Woodworking Equipment For Sale

RENZO BORGONOVO - BL 94-3, ... Vertical Moulding Stacker. This 3-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed linear parts onto drying racks.It eliminates manual handling of workpieces, which can mar the finish. It also increases productivity and efficiency compared to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time.Specifications: -- Workpiece Lengths are 4,900 mm (192") Max. & 1,500 mm (58") min. workpiece length, 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity - (20 - 30) pieces/Min. -- Overall Height of 2,200 mm (87"); Overall Width 2,300 mm (91"); Overall Length of 4,000 (157"). -- Work Height at Infeed 860 mm ( 34"); Racks have (11) arms that extend out approx. 39" with 4" in between arms.Operation: -- Automatically loads just-painted mouldings onto air drying rack. -- Process: As moulding exits Coater, it is moved by belt conveyor to (3) arms, which lift the piece up and over the top of the Stacker Station; coming down the other side, it places the moulding onto (3) arms. A belt conveyor transfers the piece onto the 11-tier drying cart. -- Lifting can be triggered by electric photo-eye to determine the position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front).This Stacker comes with (1) rack; additional racks are available, priced at ...$ 1,950 each

RENZO BORGONOVO MVS-2500 Automatic Sanding and Buffing MachineFOR LINEAR FRAMES AND PROFILES - Sanding and buffing of frames, rods, ledges and fitting parts of veneer, solid, raw or varnished wood, etc. (processing of 3 sides for each pass). -- Advancing speed electronically variable by inverter: 10 TO 50 M/MIN. -- Total power: kW 10,5 (14 HP) -- Compressed air: Atm 6 -- Total exhaust capacity; m3/h. 2800 (25 m/sec.) -- Working height: mm. 10 min. mm. 100 max. -- Working width: mm. 20 min. mm. 200 max. -- Working length: mm. 1200 min.DISC SANDING UNITS TYPE “SCOTCH BRITE"; (N° 4) -- Power motor: 3 HP (2.2 kW) -- Rotation speed: 1400 RPM -- Disc sanding unit holder shaft diameter: mm. 30 -- Spindle-disc sanding unit connection flange diameter: mm. 76 -- Disc sanding unit diameter: mm. 200 max. -- Disc sanding unit height: mm. 100 max. -- Dust suction hood diameter: mm. 100 -- Extraction rate: m3/h. 700 (25 m/sec.)

RENZO BORGONOVO, BL 94-2, ...Vertical Moulding Stacker.This 2-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed lineal parts onto drying racks. It eliminates the manual handling of workpieces which can mar the finish. It also increases productivity and efficiency compared to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time. -- Workpiece Length: 3,000 mm (118") Max. & 1,800 mm (72") min. workpiece width; 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity: (20 - 30) Pieces per minute. -- Overall Height: 2,200 mm (87"). - Overall width: 2,300 mm (91"). - Overall Length: 3,400 (134"). - Work Height: At Infeed 860 mm(34"). - Racks has (11) arms that extend out approx. 39" with 4" in between arms. -- Automatically loads "just painted" mouldings onto air drying rack. -- Process: As moulding exits coater, it is moved by belt conveyor to (2) arms which lift the piece up-and-over the top of the Stacker Station; coming down the other side, it places the moulding onto (2) arms, and a belt conveyor transfers the piece onto the 11-tier Drying Cart. -- Lifting can be triggered by electric photoeye to determine position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front). -- One rack included; additional racks, each ...$ 900.Machine overall dimensions: 3,400 x 2,300 x 2,200' weight: 1,200 kG.

RIGMA - RR 620 CBM, ...Roll Coater/Filling Machine w/UV Lamp2007 Taiwanese built Filling Machine is in "Like New" condition: Applicator Roll is a medium durometer rubber with a Steel Doctor Roll to set the film thickness. Following the applicator is the Reverse Pressing Roll with scraper. The machine can handle parts up to 24" wide and has the basic required adjustments. The Coater is followed by a single UV Lamp Oven with a chain link style feed belt and self-contained power source.

