Woodworking Equipment For Sale
1689 Results Found
$ 4,950
HOLZ-HER - 1435-SE EDGEBANDER"1906" Cartridge Glue System; 5 mm edge thickness cap. (up to 8 mm w/optional tooling); automatic magazine coil & strips; 3 mm PVC cap. pneumatic guillotine for coil cutoff. Workstations: -- Double-motor end trim, (2) 0.3 HP - 9,000 RPM motor ea.; chamfers 0° - 10°. -- Universal top & bottom fine trim (for bevels from 0° - 15°); allows simultaneous bevel & profile trimming; (2) 0.8 HP - 18,000 RPM motor ea.; all trim motors are 0.6 kW HF - 300 Cy. -- Top & Bottom PVC scraper unit for 0.8 - 5 mm radius; air jets for blowoff. -- Top & Bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed: 35 FPM.Complete with: Built-in Operator Control Panel; outboard panel support; frequency converter; used tooling; and sound enclosure.
$ 5,750
HOLZ-HER 1435-SE EDGEBANDERCartridge glue system, 5 mm edge thickness cap. (up to 8 mm w/optional tooling), automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff.Workstations: -- Double motor end trim (2) 0.3 HP - 9,000 RPM motor ea.), chamfers 0° - 10° -- Universal top & bottom fine trim (for bevels from 0° - 15°) allows simultaneous bevel & profile trimming, (2) 0.8 HP - 18,000 RPM motor each; all trim motors are 0.6 kW HF - 300 Cy. -- Top & bottom PVC scraper unit for 0.8 - 5 mm radius, with air jets for blowoff. -- Top & bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed 35 FPM. --Complete with: --Built-in operator control panel, outboard panel support, frequency converter, used tooling, and sound enclosure.
$ 7,750
HOLZ-HER -143 5-SE, ...EdgebanderCartridge glue system; 5 mm edge thickness cap.; up to 8 mm cap. w/optional tooling; automatic magazine coil & strips; 3 mm PVC cap. pneumatic guillotine for coil cutoff. Workstations: -- Double-motor end trim, (2) 0.3 HP - 9,000 RPM motor ea.; chamfers 0° - 10°. -- Universal Top & Bottom fine trim; bevels from 0° - 15°; allows simultaneous bevel & profile trimming; (2) 0.8 HP - 18,000 RPM motor each; all trim motors: 0.6 kW HF - 300 Cy. -- Top & Bottom PVC scraper unit: 0.8 - 5 mm radius; air jets for blowoff. -- Top & Bottom "jump" buffing; 0.3 HP - 1,620 RPM ea. -- Single feed speed: 35 FPM.Complete with: -- Built-in operator control panel; outboard panel support; frequency converter; used tooling; sound enclosure.
$ 6,750
HOLZ-HER 1435-SE EdgebanderCartridge glue system, 5 mm edge thickness cap. (up to 8 mm w/optional tooling), automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff.Workstations: -- Double motor end trim (2) 0.3 HP - 9,000 RPM motor ea.), chamfers 0° - 10°. -- Universal top & bottom fine trim (for bevels from 0° - 15°) allows simultaneous bevel & profile trimming, (2) 0.8 HP - 18,000 RPM motor each; all trim motors are 0.6 kW HF - 300 Cy. -- Top & bottom PVC scraper unit for 0.8 - 5 mm radius, with air jets for blowoff. -- Top & bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed 35 FPM.Complete with: -- Built-in operator control panel, outboard panel support, frequency converter, used tooling, and sound enclosure.
