Woodworking Equipment For Sale

Newman S282 Planer

Newman Planer Pineapple Infeed

Newman 282 Wood Planer 18 inch wide planning capacity by 6 inch thickness Newman 6 row Quite-cut carbide cutterhead 50 to 75 percent carbide knife life remaining 40 HP 3600 rpm top head motor-DMD 25 HP 3600 rpm bottom head motor- DMD 15 HP hydraulic pump package Feed speeds : 40 to 150 feet per minute Rubber tire feed – one row in-feed and one row out-feed. Dust hood Carbide knife grinder and jointer Cleaned and tested

Newman 4 Sided Planer

Newman 382 Helical HD DBL Surface Planer

Newman 382 Helical Head Double Surface Planer with Hydraulic Power Unit

Newman Yates A-20 4 Sided Planer

Newman EPR 18 Planer Top & Bottom Planer Manufacturer specs (to be confirmed): Newman Model ERP-18 Double-Roughing Planer 40 HP Top Head 25 HP Bottom Head 18" Wide x 6" Thick Capacity Equipped with Top & Bottom Newman Cutterheads Two 10 HP Feed Motors Variable Speed Feed from 40 - 150 FPM Air-Filled Feed Tires Free-Standing Electrical Cabinet & Operator Control

Newman HP-688 Twin Bay Hydraulic Cold Press6-Sections (top platens) each 24" x 30" each, Center posts between third and fourth platens, creating two overall areas of 30" x 74". Specifications: -- Max. fixed opening 48" with 11" cylinder stroke, each platen section has (1) 10" bore with 5" dia. ram cylinder; -- Each platen is 15/16″ thick and it’s back structure is webbed every 5-1/2″ X 7-1/2″. -- Side-mounted self-contained hydraulic system w/tank, 10 HP continuous operating pressure compensating pump. -- Hand-Valves to Cycle Individual Platens with pressure gauges for each platen. -- Idle Pop-Up Bed Rollers in the bottom platen for easy loading and unloading.Over all the press is in excellent condition, is extremely heavily built, and is also a beautiful impressive press in person.

Newman M512 Planer Matcher - 4 Main Heads - Added 2 heads - Machine was working and in use when removed from service. Seller purchased used and never installed. - Machine was running 6x8 D logs for a cabin manufacturer - Infeed rollers

Specially designed haunching machine for beaded face frames, picture frames and decorative cabinetry. This machine uses a specially designed 2-piece carbide insert adjustable cutter. -- The work piece is placed on the table and against the fence and the cutter travels in a vertical motion to achieve the precision cut. -- Any size cut width is attainable by adjusting the width of the cutter and indexing from the fence stops. -- TECHNICAL SPECIFICATIONS -- Motors: 1 @ 1.1 KW (1.5 HP), Voltage: 220/440V/3/60hz, RPM: 6,000 RPM @ 60 hz, Air: 6 Bar, -- TOOLING: Insert Carbide: Milling head 140 mm (5.5"), Height min: no min., width 1/6" (4.2 mm). Max Profile: Height 3.5" (88.9 mm), width no max. -- Machine Dimensions: L x W x H - 40" x 30" x 35". Machine Weight: 675 lbs. -- AVAILABLE OPTIONS (Call for Pricing): Tooling carbide insert head, additional set of inserts, additional flip stops, foot pedal control, left & right digital fence.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i59 NEWTON B-100 2-Spindle Air-Operated Horizontal Boring Machine Specifications: Table size 10” x 16”. Distance between spindle centers 1-5/32" - 7-1/4”. Max. boring depth 5". Max. clamping thickness 3". Horizontal table travel 5", Vertical table adjustment 3-1/2". Max. bit dia. 3/4". Spindle speed 3,600 RPM. Equipped with: 1 HP - 1,725 RPM Motor. (2) Pneumatic hold-downs. Foot pedal control.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5a NEWTON B-100 2-Spindle Air-Operated Horizontal Boring Machine Specifications: Table size 10” x 16”. Distance between spindle centers 1-5/32" - 7-1/4”. Max. boring depth 5". Max. clamping thickness 3". Horizontal table travel 5", Vertical table adjustment 3-1/2". Max. bit dia. 3/4". Spindle speed 3,600 RPM. Equipped with: 1-1/2 HP - 3,450 RPM Motor. (2) Pneumatic hold-downs. Foot pedal control.

