Woodworking Equipment For Sale

This entire listing is being sold as one lot. 1997 Weinig U23EL 6-Head Moulder with infeed and outfeed decks 2000 Weinig R960 profile Grinder with Weinig 970080 Opticontrol Stand TF-900 Resaw Precision 281 chop saw Precision 281 RH chop saw Shanklin F2 wrapper Damark STR 16ADD heat tunnel Ogam 280 Rip Saw

Weinig Unimat Gold - 6-Head Machine Weinig Rondamat R960 Grinder Includes: Tooling and approx (200) profiles from tool room

Weinig U22N Moulder 7 head Mid 80s Freshe rebuild

Weinig Powermat 1000 Year: 2006 Condition: very good, taken out of service in April 2024, operating at full production at that time. Several wear parts have been replaced in the last year and service by Weinig technicians. Sale includes $29,000 of new parts not yet installed. Machine information: 6-Head with HSK spindles (B,R,L,T,T,B) 12,000 RPM Capacity: 9-1/16" x 4.75" Weinig PowerCom touch screen control Feed: 62 FPM

Weinig Profimat 22 N Moulder Work ready

Weinig Profimat 23E 5 head moulder Bottom Right Left Top Bottom Complete with Weinig Rondamat 950 profile grinder. 460 volt 3-phase Clean machines from a low volume specialty shop.

WEINIG Powermat 1000 7-Head Feed Trough Moulder(B-R-L-T-T- B-U); working cap. 9-1/16" x 4-3/4". Head sequence: -- Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 40 HP , bottom 30 HP and universal 15 HP motor. All motors with electronic brakes. WEINIG Touch-Screen "Power Com" -- PowerCom Plus software system features: Profile drawing storage, profile dimensions, tool changes and production optimization. -- Electronic LED readouts for all tool holder settings, including chip breakers & pressure elements. -- Spindle #1: 1-13/16" w/Cutterhead speed of 8,000 RPM; -- PowerLock tool holders on #2 - #5 with 12,000 RPM and universal tool holder variable from 4,000 to 12,000 RPM and with high precision bearings; adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning; radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment top head; top head with independent adjustment of chip breaker & pressure element. -- Universal spindle with 270° of movement. -- Variable feed speed from 20 - 118 FPM, 7.5 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- Chromed tables and fences, (2) powered table rollers in bed and (1) between left and top spindles and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2').Equipped with: Pedestal for machine controls separate from the electrical cabinet, central location of lubrication points. -- Electromagnetic interlocking of safety hood, automatic table lubrication pump and (2) lights inside reinforced sound enclosure; phone modem..

Good Condition 230V 60Hz

1978 Weinig 7 Head Moulder S/N 2816/2248

Weinig Powermat 700 Moulder Measuring stand, tooling and spare parts as pictured Never connected to power...ready to load!

WEINIG PROFIMAT 22N Feed Through Moulder/Grinder Package Specifications: -- 5-Head (B-R-L-T-B), working width 8-5/8" x 4-3/4". -- Head sequence: Bottom 10 HP, right/ left 10 HP, top 15 HP, and bottom 10 HP motor. -- Spindle dia. of 1-1/2" with cutterhead speed of 6,000 RPM. -- Features: Mechanical digital readouts on all spindles; Digital readouts on left & top spindle. -- Feed speed variable from 18 - 78 FPM, 3 HP feed drive. (1) Powered table roller in machine bed at out feed. -- Complete with: Infeed straightening table 2 M (6'-6") and side pressure roller mounted to infeed table. -- Manual table lubrication pump, manuals sound & safety enclosure and dust collection manifold . -- Includes seventeen heads, extra feed wheels and neoprene feed wheels, as shown in Photos. -- Seller is also including the Owner's Manual.WEINIG RONDAMAT 934 Profile Grinder: -- 9" Arbor length, 11-1/2" max. tool dia., 1.5 HP motor, tilting head assembly for back relief grinding, clearance angle on peripheral of tools 10° - 30° and to each side 0° - 20°. -- Variable feed speed 1,800 - 3,000 rpm via a vari-speed gearbox, on-board wheel dressing, 9" max. wheel dia.; 0.16 HP coolant pump with built-in coolant tank. -- Includes: Operators manual, clamping nut, and pull-off bolt, 1-1/2" arbor, and an extra set of grinding wheels and toolingWEINIG OCMS measuring stand (not shown): -- With a working width of 300 mm. -- The allowable tool dimension of 3" to 11-3/4" head diameter. The measuring stand allows for electronic measuring and indicating of cutter head dimensions with electronic digital readouts; visually establishing the tool measurement, no setting errors, and no expensive CNC control. -- Magnifier screen viewer with 20:1 magnification; the cutterhead is placed in Powerlock tool post, all the operator does is view the scope and move the measuring carriage via precision dialing left to right. -- Measured values (radial) and (axial), tool dimensions both minimum and maximum are displayed. -- Includes: 1-1/2" arbor.These machines came out of a Mom and Pop shop and have been very well maintained. Both machines are in great working condition, and have no running issues.

