Woodworking Equipment For Sale

WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 17 - 78 FPM, powered by a 4 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 460 Voltage / 3 Phase Power using 79 Full Load Amps. -- Includes - All heads, rollers, setup tools shown are included, Owner's Manual, and 4-hose Dust manifold.This machine runs perfectly, is in Good Condition- with some dents to the outer sound enclosure. Overall Dimensions: 132"; x 64"; x 64";Approx. 8,000LBSRemoval is responsibility of buyer. Seller can build a crate, and put it on a truck for an additional $1,000.00

WEINIG UNIMAT 818 S Feed Through Moulder 6-Head (B-R-L-T-T-B), working dimension 12-3/16" x 6- 5/16".Capacity: -- Working width 3/4" - 12-3/16" -- Working thickness 5/16" - 6-5/16" -- feed speed-variable with 10 HP inverter 20 - 200 FPM Head sequence: -- Bottom 25 HP, right 15 HP, left 15 HP, top 30 HP, top 30 HP, and bottom 30 HP motor; all motors with electronic spindle brakes. -- Spindle dia. 1-13/16" with cutter head speed of 6,000 RPM; -- outboard bearings on spindles #1, #4, #5 & #6. Electronic LED digital readouts for all spindlesJointer: -- Head # 1 Bottom straight jointer manual, remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 -1/16"; With outboard bearing 4 3/4"; For tool circle 6 1/16"- 7-1/16" -- Head # 2 Right spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 3 Left spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 4 Top spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 1/16"; With outboard bearing 4-3/4"; For tool circle 6-1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- Head # 5 Bottom spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12-1/16"; With outboard bearing 4-3/4"; For tool circle 6 1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- (4) Jointer cassettes for profile jointer, length 6" -- (2) Jointer cassettes for profile jointer, length 9" -- (1) Set of jointing stoneReadouts: -- Digiset (double mechanical readouts) for left and top radial adjustments. One readout is for the tool size and the other for the finished wood dimension (with Imperial inch adjustment -- Mechanical readouts on all other axes. Side pressure roller: -- (10) Driven feed roller shaft from above -- (5) Driven steel rollers in the machine table -- Axial setting range of the feed rollers opposite left spindle, 1-3/8" -- Extension of the feed shaft opposite the left spindle to 8 -1/4 in. -- Axial setting range of vertical spindle 3-1/8 in. Axial setting range of horizontal spindle 1 -3/4 in. (1st bottom 3/8 in.) -- All spindles diameter 1 -13/16" -- (6) Additional set of spacing collars, clamping length 6-11/16", diameter 1-13/16" -- Pressure shoe in front of 1st left spindle receding from tool, incl. lateral roller pressure, pneumatic -- Receding chip breaker in front of 1st top spindle, pneumatic. -- Pressure shoe in front of and guide after top spindle with mechanical digital displays

WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.

Weinig Powermat 1000 Moulder - 8,000 rpm machine out of production 2/2024. Converted from 12,000 RPM. - Working cap.: 9-1/16” x 4-3/4” - Motors: B-15 HP, R-15 HP, L-15 HP, T-30 HP, T- 40 HP and B-30 HP. - Spindles/Tool Holders: Spindle 1-13/16" at 8,000 RPM; HSK tool holders 2-6 8,000 RPM. Motorized tool positioning for tools 2-6 Radial and Axial. - CNC: WEINIG Power Com "Touch Screen” PLUS software with tool data storage 300 profiles, profile data and tool monitoring. Led readouts to all spindles/tool holders; including chipbreaker’s and holddown’s. Modem for external diagnostics. - Feed: Variable inverter drive speed with 7.5 HP motor with speeds from 18-118 FPM. - Infeed/Tables: 2M (6'-6”) infeed table with side pressure roller, AUTO table lubrication and chromed tables and fences.

Weinig R960 Profile Grinder Measuring Stand Complete tooling room included!

Weinig Unit 318 Moulder 9" Machine 6-Head Low hours! Also available: Weinig R960 Grinder and tool room