$ 14,750
HOLZ-HER - 1321 Sprint, ...Edgebander with: Premill & Corner Rounding Workstations - (633) Operating Hours!Specifications: -- 0.4 - 15 mm (0.02" - 0.59") Edgebanding thickness; 3 mm (0.12") max. coil thickness; 15 mm (0.59") max. strip thickness. -- 55 mm (2.17") Edgebanding height. -- 6 - 50 mm (0.24" - 1.97") Panel thickness; 60 mm (2.36") min. panel width; 180 mm (7.09") Min. panel length. -- 35-1/2" Feed chain height; 18 MPM (59 FPM) feed speed; 14" outboard support adjustment.Equipped with: -- "1961" Premilling unit with: (2) 2 kW (2-3/4 HP) - 12,000 RPM - 200 Hz Motors; Up & down cutting modes; 5 mm (0.20") Plunge travel. -- 820 mm (32.28") Dia. Coil table. -- "1903" Automatic edge magazine; for solid edges, strips, & coiled material; 40 mm (1.57") max. loading capacity. -- "1906" Cartridge type gluing application system; for EVA & PUR glue with 3-1/2 Min heat-up time; automatic recharge 4-Cartridge Magazine cap. -- Pressure section with: (1) Large driven roll & (2) small idler rolls; all rolls with pneumatic individual control via PLC. -- Microprocessor PLC Control with: 5" LCD Display, touchpad, PLC for edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, buffing; manual operation without a program. -- Sound enclosure.Workstations: -- "1918" Front & rear end trim unit with: (2) 0.35 kW (1/2 HP) - 9,000 RPM - 300 Hz Motors; 0° - 10° horizontal & vertical tilt. -- "1823" Top & bottom flush trim unit with: (2) 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motors. -- "1824" Multifunctional trim unit (flush trim/radius/chamfer) with: (2) 0.35 kW (1/2 HP) - 9,000 RPM - 300 Hz Motors; 5 mm (0.20") max. radii & flush trim; 5 mm (0.20") x 45° max. chamfer. -- "1929" Top & bottom PVC profile scrape unit with: Reversible insert carbide knives & 3 mm (0.12") max. radii. -- "1983" Single-motor profile trim (corner rounding) unit with: 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motor. -- "1964" Pneumatically controlled top & bottom glue scrape unit. -- "1944" Top & bottom buffing unit with: (2) 0.20 kW (1/4 HP) - 1,670 RPM motors & 45° swivel.Dimensions of this specific machine with outboard support extended: 252" x 63" x 70" H.
Call for Price
HOLZ-HER 1321 SPRINT EDGEBANDER WITH PRE-MILLING & CORNER ROUNDING Specifications: 0.3 - 15 mm Thickness edgebanding capability (3 mm coil or 15 mm max. strip); 6 - 50 mm panel thickness, workpiece width min. of 60 mm; workpiece Length min. 180 mm; Feed speed 12.5 MPM (41 FPM). -- Programmable Logic Control (PLC) for Edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Programs can be easily created and recalled at will; screen with graphic interface makes programming easy, icon of each unit may be brought up on the screen to show the operator the status of the unit and the parameters which can be programmed; Edgebander can be operated manually when required, without necessity to write a program.Machine configuration: -- Pre-milling station "1961", (2) 2.0 kW - 12,000 RPM motors; "1903" Edge strip Magazine; (1) Universal magazine for solid edges, strips, and coiled material.Utilizes motion detector to ensure accurate, trouble-free positioning of edge material; exclusive "Tractor-Belt feed System", edge guide equipped with automatic guillotine lock-out for safety, 3° approach angle allows easy feeding of large wood edges. -- "1906-M" Gluing Station - Cartridge System: Servo controlled pressure section with (1) large driven roller & (2) cantered idle rollers.Workstations: -- "1918 HF" Front & rear end trim unit (0.35 kW - 9,000 RPM motor each), Uni-Point axis for no re-indexing when changing from flush to bevel end trim (0° - 10° bevel),"PCS" Pneumatic Changeover from flush to bevel from control panel. -- Top & bottom flush trim unit "1823" (0.6 kW - 300 Cy HF motors 18,000 RPM Motor ea.), SIKO digital readouts. -- "1942-M" Servo controlled Top & Bottom combination flush/chamfer & radius unit (0.6 kW - 18,000 RPM each motor), Uni-Point design for no second adjustment when changing the degree of bevel, air jets for debris removal, digital counters, and includes 2-position "PCS" Pneumatic Changeover System from flush to radius from control panel. -- "1929" Servo controlled Top & bottom PVC scrape station: Reversible insert carbide knives, equipped with air-jet blowers; "PCS" Pneumatic Changeover System moves Scraper Unit in-and-out from control panel; Chip Collector Box. -- "1832" 1-Motor Corner Rounding unit: For edges up to 3 mm edge thickness; incl. Tooling R = 3 mm. -- Pneumatic controlled Top & Bottom glue scrape station -- "1940" Top & bottom buffing station: Possible to adjust in any direction (vertical tilt is 0° - 5°, horizontal Swivel is 0° - 20°); 1,440 RPM wheel rotation.Equipped with: -- Microprocessor for line control & glue temperature, 10 KVA frequency changer, outboard panel support, and sound enclosure w/interior lights over enclosed workstations of the machine, & used tooling on the stations.