(2) Rigma Roll Coaters available Model RR-W4CCB 1350 Max capacity

Ritter 3 Spindle Boring Machine

(2) 3 HP Spindle Driver Motors Wired 3-Phase 240 30" X 48" Work Table Surface

This machine has been cleaned, repaired and checked over, ready for a new home! (2) 3HP motors 460V 3Ph 6 pneumatic stops for use in horizontal or vertical drilling 72" precision machined back fence 6 fence stops, 4 table stops (2) 23-spindle drilling heads, one horizontal, one vertical 3-position turret dept stop on vertical head 5 pneumatic holddowns Magnetic motor controls 32mm spindle centers 10mm collet diameter 1725 RPM spindle speed 90 PSI air requirement 3" max. drill stroke

RITTER R-30RP Raised Panel Door Shaper(3) Shaper Spindles mounted in a precision ground worktable (68" X 52" Deep X 36" Working Height ) Designed for running raised panels, as well as style & rail material for raised panel doors. -- Preset Spindle Locations, Equipped with (2) 5 H.P. Spindle Drive Motors On Right And Left Spindles, and (1) 7.5 H.P. Spindle Drive Motor At Center Spindle. -- The 1-1/4" Diameter Variable Speed Spindles are driven with Micro-V Belts. 5-1/2" max. cutter dia. -- 1st Spindle: 2" high x 12" wide max. tenon. 2nd Spindle: Setup for shaping of raised panels. 3rd Spindle: Setup for machining of style & rail and outside lip of door. -- Complete with: Micro Adjusting Fences, Miter Gage Slot at Right Hand Spindle (3/4" W X 3/8" Deep), Dust hoods (3 - 4" Connections), and Door Interlock Safety Switches.Suggested Options -- H154: PANELCRAFTER 24" Capacity Panel Jig, with 2 Cylinders. -- Jigs float on a cushion of air for smooth, easy operation. Proven design for years of trouble free use. Single thumb lever activates floating and clamping cylinders. Use with material thickness up to 2" thick. Self centering mechanism, and Variable flotation regulation. Large hand grips help operator control work piece. Change door style by simply changing the templates using a wide range of template designs and sizes. This Option requires 2 CFM at 80-100 PSI of supplied air.- R10TESA: Coping Attachment -- Fits any 3/4" by 3/8" deep slot, 2" X 12" capacity, with (3) Adjustable hold down clamps.- H161: Power Material Feeder, with reversing. -- (3) 20mm Rubber Rollers, 1HP Motor, 8 Adjustable Speeds (6,13,18,21,36,42,54,102 FPM)

36" X 72" Work table area, 24" door width & unlimited door length capacity. Capable of producing a complete raised panel detail in one (1) minute. Routers are guided by the fences or templates attached to the fences. -- Equipped with: (4) 3" Bore AC 20 clamp cylinders; (4) 1-1/2" x 1-1/2" adjustable fences; (2) 1.5 HP router motors with dust hoods; (1) 7/8 HP router with dust hood; and (1) 1475-H Heavy Duty 3-1/2 HP Hogging Router w/ cutter & dust hood. -- Complete with: 1475-A Tooling set, template guides; regulator and gauge; and (4) 2-1/2" dia. X 8' long flexible dust collection hoses.

Designed for machining of beaded face frames, cabinet doors and related joint construction. The machine miters all required corners and notches without the need to change a set-up. -- Production time is reduced to seconds with the use of the 6,500 RPM cutterhead capable of machining (2) parts at the same time. -- Standard Features: 7.5 HP spindle drive motor, 40 MM diameter 6500 RPM spindle, 7" maximum cutter head diameter, Adjustable pneumatic cutter head feed stroke, 60" stile & rail alignment fence, 16" material width capacity, (8) quick reference material fence alignment stops (6) quick reference fence offset stops, (4) hold down clamp cylinders. -- 48" wide table with 34" fixed work table height, magnetic controls, foot pedal controlled machining cycle. -- Tooling Options Sold Separately ($4,500): 7/8" Cutter head pattern, 5/16" bead carbide tipped, 1" cutter head pattern, 5/16" bead carbide tipped. Custom pattern heads upon request. -- Additional Options: 72" & 84" alignment fences, additional fence offset stops, additional fence stops. -- 4" diameter dust outlet. Weight: 1,430 lbs. -- This machine is also available with a 5 HP 220V single phase motor at the same price.

Ritter R220 Pocket Hole Borer

RITTER - R-19 F1, ...Single Row Line Borer -- Specifications:Single row 23-spindle Line Drill; 32 mm spindle centers. -- 3 HP - 3,450 RPM motor; pneumatic activation of the drill cycle; drills from the top-down. -- 12" Max. depth from spindles to back fence; 3" max. stroke of head; accepts 10 mm drill shanks. -- Equipped with:14" x 48" Table; 60" back fence with: (4) Fence stops and repetitive line pins. -- Complete with:(2) Spring loaded holddown pins; Vernier scales in "X" / "Y" for quick stop pin setup/changeover adjustments.

