Woodworking Equipment For Sale
1689 Results Found
HOLZ-HER 1488V TRIATHLON (W/PRE-MILL & CORNER ROUNDING): -- Specifications:PC Controller which has the ability to program all functions including, thickness, edge feed, glue application, side pressure, end trimming, flush trimming, bevel/radius trimming, shaping, buffing. Virtually eliminates set-up time by selecting & loading program that automatically activates all functions simultaneously.Basic Capacity Data: Max. 1" (25 mm) solid wood banding, thin PVC, veneer, HPL & 3 mm PVC cap., 2-3/8" max. panel thickness and 7" min. panel length.Front-End Equipped With: -- Granulate Gluing System (#1907), w/flat glue-nozzle only 3° angle of approach ideal for solid wood edgebanding & "quick melt" feature. -- Automatic Edge-Magazine (1901) for coil, strip & solid wood edgebanding with TRACTOR-BELT feed system, with Heavy Duty guillotine for 4 mm PVC. -- Pressure Section (1926K MOT) with (3) large dia. rollers, each w/individual pneumatic plunge and pressure control; Programmable with servo motor positioning. Powered 1st roller with electronic speed control synchronized with chain feed speed.EDGEBANDING WORKSTATIONS: -- End Trimming Unit (#1916.1), (2) "HF" motors @ (1 HP - 2,480 RPM ea.) with "Uni-Point Swivel", quick change from flush to 0° - 15° bevel programmable from operator panel. -- Flush Trimming Unit (#1962), (2.6 HP - 200 Cy HF motors), w/servo controls, (3) motors, for compl. workstation forward/backward, vertical copy-wheels +/-. -- Fine/Bevel/Radius Trimming Unit (#1966M), w/5-axis servo motors, (1.5 HP - 200 Cy HF motors), bevels 0° - 45°, plus SIKO digital readouts. -- Scraper Unit (#1927), "Super Duty" for positively smooth finishing thick PVC for radius range from 2 - 5 mm, vertical & horizontal tracing wheels, positioning enabled through (1) servo motor function from control panel, as well as SIKO readouts for easy setup. -- Edge Shaper (#1932 MOT), w/jump control for vertical or horizontal shaping or grooving, 3.8 KW (5 HP) spindle motor, 12,000 RPM spindle speed, max. cutter dia. 135 mm (5.3"), max. cutter width 60 mm (2.36"), servo motor positioning for shaper base and SIKO digital readouts. -- Flat Glue Scraper (#1964), top & bottom for removal of potential glue squeeze-out w/air pressure nozzles to prevent shavings build-up. -- Jump Buffing Unit (#1944), w/programmable jump action for cleaning & polishing of edges (two 0.25 HP - 3,600 RPM motors), tilts 0° - 5°. -- Edge Sanding Unit (1935), vertical oscillating, belt size 120 x 2100 mm (4.75 x 82.75"), pneumatic pressure control for sanding pad, anti-dubbing device for leading & trailing edges.Equipped with and Includes: -- Microprocessor with color LCD screen, 90% of all set-ups can be adjusted from the control panel, programmable for a large variety of edges like solid lumber, veneer strips or coils, HPL, thin & thick PVC. Line control so there are no mechanical limit switches along the chain track. -- Variable feed speed from 8 - 24 MPM (26 - 67 FPM), panel overhang
$ 6,950
HOLZ-HER 1402 HF Compact EdgebanderFeatures: -- Cartridge glue system, 3 mm edge thickness cap., -- Semi-automatic feed magazine, coil stock feeds automatically with guillotine cutoff, all strip stock is fed manually with pusher bar to advance the edging. Digital glue height indicator.Workstations: -- Double motor end trim (1 HP - 10,500 RPM motor ea.) -- Universal top & bottom fine trim (1942M) for bevels from 0° - 15³; allows simultaneous bevel & profile trimming (1 HP - 18,000 RPM motor ea.; trim motors are 0.6 kW HF - 300 Cy). -- Top & bottom PVC scraper unit (1929) for 0.8 - 3 mm radius. -- Top & bottom buffing (1940), 0.3 HP - 1,620 RPM motor ea. -- Single feed speed of 35 FPM. -- Complete with: Fixed outboard panel support, frequency converter, sound enclosure, and used tooling.