Manufacturers Specifications Max Width of Material: 12 in 12-14” blade capacity Production Rate: 45-50 cuts per minute designed for 45 degree vertical cuts Work Tables: 60 inches to the right and left of the saw, Motors: (2) 2.5 HP (3,600 RPM). 220/60/3PH.

---Liquidation Item---Palletized & Ready to Ship with Free Loading! 5,000 CFM 15 HP Enclosureless Baghouse Dust Collector https://exfactoryauctions.com/Detail/DC-230843/event/L051624$1

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6q NORTHFIELD 12HD 12" Heavy-Duty Jointer Specifications: Max. depth of cut 5/8", Rabbeting cap. 5/8" x 12". 17” x 51-1/2” x 32-1/2” H. Outfeed table size 17” x 43” x 32-1/2” H. Equipped with: 3-1/2” Dia. 3-Knife Cutterhead. 5 HP - 1,735 RPM Motor. 52” L x 5-1/2” H Cast-iron fence, with 0° - 45° Tilt. Swing-away guard.

NORTHFIELD - #4, ...Table SawSpecifications: -- 16" Dia. saw blade cap.; 7.5 HP - 3,450 RPM motor; 1" dia. arbor; 13/16" dado cap. with: Thin collar; blade tilts: 0° - 45°; 32" rip cap. with T-type fence.

Northfield #4 Table Saw - In great working condition - Size: 4 - Serial: 62354 B - Northfield Special Heavy-Duty Motor: - Type: Arbor - HP: 7.5 - RPM: 3450 - Phase: 3 - Cycles: 60 - Code: L - Frame: J58 - Enclosure: TEFC - Winding: R & M - Serial: MS92250LV - Temp Rise: 55°C - Volts: 220 / 440 - Full Load Amps: 21 / 10.5 - Size information: - 1390 lbs. - 44" L x 36" W x 44" H - Weight & measurements are not inclusive of pallet (not shipping info) Call 800-459-2148 for more info.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i66 NORTHFIELD (AMERICAN WOODWORKING COMPANY) UNIPOINT X-36AF 16" Heavy-Duty Radial Arm Saw Specifications: Base size 29” x 46” x 35” H. Table size 27” x 57” x 36-1/2" H. Max. depth of cut 4-1/2". Max. dado cap. 1-9/16". Max. cross cut cap.: 25" with fence in rear position, 17-1/2" with fence in normal position. Max. rip cap.: 31" with fence in rear position, 23-1/2" with fence in normal position. Angle cap.: 45° Left tilt, 70° Right pivot, 45° Left pivot. Arbor dia. 1". Equipped with: 5 HP - 3,450 RPM Motor. Ram & track travel system, with Rear stop bar with (6) 7/8" Stops, Equipped for left & right compound angles. Automatic blade return device.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i67 NORTHFIELD (MONARCH) UNIPOINT 16" Heavy-Duty Radial Arm Saw Specifications: Base size 25” x 45” x 33” H. Table size 25” x 48” x 35" H. Max. depth of cut 4-1/2". Max. dado cap. 1-9/16". Max. cross cut cap.: 25" with fence in rear position, 17-1/2" with fence in normal position. Max. rip cap.: 31" with fence in rear position, 23-1/2" with fence in normal position. Angle cap.: 45° Left tilt, 70° Right pivot, 45° Left pivot. Arbor dia. 1". Equipped with: Ram & track travel system, with Rear stop bar with (6) 7/8" Stops, Equipped for left & right compound angles. Automatic blade return device.