Call for Price
HOLZ-HER 1329 SPRINT PERFORMANCE EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + EVA/PUR GLUING TECHNOLOGY: -- Specifications:Features the HOLZ-HER Patented Dual "GLU-JET" EVA & PÜR Zero Joint Technology System.Edge thickness min./max. 0.4 - 12 mm (0.016 - 0.472"); coiled material 0.4 - 3 mm (0.016 - 0.157").Panel thickness 8 - 60 mm (0.236 - 2.362"); workpiece width min. of 60 mm (2.36"); workpiece length min. 160 mm (6.29"). Programmable Logic Control (PLC) for Pre milling, edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Pre milling Station (1802):(2) 2.0 kW (2.68 HP) - 12,000 RPM motors; equipped with: "ProLock" quick change flange including height adjustment for optimum utilization of cutters. -- Edge Magazine (1901):Small 3° feed angle thanks to nozzle design with easy feeding of coils, strips & up to 3 mm and solid wood edging up to 15 mm (0.059").Exclusive "Tractor-Belt Feed System", edge guide equipped with automatic guillotine lock-out for safety. -- Pressure Section (1913 Mot):Servo-controlled pressure section with (1) large driven roller and (2) cantered idle rollers. Straight and tapered pressure rollers for perfect glued joints. -- Gluing System (GJ301 Auto):"GLU JET" Hybrid Technology "thin film technology processes EVA or PÜR Glue in cartridge or granulate form.Motorized, programmable glue nozzle (upper glue line) height positioning. Automatic reload of the glue cartridges or granulated. Workstations: -- End Trimming Unit (1918-P):Front & Rear - (2) 0.35 kW (0.5 HP) - 9,000 RPM motor each; unipoint swivel axis for no re-indexing when changing from flush to bevel end trim (0° - 10° bevel)."PCS" programmable pneumatic changeover from flush to bevel. -- Multi-Function Trimming Unit (1827MOT4): (2) 0.65 kW (0.87 HP) - 12,000 RPM each motor, Servo motors: (1) for horizontal copy wheel & (1) for tool spindle position; programmable top & bottom unit. Unipoint design with no second adjustment with pneumatic, programmable tilt action for changing the degree of bevel.Digital counters for vertical copy wheel position and pneumatic air cylinder for in/out pre-positioning of trimming motor. -- Corner Rounding Unit (1833 MOT4):(2) motors with 0.22 kW (0.30 HP) - 9,000 RPM, for linear edge trimming or vertical corner rounding with (4) Servo programmable positioning motors; Up to 3 mm edge thickness and workpiece thickness min./max.8 - 60 mm (0.31 - 2.36"); max. feed speed 18 MPM (59 FMP) up to 25 mm panel thickness; 26 - 38 mm panel thickness,16 MPM (52 FPM); 39 - 60 mm panel thickness, 2 MPM (6 FPM). -- Profile Scraping Unit (1929-MOT2): Top/Bottom Servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives.Equipped with air jet blowers and chip collector box. -- Glue Scraping Unit (1964):Flat, Top/Bottom, ball bearing guided and pneumatic controlled. -- Buffing Station (1940):Top & Bottom buffing motors with - 150 mm
HOLZ-HER - 1432, ...CP/B Edgebander (Compact) -- Cartridge glue system (single cartridge system); edge thickness cap.: 0.3 to 3 mm (1/8"); max. banding height: 2"; min. panel width: 60 mm; min. length: 180 mm.Equipped with: -- Semiautomatic feed magazine; coil stock feeds automatically with guillotine cutoff; all strip stock is fed manually with pusher bar to advance the edging.Workstations: -- Single motor end trim for leading & trailing edge (trim motor recently replaced). -- Top & bottom flush/bevel trim: 1 HP - 28,000 RPM Motor ea. (recently replaced with BOSCH Trimmer motors). -- Top & Bottom buffing unit: 0.3 HP - 1,620 RPM ea. motor; equipped with: Cotton flap wheels. -- Single feed speed: 16-1/2 FPM.Complete with: -- Sound/safety enclosure; outboard panel support. - Machine is on casters.
