Glue Equipment For Sale

ACCU-SYSTEMS - DD: Handheld Glue & Dowel InserterSpecifications -- Dowel diameter: 5 - 10 mm (0.20" - 0.39"); dowel length: 25 - 38 mm (0.98" - 1.50"). -- Currently setup for: 8 mm Dia. x 30 mm L (0.31" dia. x 1.18" L) Dowels.Equipped with: -- Microprocessor-controlled glue & dowel gun (for repetitive cycles) with: Dowel reject slide; insertion speed (60) dowels/Min.; weight 3-1/2 Lbs. -- (1,000) Dowel cap.; 9" dia. vibratory bowl feeder with: Bowl size: 9" Dia. x 4" H. -- 2-1/2 Gallon cap.; glue & water combination tank with: 8" Dia. x 12" H Tank size & single button glue flush system. -- Microprocessor control. -- (4) Casters.

ACCU-SYSTEMS - HPJ: CNC Bore, Glue & Dowel Inserter -- Specifications(2) Working zones: 24" Each; table length: 49"; CNC controlled head assembly with: Rapid (side-to-side) traverse.Head assembly with (1) Boring, gluing & dowel insertion unit: 2 HP - 3,500 RPM Drill motor; head currently setup for: 8 mm Dia. dowels.Max. dowel length: 1.57" (40 mm); Up to 1.125" (28.5 mm) material thickness with: Digital readout for height adjustment. -- Clamping System(4) Pneumatic, quick "side to side" adjustable hold-down clamps. -- Operator InterfaceNC "Color Touchscreen" Control; ALLIMAC "Advantech" for: Function & part programming and program storage; Windows based PC. Selector control for boring only or doweling; adjustable drilling speed. -- Complete with:(1) 18" Dia. vibratory feed hopper totally sealed electronically metered glue system with: 1-Button flushing; 100 PSI high power glue pump; 2-1/2-gal. glue tank.Anti-slip table surface; rack & pinion drive; centralized dust collection manifold. -- Actual model: ACCU-SYSTEMS HPJ-49NOTE: In 2023 the feed block assembly and part number J10361 was replaced. - See "Photos" link above. Once opened, the 10th "image" displays the "Purchase Order". Rails and bearings were replaced earlier.

ACCU-SYSTEMS - HPJ-7-96: CNC Bore, Glue, and Dowel Inserter -- Specifications(4) Working zones; table length of 104"; CNC controlled head assembly with: Rapid (side-to-side) traverse; assembly with: (1) Boring, gluing & insertion unit; 2 HP - 3,500 RPM drill motor; head currently set up for: 8 mm Dia. dowels.Max. dowel length: 1.562" (40 mm); up to 1.125" (28.5 mm) material thickness with: Digital readout for height adjustment. -- Clamping System(8) Pneumatic dual functioning (for horizontal & vertical drilling capability); hold-down clamps; function selector control for boring only or doweling; adjustable drilling speed. -- Operator InterfaceNC "Color Touchscreen" Control; ALLIMAC "Advantech" for: Function & part programming and program storage; Windows based PC. -- Complete with:(1) 18" Dia. vibratory feed hopper; totally sealed electronically metered glue system with: 1-Button flushing; 100 PSI high power glue pump; 2-1/2-gal. glue tank.Anti-slip table surface; rack & pinion drive; centralized dust collection manifold. -- Actual model - Accu-Systems HPJ-7-96

BENCHMARK 205-HP3 Hot Melt Adhesive ApplicatorHot Melt Adhesive Applicator with: -- Bodine adjustable speed motor. -- Bead dispensing applicator. -- Also includes an extra Bodine adjustable speed motor regulator, for fine tuned glue application.