Weinig Powermat 1500 Moulder 7-head Machine Manufacturer specs (to be confirmed): Operating voltage (single) 460 Volt, 60 Cycles Tool arrangement no. 013 Working width 20 - 230 mm FIRST BOTTOM - Motor 11 KW (15 HP) / 1 13/16" / 6000 rpm Marathon coating for table insert RIGHT VERT - Motor 11 KW (15 HP) / 7000 rpm Diameter 40mm Setting range axial 80mm LEFT VERT - Motor 11 KW (15 HP) / 8000 rpm Vario hood (2 axes) Pressure shoe in front of left, incl. 2 lateral rollers, spring-mounted Setting range of the feed rollers opposite left tool holder Pressure roller from above, pivoting, spring loaded Axial / Radial CNC-controlled adjustment SECOND RIGHT - Motor 11KW (15 HP) Fence lip before and after the right vertical spindle Axial / Radial CNC-controlled adjustment FIRST TOP SPINDLE-MOTOR 22 KW (30HP) - 7000 rpm Vario Hood (2 axes) Split pressure shoe in front of top spindle with Axial / Radial CNC-controlled adjustment SECOND TOP - Motor 18.5 KW (25HP)/ 7000 rpm Split pressure shoe in front of top spindle Axial / Radial CNC-controlled adjustment Top spindle prepared cassette system. LAST BOTTOM - Motor 22 KW (30 HP) / 7000 rpm Adjustment range axial & radial FEED SYSTEM - Motor 7 KW (9.5 HP) / 5 - 40 m/min. Feed roller in front of 1st bottom, pneumatic up-down Electrical up-down adjustment of the feed bar Two interior lights in the safety hood Remote Lock out / Tag out Lateral pressure roller at the infeed table, spring-mounted Guiding fence after the left vertical spindle 6 mm thick PowerCom Plus Improved sound insulation MACHINE CHANGE: 06.10.2019 - Please be aware that the VarioHood assembly on the 1st Top Spindle was moved to the 2nd Top Spindle position. The 2nd Top Standard Hood was moved to the 1st Top Spindle Position. This move will impact the parts relating to the Aspiration Hood, ChipBreaker and Pressure Shoe elements. Please use caution when looking up replacement parts. This machine change was performed by WUSA technicians

Weinig Quattromat Q23V 4-Head Through Feed MoulderHead Configuration : (B-R-L-T) Profile or "S4S" Moulder,Specifications: -- 9-1/16" x 4-3/4" cap. -- Spindle sequence: Bottom 5.5 HP, right / left heads 7.5 HP , top 5.5 HP motor. -- Spindles 1-1/2" dia. at 6,000 RPM, mechanical digital readouts for setting accuracy. -- Feed speed of 26 FPM, 1 HP feed drive, direct drive.Equipped with & Features -- 6'- 6" Infeed straightening table with adjustable fence, table inserts for right and left heads. -- Sound insulated safety hood.Technical specifications: -- Machine dimensions 120" x 48" x 62", -- Electrical requirement (95 Amps) at 230 volts, 60cy. 3ph., -- Dust collection 4,500 CFM and Shipping weight 3,500 Lbs.

Weinig U-17-AL 5 head moulder Bottom Right Left Bottom

Weinig Profimat 22 N Moulder Work ready

WEINIG PROFIMAT 22N Feed Through Moulder/Grinder Package Specifications: -- 5-Head (B-R-L-T-B), working width 8-5/8" x 4-3/4". -- Head sequence: Bottom 10 HP, right/ left 10 HP, top 15 HP, and bottom 10 HP motor. -- Spindle dia. of 1-1/2" with cutterhead speed of 6,000 RPM. -- Features: Mechanical digital readouts on all spindles; Digital readouts on left & top spindle. -- Feed speed variable from 18 - 78 FPM, 3 HP feed drive. (1) Powered table roller in machine bed at out feed. -- Complete with: Infeed straightening table 2 M (6'-6") and side pressure roller mounted to infeed table. -- Manual table lubrication pump, manuals sound & safety enclosure and dust collection manifold . -- Includes seventeen heads, extra feed wheels and neoprene feed wheels, as shown in Photos. -- Seller is also including the Owner's Manual.WEINIG RONDAMAT 934 Profile Grinder: -- 9" Arbor length, 11-1/2" max. tool dia., 1.5 HP motor, tilting head assembly for back relief grinding, clearance angle on peripheral of tools 10° - 30° and to each side 0° - 20°. -- Variable feed speed 1,800 - 3,000 rpm via a vari-speed gearbox, on-board wheel dressing, 9" max. wheel dia.; 0.16 HP coolant pump with built-in coolant tank. -- Includes: Operators manual, clamping nut, and pull-off bolt, 1-1/2" arbor, and an extra set of grinding wheels and toolingWEINIG OCMS measuring stand (not shown): -- With a working width of 300 mm. -- The allowable tool dimension of 3" to 11-3/4" head diameter. The measuring stand allows for electronic measuring and indicating of cutter head dimensions with electronic digital readouts; visually establishing the tool measurement, no setting errors, and no expensive CNC control. -- Magnifier screen viewer with 20:1 magnification; the cutterhead is placed in Powerlock tool post, all the operator does is view the scope and move the measuring carriage via precision dialing left to right. -- Measured values (radial) and (axial), tool dimensions both minimum and maximum are displayed. -- Includes: 1-1/2" arbor.These machines came out of a Mom and Pop shop and have been very well maintained. Both machines are in great working condition, and have no running issues.

Weinig Profimat 23E 5 head moulder Bottom Right Left Top Bottom Complete with Weinig Rondamat 950 profile grinder. 460 volt 3-phase Clean machines from a low volume specialty shop.