RITTER - R-46: Double Row Line BorerEquipped with: -- (2) 23-Spindle units; drills from the top; distance between rows 4" - 22"; both heads adjustable on rack & pinion w/digital readouts. -- 30" x 48" Table cycles up/down - 3" max. stroke; (2) 3 HP - 1,725 RPM motors; spindles gear driven. Complete with: -- 48" Back fence with: (2) Stops; (2) pneumatic holddowns per head; magnetic motor controls. -- Foot pedal operated; air requires 90 PSI; drill requirements: (24) RH & (22) LH Drill bits with 10 mm shaft & 55 mm OPL. -- Double-row Line Drill with: (23) Spindles; standard 10 mm shanks on collets.Includes: -- Boring bits: 5 mm x 57 mm. -- Included: Custom sheet metal hoods; 6" flex hose for dust collection. -- (1) Lot of set screws for bit holders.

RITTER - R-46: Double Row Line BorerEquipped with: -- (2) 23-Spindle units; drills from the top; distance between rows 4" - 22"; both heads adjustable on rack & pinion w/digital readouts. -- 30" x 48" Table cycles up/down - 3" max. stroke; (2) 3 HP - 1,725 RPM motors; spindles gear driven. Complete with: -- 48" Back fence with: (2) Stops; (2) pneumatic holddowns per head; magnetic motor controls. -- Foot pedal operated; air requires 90 PSI; drill requirements: (24) RH & (22) LH Drill bits with 10 mm shaft & 55 mm OPL. -- Double-row Line Drill with: (23) Spindles; standard 10 mm shanks on collets.

RITTER DR-3553 Profile Sander2 HP TEFC Motor with direct drive spindle which tilts 90° forward & 20° backward.Specifications: -- 400 - 1,800 RPM Inverter controlled variable speed with RPM display. -- 4" Vertical & 8" horizontal spindle adjustment. -- 36" x 33" Solid northern hard maple tabletop and 36" table height. -- 1-1/4" Dia. x 4" long spindle to accept standard sanding discs and profile discs made to customer's specifications. -- Enclosed fabricated steel base. -- Dust hood w/piano hinge for easy ascess to sanding disc. -- Stationary fence and large hand wheels for easy spindle adjustment.

High quality American made fixed spindle Shaper. -- Fabricated steel base with precision ground built-in cast iron table. -- Table insert rings to easily accommodate a wide range of cutterhead dia. -- Interchangeable spindle with lock for easy tool change. -- (8) Spindle speed settings for a variety of size cutters. -- Spindle reversing switch as standard. -- Standard 3/4" x 3/8" groove in table for miter gauge (not included). -- Large hand wheel for manual spindle height adjustment. -- Electronic digital height display. -- Micro-adjustable fence that easily adjusts for short runs. -- Large cabinet style door for easy access to motor & quill assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch. -- Integrated dust shroud & spindle guard assembly with manual holddown. -- Emergency stop. -- Operations manual, parts list & tool kit.

RITTER R-20 Double Spindle Shaper:High quality American made fixed spindle Shaper with (2) Spindles. -- Fabricated steel base with precision ground built-in cast iron table. -- Table insert rings to easily accommodate a wide range of cutterhead dia. (4-1/2" max. opening without rings). -- (2) Solid 1-1/4" spindle with lock for easy tool change. -- (2) Spindle speed settings for a variety of size cutter sizes and Spindle reversing switch. -- Standard 3/4" x 3/8" groove in table for miter gauge (not included). -- Large hand wheel for manual spindle height adjustment. -- Micro-adjustable fence that easily adjusts for short runs. -- Large cabinet style door for easy access to motor & quill assembly. -- Self-braking motor and Emergency stop. -- Magnetic starter & thermal overload switch. -- Integrated dust shroud & spindle guard assembly with manual holddown. -- Operations manual, parts list & tool kit.

ROCKWELL/DELTA 16" Radial Arm SawSpecifications: -- Blade dia. 16";. -- Base size 37" x 37 x 31"; H. -- Rip cap.: 42"; Out & 26"; In.Equipped with: -- 5 HP - 3,450 RPM Motor.

20” Rockwell Delta Shop Bandsaw. Single phase power. Good saw!