BIESSE - ELIX B: CNC Bore, Glue, and Dowel InserterBIESSE Drill & Dowel Inserter features: Single spindle for drilling; dowel insertion unit; glue injecting unit installed on a carriage moving in the X-axis.Position for drilling dowel insertion provided through simple programs through the NC control or third-party software. Operator Control interface is: Intuitive, user-friendly, and very easy to use. -- Specifications Max. parts length: 1,300 mm (51";); Min. parts length: 120 mm (4.7";); Parts thickness: 10 - 40 mm (0.4"; to 1-1/2";). -- Positioning Speed "X" & "Y" Axis positioning speed: 40 MPM (131 FPM); "Z" Axis has manual adjustment with: Max. stroke of 40 mm (1.57").The working unit's travel on Precision machine ground ball screws; powered by brushless AC Servo motors. -- Worktable(4) Working zones with: Center fence position in up mode; (2) large work zones in down position; (4) holddown cylinders. -- Boring UnitDrilling Unit. High-speed unit with: 6,000 RPM Spindle; max. drilling depth: 30 mm (1-1/4"); max. drill bit dia.: 12 mm (0.47"); manual adjustment of depth with: Digital indicator. -- Dowel Insertion UnitDowel prepositioning ensures high repeatability of inserting dowels for each hole; distance between the dowel insertion unit and the drilling spindle: 32 mm (1.3") For simultaneous drilling; dowel insertion when holes are spaced at 32 mm; standard dowel dimensions: 8 x 30 mm; Max. dowel projection: 14 mm (0.551"). Glue Tank: Holds up to 8 liters (3.1 gallons) of glue; max. glue density: 900 CPS.Glue inserting Unit: Flow sensor & electronic adjustment of the amount of glue. -- Operator InterfaceIndustrial numerical control with: Extremely simple Program Editor; macro & parametric programming. - Icon driven. -- Includes: Original Factory Machine Documentation. -- Actual Model: BIESSE ELIX B

BIESSE POLYMAC FSE 21-Spindle Semi-Automatic Bore, Glue & Dowel InserterSpecifications: -- Spindle head fixed horizontally for end boring. -- Dowel dia. 8 - 10 mm. -- Dowel length 25 - 50 mm. -- Max. boring depth 70 mm. -- Spindle centers 32 mm (1.26").Equipped with: -- (8) Glue injectors & dowel inserters. -- Glue tank, with Pressure control & Rinsing tank for glue nozzles. -- 8-Way Vibratory bowl feeder. -- (4) Pneumatic hold-down clamps. -- (2) Side fences. -- Front support table, with Stop. -- Foot pedal control.

Max. Width: 51.2? Thickness: 0.4? – 1.6? Min. Depth: 4.7? X Axis:51.2? Head Movement Speed: 131.2 ft/min Z Axis: 1.6? Boring Unit: Rotation Speed: 6000 rpm Depth: 1.2? Max. Bits Diameter: 0.47? Modified Dowel Insertion Size: .19? to .24? Standard Dowel Insertion Unit: Standard Dowel Dim: 0.31? x 1.18? Max. Dowel Projection: 0.55? Glue System: Glue Tank Capacity: 2.1 gallons Max. Glue Density: 900 cps Equipped With: – The Smart-Shot Dowel Insertion Unit – 2 Sensors to Prevent Dowel or Glue Misfire. – Dowel Unloading System – Glue Electronic Proportioning – Glue Injector Sensor

Black Brothers 22D glue spreader Max working width 50"Max working thickness 3" 1/2 Hp, 230/460 volt three phase drive motor Table passline height 40" 7-1/4" diameter x 50-1/2" long top and bottom chrome doctor rollers 9" diameter x 50-1/2" long top and bottom rubber covered applicator rollers (Please note that the top doctor roller and top applicator roller is segmented) 11-3/4" long and 38" long top roller segments

BLACK BROTHERS 22D-875-62 Top & Bottom Glue SpreaderSpecifications: -- 62" Working width, 8-3/4" dia. Grooved Neoprene applicator roll with 24 TPI, 6-1/2" dia. smooth Neoprene doctor roll -- Lower elevator opening 0" - 4-1/2", -- Single speed of 88 FPM with 1.5 HP drive; -- NEMA 12 electrics. -- Complete with: Push button magnetic starter, safety guards, all warning labels.

Black Brothers 22-D-875-68 Top Only Glue Spreader with 68" working width, 8-3/4" dia. Smooth Neoprene applicator roller, 6-1/2" dia. neoprene doctor roll, top roll applicator only, upper elevator opening 0" - 4-1/2", REEVES variable feed drive 1.5 HP. -- Complete with: Electrical interlocks, and safety shutoff bars.

Black Brothers Top Only Glue Spreader with 56" working width capacity. -- 8 3/4" dia. Chrome applicator roll with Chrome doctor roll and flow is controlled by single hand wheel adjustment. -- 1-1/2 HP motor variable speed drive. -- Upper elevator opening 0" - 4-1/2" w/manual hand wheel adjustment. -- Includes: safety guards, electrical disconnect box and magnetic starter.

