Woodworking Equipment For Sale

4 Head drill station 20' with powered roll case Hydraulic set stops

-In Auction- PHELPS FAN 30 HV-1 7-1/2 HP Material Handling Blower Specifications: -Inlet dia. 18". -Outlet size 7" x 14-1/2". -Speed 1,900 RPM. Equipped with: -7-1/2 HP - 1,755 RPM - 230/460 V Dual voltage TEFC premium efficiency inverter duty motor, Certified for hazardous locations.

Pillar MMTJ Miter Door Machine

Pinheiro MF/EF 630 Top and Bottom Planer

The seller has confirmed that this Pinheiro planer is in good working/running condition. - Double sided planer with side saw - Complete package - Manual - no year...Motor HP 20 bottom, 10 top

(2) 2-1/2 HP motors 5/8” arbors 12” blade capacity max width 3 - 5/16” nax depth 2-5/8”

PISTORIUS HM-1-S VERTICAL HAUNCHING MACHINEVertical hauncher/notcher with 7-1/2 HP drive motor and high speed spindle with 1-1/4" arbor dia. x 4" long, with maximum Cutter Diameter of 8 inch.Features: Heavy-duty precision linear bearing ways, pneumatically operated via foot pedal activation.

12” blades 1-1/2 HP motors - 3 phase foot pedal control

PMK C 1205 Single End Coping Machine -- With the C-1205 Coping Machine you can run your Styles first or run your cope first, this machine using a 7.5 HP motor has counter rotating spindles to insure Chip free coping of either square. -- Single profiled or double profiled parts. Since we are only coping one end at a time the length doesn't matter. We can also cope more than one part at a time up to 13.5" wide on the C-1205. -- Two counter-rotating spindles 1.25" in Diameter. -- Capacity of maximum (2) cutters on stack tooling -- Spindle Speed 7,000 RPM; cycle time approx. (4) Seconds. -- Side Pressure Clamp to insure proper alignment with a fence. -- Cutter Heads totally enclosed for Safety!

PMK C 1203 Single End Coping/Tenoning Machine -- With the C-1203 Coping Machine you can run stiles first or cope first, this machine using a 5 HP motor has counter rotating spindles to insure chip free coping of either square, single profiled or double profiled parts. -- Since we are only coping one end at a time the length doesn't matter. We can also cope more than one part at a time up to 9.5" wide on the C-1203. -- (2) Counter rotating spindles 1.25" diameter. -- Spindle Speed 7,000 RPM; cycle time approx. (4) seconds. -- Side Pressure Clamp to insure proper alignment with fence. -- Cutter Heads totally enclosed for Safety!

Pneumafil 13.5 460-10 304 Stainless Steel Reverse Air Bag House, 5,922 SQ/FT Cloth Media, 47,000 CFM @ 8:1 Air/Cloth Ratio, Very Good Condition, $82,000.00

Porter Planer Model 700 S/N 5916, Straight Knifes 10HP Motor

Porter 715-A Top surface planerPorter Surfacemaster 715 Planer is ideal for for flattening and prepping lumberSpecifications -- 15HP, 3PH, 230/460V --3/4HP Elevation Motor -- Chain Driven Carpet Feed -- 24″ Wide Cutterhead with Dispozablade Knives(Comes with ITCH head as a alternate option) -- 8" Max Thickness Capacity -- Power Elevation -- Wixey Thickness DRO -- Spike InfeedEquipped with & Features -- Magnetic Start/Stop -- 6" Dust PortWeight is approx 6500lbsNOTE: This surfacer is a beast, and will operate with very little vibration due to its large cast iron frame. These machines are known to make chips, and are excellent for prepping or surfacing lumber. Machine was used prior in a cabinet shop, and is being sold as it was replaced with a double side planer.

Porter 165 Double Sided Buck Shaper --4" Long spindle --, 8" vertical & 5" horizontal travel, interchangeable 3/4" spindle, -- 3 HP motor, 12,000 - 18,000 RPM.Will also include a Grizzly HP G4181 power feeder.

Accepts 3/4", 1", & 1-1/4" Dia. interchangeable spindles, 5.5 HP motor; 3,625 - 5,000 - 7,250 - 10,000 Spindle speeds. -- 4" Cap. under nut when using the 1-1/4" spindle, 6-19/64" spindle stroke; Approx. 39-1/2" x 31-1/2" extra thick cast iron main table, -- Complete with: Adjustable split fence, spring hold downs, removable table inserts, dust collection shroud, reversing switch, spindle brake, and cutterhead guard. -- Includes: Infeed and outfeed tables shown in picture. - Note: Needs some work on bearings.

POWERMATIC 26 SINGLE SPINDLE SHAPER -- Specifications: 5 HP (3.7 kW) - 3,600 RPM belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley, with reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" Cap. under the nut and 3" spindle travel w/hand wheel adjustment -- Complete with:24" x 26" Cast iron table w/miter slot, 7" insert opening, adjustable fence, and Magnetic controls. -- Actual Model is POWERMATIC 26

POWERMATIC Shaper TS-29, with Sliding Table & Tilting SpindleSpecifications: -- 3/4", 1", & 1-1/4" Dia. interchangeable tilting spindle, 3/8" & 1/2" collet & router bit adapters, tilts 45° forward and 5° back, 7-1/2 HP - 3,600 RPM motor; 3,000 - 4,000 - 6,000 - 8,000 - 10,000 RPM spindle speeds via 4-step V-pulley with "quick release". -- 4-3/4" Cap. under nut when using the 1-1/4" spindle, 7-1/16" spindle travel; 51-1/2" x 33-1/2" extra thick cast iron main table, (3) removable table inserts 2-1/2" - 5-1/2" & 5-7/8" x 4-3/16" (oval).Complete with: -- Large scale "ACCU Fence" with integrated 4" dust collection shroud, reversing switch, AMBI-TECH electronic brake, cutterhead guard, clamping miter gauge & magnetic control; incl. owners manual & parts list. Actual Model # 1791284

POWERMATIC 26 SINGLE SPINDLE SHAPER -- Specifications: 5 HP - 3,600 RPM belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley, with reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" Cap. under the nut and 3" spindle travel w/hand wheel adjustment -- Complete with: 24" x 26" Cast iron table w/miter slot and 7" insert opening. -- Equipped with: Adjustable Fence, and Magnetic controls, 4-Roll 4-speed Power Feeder .

POWERMATIC Shaper PM 2700, Spindle Shaper model 128-0102C 5 HP, Single Phase, 230 V - 1280101-CSpecifications & Features: -- Digital readout gives the use of exact spindle height and allows for 0.001" adjustments. -- 4" Spindle travel. -- 5 HP Motor -- Heavy-duty 30" x 40" precision ground tabletop for smooth stock feeding and Heavy-duty cast iron base. Includes: -- 3/4" and 1-1/4" spindles -- Independently adjustable fence sides. -- Micro-adjust control knobs allow for precision adjustment for the fence. -- Integrated casters can be raised and lowered to mobilize shaper. -- Superior clear cutter guard promotes safety, allows observation of the entire cut. -- Table predrilled and tapped for Power Feeder mounting.Dust Collection Minimum CFM Required (CFM) 600; 4"Dust Port Outside Diameter

POWERMATIC 221 PLANER WITH BYRD HELICAL HEAD20" x 8" Cap., 10 HP TEFC belted drive motor, BYRD Helical cutterhead, hand wheel micro-adjust table; 1 HP feed motor for variable speed from 20 - 50 FPM, segmented infeed roll and sectional chipbreaker, 4" dia. smooth outfeed roll. -- Complete with: Magnetic starter and dust hood.