WEINIG Unimat 500 Classic Feed Through Moulder5-Heads, working capacity 230 x 120 mm (9-1/16" x 4-3/4"). -- Head Sequence: Bottom 4 kW (5.5HP), right & left 4 kW (5.5 HP), top 5.5 kW (7.5 HP), top 5.5 kW (7.5 HP), and bottom 4 kW (5.5 HP) motor. -- Spindles: Dia. 40 mm (1-9/16")with cutter head speed of 6,000 RPM;digital readouts on spindle adjustments in combination with the WEINIG MEMORY SYSTEM. Motorized height & width adjustment of spindles. Tool diameter 1st spindle min/max 125-145 mm (4-15/16" - 5-11/16"), other heads 112-200 mm (4-7/16" - 7-7/8"). -- WEINIG Powerlocktool holding system on top heads. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. --Variable feed speed 5 to 30 m/Min (16-98 FPM), driven by 5 kW (7.5 HP) motor. Overhead feed wheels with pneumatic pressure. Cardan drive. -- MachineTables: Made of hardened steel. Infeed straightening table is 2,000mm (6.5') with adjustable fence & adjustable outfeed table; (1) side pressure roller mounted to infeed table. -- Complete with: WEINIG MEMORY SYSTEM-reduces set-up time by storing spindle positions and tool radii, Full sound/safety enclosure with illumination inside, Central lubrication with manual lubrication pump, Automatic star delta starters, CE Compliance, and (2) Emergency stop buttons.

Weinig Powermat 700 Moulder Measuring stand, tooling and spare parts as pictured Never connected to power...ready to load!

Good Condition 230V 60Hz

Weinig Powermat 1000 Year: 2006 Condition: very good, taken out of service in April 2024, operating at full production at that time. Several wear parts have been replaced in the last year and service by Weinig technicians. Sale includes $29,000 of new parts not yet installed. Machine information: 6-Head with HSK spindles (B,R,L,T,T,B) 12,000 RPM Capacity: 9-1/16" x 4.75" Weinig PowerCom touch screen control Feed: 62 FPM

Hyd. hi-speed horizontal ripping, planing or moulding w/feed speed up to 330 FPM, 5 heads installed (originally 7-head), Standard 9" width. Auto Waxilit bed oiler. Includes feed rolls. tooling, spare parts, & hydraulics & dust collection manifold, Well- maintained, still used daily ! Come check it out prior to 8/26. More equipment coming up for grabs soon. Available by Sept. 2024 570 758 2597

WEINIG/MARK DUNIGAN DESIGN COMPANY ELCF-12 2-1/2' x 12' Lateral Chain Moulder FeederSpecifications: -- Deck width 12'.Equipped with: -- (8) 2-1/2"; W x 2-1/2' L x 33-3/4"; H Stainless steel feed chains, with 3 HP - 1,760 RPM TEFC Motor. -- (2) Top coated feed rolls, with Variable feed speeds. -- (5) Manually-adjustable hold-down plates. -- Control, with LCD Feed rate display, & TELEMECANIQUE "SR B201FU" Sequence controller with LCD Display.

WEINIG POWERMAT 1000 6-Head Feed Through MoulderSpecifications: -- B-R-L-T-T-B. -- Working cap. 230 x 160 mm (9.05" x 6.30"). -- Variable feed speeds 5 - 30 MPM (16 - 98 FPM).Equipped with: -- Head Sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 50 HP, Top 50 HP, & Bottom 50 HP Motors, with Electronic "SMART" Brakes. -- Heads #1 - #6, with "PowerLock" Toolholders, Spindle speed 8,000 RPM, High precision bearings, & LCD readouts for all toolholder settings, including chipbreakers & pressure elements. -- Heads #2 & #3, with Axial adjustment 2-3/16" & Adjustable table plates to cutting circles. -- Heads #2 - #6, with Radial & Axial Motorized tool positioning. -- Heads #4 & #5, with Radial adjustment & Split pressure shoes, Independant chipbreaker adjustment & Pressure element. -- Head #3 Chipbreaker with Pressure shoe from above & laterally. -- Head #5, with Motorized feed beam adjustment with independent adjustment. -- Overhead feed wheels, with Pneumatic pressure. -- Cardan drive, with 15 HP Motor & Inverter. -- Hardened infeed bed plates before & after Head #1. -- Extension of pendulum shaft opposite Head #3, extended to 150 mm (5.91"). -- (2) Powered rollers in table, (1) between Heads #4 & #5 & (1) after Head #6. -- 1.5 M (59.06") Infeed straightening table, with fence. -- Central lubrication. -- Automatic bed lubrication pump. -- Full sound/safety enclosure. -- WEINIG "PowerCom" Touchscreen controls, with: Profile drawing storage, Profile dimensions, Tool changes, & Production optimization.Complete with: -- Accessories & Tooling (As pictured).

Wemhoner Variopress