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Holz-her 1255 Panel Saw Digital Readout capacity 169” x 74” 2.36 depth of cut 3 KW motor rotates 90^
Call for Price
Year: 2008 Excellent Condition HolzHer Triathlon 1488 Edge Bander Ligmatec Return Conveyor Manual Included Description: PreMill Front & Rear Trim Saws Top & Bottom Rough Cutter Top & Bottom Combination Finish Cutter 3mm Corner Rounding Edge Scraping Edge Buffing Variable Speed 8-18 mpm 8-60mm panel thickness Electrical: 230V 3Phase
Call for Price
Call for Price
Manufacturer Specs Edging feed # 1806 Glue applicator 1906 MG Pressure unit 1912-1 end trimer 1822 Cutter unit 1825 This edgebander is located in a 2-man shop and has very low hours
Call for Price
Manufacturer Specs - Cartridge glue system, automatic magazine coil & strips (1903), 3 mm PVC capacity. - Pneumatic guillotine for coil cutoff. - Double-motor end trim (1918), chamfers 0° - 10°, includes pcs changeover system. - Universal top & bottom fine trim (1942m) for bevels from 0° - 15°; allows simultaneous bevel & profile trimming top & bottom. - PVC scraper unit (1929) with 3mm inserts. - Top & bottom buffing (1940). - Complete with PLC for easy setup & program storage. - Fixed outboard panel support. - Solid state frequency converter and sound enclosure.
Holz-her 1243 Slider Tigerstop Includes: (2) Cutting blades and scoring blades, some misc tooling
HOLZ-HER - 1619, ...Boring Machine (Construction & Line Boring) -- Specifications:(19) Spindles on 32 mm centers; bores vertically from top and horizontally from the rear; repositions via manual air shock assisted tilting.2 HP Motor with: 2,800 RPM Gear driven boring head. -- Features:4-Position turret style depth stop for boring depth and a 4-3/4" max. stroke of boring head.24-3/4" Working width; 27-1/8" max. panel width; 19-1/2"; x 38"; x 32-1/2"; H table size. -- Equipped & Complete with:RH & LH Indexing fence with flip stops; (2) indexing pins (for continuous line boring); (3) 4" dia. pneumatic holddown clamps; foot pedal actuator; magnetic push button starter. -- Actual Model is: HOLZ-HER 1619Dimensions of this specific machine with pallet: 52" x 40" x 65" H.Dimensions of this specific machine when vertical: 52" x 37" x 60" H.Dimensions of this specific machine when horizontal: 52" x 51" x 46" H.
Call for Price
Overall Length: 19.37' Workpiece thickness min./max (inch): 1.77? Edging thickness(inch): 0.01-0.12? Edging height max (inch): 1.97? Cut edging length min. (inch): 13.78? Workpiece with min. 9inch): 2.36? Workpiece length min. (inch): 7.09? Feed Speed (m/min). 8 Pre-milling cutter unit (m3/h): 900 Flush trim: 280 scraper unit: 280 static underpressure: – pre-milling cutter unit: 1490 flush trim unit:1650 Compressed Air (bar): 6 Features: The SPRINT 1317 series is equipped as standard with the 1906M cartridge glue application system -Fast change of glue -Ready to start in 3.5 minutes -One of a kind – the 1905 MULTI-SYSTEM -Advanced Glue Application System – for a secure joint -Profile trimming at the press of a button HOLZ-HER Control System – high standards safeguard it for the future ¦ Powerful PLC control for rational set-up and operation. ¦ User friendly interface – all information in plain text