BLACK BROTHERS 22-D-650-32 Top & Bottom Adhesive Spreader; Top & Bottom Roll Glue Spreader with 32" capacity. -- 6-1/2" Rubber glue applicator rolls with 16 TPI Grooving, flow controlled by 4-1/2" Neoprene doctor rolls. -- Single speed feed drive motor - 88 FPM. -- Lower elevator opening 0" - 3-1/2". -- Complete with: Magnetic start and all guards and labels.

BLACK BROTHERS TOP and BOTTOM GLUE SPREADER with 74" working width, 8-3/4" dia. Neoprene coated application rollers and 6-1/4" dia. Neoprene coated doctor rolls. -- Upper elevator opening 0" - 4-1/2" -- 40 - 120 FPM Variable speed drive. -- Complete with: Push-button magnetic starter, safety reversing bar, safety guards and all warning labels.

BLACK BROTHERS 22-D-875-44 Top and Bottom Glue Spreader with 44" Working width.Specifications: -- 8-3/4" Dia. Neoprene coated application rolls with 16 TPI -- 6-1/2" dia. chromed steel doctor rolls. -- Upper elevator opening 0" - 4-1/2" with thickness adjustment. -- Variable feed speed, approx. 30 - 88 FPM with 1.5 HP drive, Nema 12 electronics.Complete with: -- Push button magnetic starter, safety guards, safety reversing bar for cleaning, and all warning labels.

BLACK BROTHERS 22-D-1175-80 Glue Spreader (TOP & BOTTOM)Specifications: -- 80" Working width with 11-3/4" dia. Smooth EPDM coated rolls, 8-1/2" dia. EPDM coated doctor rolls. -- Upper elevator opening 0" - 4-1/2", 2 - 3 HP Variable speed drive, target feed speed of 20 FPM; Nema-12 electrics. -- Complete with: Push button magnetic starter, safety guards, and reversing bar.LITERATURE PHOTO - Not actual equipment offered, for reference only.

BLACK BROTHERS “22-D 875-62"; TOP & BOTTOM GLUE SPREADER with 62"; working width. -- Upper elevator opening 0"; – 4";. -- 8-¾"; dia. Neoprene coated applicator rollers with 16 TPI Grooving. -- 6-½"; dia. Smooth Neoprene doctor rolls. -- 40 - 120 FPM Variable speed drive. -- Complete with: Push button magnetic starter, NEMA 12 electronics, safety guards, all warning labels.LITERATURE PHOTO - Not actual equipment offered, for reference only.

BLACK BROTHERS 22-D-875-74, Wide Format (74") Top & Bottom Glue Spreader74" Working width, 8-3/4" dia. EPDM covered applicator rolls, 6-1/4" chrome plated doctor rolls, upper elevator opening 0" - 6". -- Single speed 1.5 HP drive for 88 FPM, NEMA 12 enclosures. -- Complete with: Push button magnetic starter, safety guards, and safety reversing bar.NOTE: Very Good overall condition, but rolls will need to be recovered, and Seller has discounted price to reflect this expense.

BLACK BROTHERS TOP AND BOTTOM 775- HOT MELT Glue Spreader with 32" working width.7-3/4" Heated Adhesive applicator rolls, with flow controlled by Chrome Doctor rolls. -- Single speed feed drive motor, operating at approximately 88 FPM. -- It has a 32″ width capacity and a 5-1/2″ thickness capacity. -- The doctor rolls are in very good condition. The price listed reflects that the 2 applicator rolls need to be re-covered. Or we can have them recovered for you for an extra cost and re-install. Please contact us with your specifications as we do not recover rolls until a machine is sold as these machines are very application specific. Meaning type of material which is usually silicone or a blend and durometer.This Model 775 has been cleaned and checked, and it heats up, and runs as it should.

BLACK BROTHERS - 22-D-875-32, ...Top Only Glue Spreader.Capacity 32" Working width. -- 8-3/4" Dia. Rubber roll -- 6-1/2" Dia. chromed steel doctor roll. -- Top elevator opening w/Readout -- Constant pass line: 36-3/4" -- Outfeed roller conveyor -- 7.5 HP MotorComplete with:1 Spare rollerNOTE: Machine is currently wired for 220v

BLACK BROTHERS 22-D-875-74, Wide Format (74") Top & Bottom Glue Spreader74" Working width, 8-3/4" dia. grooved rubber covered applicator rolls, 6-1/4" chrome plated doctor rolls -- Complete with: Push button magnetic starter, safety guards, and safety reversing bar. -- Top elevator style glue spreader, constant pass line --Main Motor 1HP, 3ph --Feed speed 88FPM --Thickness adjustment via manual hand crank