Weinig Powermat 700 Eagle Measuring Stand, tooling and spare parts as pictured

Wemhoner Variopress

West Salem model 2420GR1-H wood grinder/hog 480 v Bottom discharge No screen - machine has breaking bars Disconnected and ready to ship

WESTERN PNEUMATICS HEAVY DUTY FINGER JOINTER WITH THE FOLLOWING EQUIPMENT & FEATURES: -- Right & Left Shaper Section: Thickness Capacity: 3/4" - 2" maximum; Width Capacity: 1-1/2" - 8" maximum; Length Capacity: 5" min. - 36" maximum; -- (2) Scoring Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Trim Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Shaper Spindles are hydraulically powered; direct driven @ 3,600 RPM by -- (1) 60 HP Hydraulic Power Unit with (1) cartridge unit per spindle. Hydraulic conversion was performed during the first year of operation. -- Western's 2-1/2" wide feed chain with lugs on 9" centers; 15 HP variable speed drive with up to 120-lug per min feed speeds; with angle transfer conveyor, air bag pressure head with quick-change feature & brush hold-downs -- APQUIP Extrusion Type Glue Applicator complete with mixing system. Currently arranged for 3/8 finger joints including (4) 3/8" glue combs -- Manual Corner Transfer to the assembly section. (allows for inspection and rejection of blocks for poor joint quality, missing proper glue spread, etc. prior to going into assembled boards) -- 12' Pre-Assembly Infeed Conveyor with feed speed ramp up/down; with side alignment rolls and dual top and bottom pre-assembly rolls -- Flying Cutoff Saw operating from below -- Assembly Press: 20' board capacity with hydraulically powered press -- Automatic Cycling Assembly Section: Feed speed varies automatically from 50 to 200 FPM, depending on incoming block lengths. Boards advance through the Cutoff Saw to a moveable limit switch where they are cut to length with a bottom-mounted 7-1/2 HP Flying Cutoff Saw arranged for continuous non-stop assembly. The cut to length board drops down into the squeeze chamber while the next board feeds out and above the preceding board where it is cut to length. Pressed lengths are pushed out onto material outfeed arms by the following board

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i61 WHIRLWIND 1000 L Upcut Saw Specifications: 2-3/16" x 8-1/4" Cap., 14" blade cap., 3,450 RPM, left-hand unit feeding from right-to-left, 5 HP BALDOR motor. Complete with: (5 - 90) Cycles/Min; magnetic starter with low voltage controls, air filter, regulator, coalescing filter, and 4" dust chute. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

WHIRLWIND - 855, ...Dual Table Oscillating Edge SanderDouble-sided with: 8" x 56" Platens size.Specifications -- 7-1/2 HP - 1,725 RPM TEFC Motor; abrasive belt size: 8" x 151"; approx. (150) oscillations/Min with 3/8" stroke. -- 11" x 55" Side table; tilts 0° - 45° with 8" vertical adjustment; tiltable end table; iron frame machine base. Complete with: -- Magnetic electrical controls w/overload protection; dust hood on drive end; all standard equipment.

Whirlwind Undercut Saw with Tiger Stop Fence

Williams 125 CJS1 Hammermill

Williams 125 HP Hammermill 230/460 3-phase