premill panel material removal amount. Top Pressure Beam Adjustment: Automatic adjustment from the PLC control; pneumatic Pop-Up Stop system. Red LED panel feed indicator light for correct panel spacing. Equipped with: Dual 3 HP Pre-milling motors w/diamond cutter heads; pneumatic "JUMP In/Out function. Misting unit prior to Pre-milling; large dual dust housing ports to help clean the Pre-milling system. Quick change Glue Reservoir for EVA & PO glues; Pressure Section/Infrared Heat Lamp System. Heavy-Duty automatic shear type Guillotine with: "Auto-Set" automatic intervention for strip & coil materials. (4) Pneumatic polished Pressure Rollers with manual digital adjustment to edge thickness. (1) Rubber infeed Tape Roller, (1) metal infeed Tape Roller; direct Universal Drive system - NO Chains. Teflon-coated glue pot; digital thermostats with automatic kick down when the machine is in idle mode. Workstations: End Trimming Unit: Dual 0.5 kW (0.67 HP) high frequency End Trim motors on precision "Auto Lube" Linear Guideways; 90° to 10° pneumatic tilt cut adjustment. Electronic sensors to safely monitor motor positions; thumb screw pneumatic adjustments for simplicity. Tilting Super Finish Top & Bottom Trimming Station: Dual High Frequency 0.65 kW (0.75 HP) motors with Combi Finish insert tooling.Top Servo driven positioning of motors for different edge trimming profiles & positions. Corner Rounding Unit: Motors on precision billet aluminum swing tracer arms with pneumatic guidance and Face Copy System. (2) Independent motors can be adjusted to match tape thickness via digital scales. Profile Scraping Unit: Top, bottom & side Copy Wheels to properly follow your panels edge. Panel Nesting System: Triple Copy System for panels with blind dados & hinge cup holes. Digital adjustment for fine-tuning the unit to the proper tape thickness. Flat Scraping Unit: Large copy wheels. Buffing Unit: Top & bottom Buffing Unit; 0.5 HP (0.37 kW) - 2,800 RPM motors; units tilt 0° - 30°. Dual Hot Air Blowers: To re-embellish edge materials. Operator Interface 10" Color touchscreen PLC with swivel Control Panel. The PLC controls all working units & the adhesive thermostats with 1-touch icon programmable selections. Photo indicator alarms to easily troubleshoot errors/issues. Complete with: I