HOLZ-HER CONTRIGA 1368 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) -- Specifications: NC Controlled Edgebander has the ability to program all functions including: Panel thickness, edge feed, glue application, end trimming, radius/fine trimming, corner rounding, scraping and buffing. - Virtually eliminates set-up time by selecting & loading program that automatically activates these functions simultaneously.Coil edgebanding up to 3 mm PVC cap.; 2-3/8" max. panel thickness and 7" min. panel length; powered pressure beam opening adjustments. Equipped with: --"1961" Pre-milling Station: PC Controlled with up to 45 mm (1-3/4") milling height; (2) motors @ 2 kW (2.6 HP) - 9,000 RPM each. -- Features: Granulate glue system with: Hopper System with "floating" applicator nozzle & "quick melt" feature. -- Automatic magazine for coil, strip & solid edgebanding model "1901" with: TRACTOR-BELT Feed system, Heavy-Duty guillotine for 3 mm PVC. -- "1914" Pressure Section for 12 mm thick edgebanding with: (3) Rollers, each w/individual pressure control, powered 1st roller with electronic speed control synchronized with chain feed speed; Servo motor adjustment for edgebanding thickness from PLC. Workstations: --"1819-1" Double motor (1 HP - 6,000 RPM motor ea.) end trim units with: "Uni-Point" Swivel system; "quick change" from flush to 0° - 15° bevel from operator panel. -- "1962" Top & Bottom flush trim unit: 2.6 HP - 200 Cy HF motors; 12,000 RPM cutter speed; NC Servo control, non-tilt. -- "1966" Top & Bottom fine trim unit with: Motorized 5-axis positioning; 1.5 HP - 200 Cy HF motors;, 12,000 RPM cutter-head speed; bevels 0° - 45°, Servo control; all adjustments programmable through the PLC. -- "1933 & 1934" 4-Motor corner rounding unit for top & bottom of leading & trailing corner when edgebanding all (4) sides; 0.7 HP - 200 Cy ea.; both motors with Servo positioning from control panel; Servo adjustment of entire unit (base). -- "1927" Scraper Unit: Finishing up to 5 mm thick PVC banding for radius range from 2 - 5 mm; vertical & horizontal tracing wheels, Servo positioning enabled through "PC"; Servo controlled in/out of base. -- "1964" Top & Bottom Glue scraper. -- "1851" Oscillating buffing unit: Cleaning & polishing of panel; (2) 0.25 HP - 1,440 RPM motors; tilts 0° - 45° vertically and 0° - 20° swivel on horizontal plane.Other Specifications & Features: --Variable feed speed up to 25 MPM (81 FPM); panel overhang beyond chain 35 mm (1.38"); features automatic track pad lubrication. -- Includes: PPC-231 Controller for line control, glue temperature & flow, feed speed setting, and motorized hold-down pressure beam adjustment. -- Frequency inverter, outboard panel support, and sound enclosure w/interior lights over all milling units. -- Only (6,227 hours) on the clock!
$ 4,950
HOLZ-HER - 1435-SE EDGEBANDER"1906" Cartridge Glue System; 5 mm edge thickness cap. (up to 8 mm w/optional tooling); automatic magazine coil & strips; 3 mm PVC cap. pneumatic guillotine for coil cutoff. Workstations: -- Double-motor end trim, (2) 0.3 HP - 9,000 RPM motor ea.; chamfers 0° - 10°. -- Universal top & bottom fine trim (for bevels from 0° - 15°); allows simultaneous bevel & profile trimming; (2) 0.8 HP - 18,000 RPM motor ea.; all trim motors are 0.6 kW HF - 300 Cy. -- Top & Bottom PVC scraper unit for 0.8 - 5 mm radius; air jets for blowoff. -- Top & Bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed: 35 FPM.Complete with: Built-in Operator Control Panel; outboard panel support; frequency converter; used tooling; and sound enclosure.
$ 14,750
HOLZ-HER - 1321 Sprint, ...Edgebander with: Premill & Corner Rounding Workstations - (633) Operating Hours!Specifications: -- 0.4 - 15 mm (0.02" - 0.59") Edgebanding thickness; 3 mm (0.12") max. coil thickness; 15 mm (0.59") max. strip thickness. -- 55 mm (2.17") Edgebanding height. -- 6 - 50 mm (0.24" - 1.97") Panel thickness; 60 mm (2.36") min. panel width; 180 mm (7.09") Min. panel length. -- 35-1/2" Feed chain height; 18 MPM (59 FPM) feed speed; 14" outboard support adjustment.Equipped with: -- "1961" Premilling unit with: (2) 2 kW (2-3/4 HP) - 12,000 RPM - 200 Hz Motors; Up & down cutting modes; 5 mm (0.20") Plunge travel. -- 820 mm (32.28") Dia. Coil table. -- "1903" Automatic edge magazine; for solid edges, strips, & coiled material; 40 mm (1.57") max. loading capacity. -- "1906" Cartridge type gluing application system; for EVA & PUR glue with 3-1/2 Min heat-up time; automatic recharge 4-Cartridge Magazine cap. -- Pressure section with: (1) Large driven roll & (2) small idler rolls; all rolls with pneumatic individual control via PLC. -- Microprocessor PLC Control with: 5" LCD Display, touchpad, PLC for edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, buffing; manual operation without a program. -- Sound enclosure.Workstations: -- "1918" Front & rear end trim unit with: (2) 0.35 kW (1/2 HP) - 9,000 RPM - 300 Hz Motors; 0° - 10° horizontal & vertical tilt. -- "1823" Top & bottom flush trim unit with: (2) 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motors. -- "1824" Multifunctional trim unit (flush trim/radius/chamfer) with: (2) 0.35 kW (1/2 HP) - 9,000 RPM - 300 Hz Motors; 5 mm (0.20") max. radii & flush trim; 5 mm (0.20") x 45° max. chamfer. -- "1929" Top & bottom PVC profile scrape unit with: Reversible insert carbide knives & 3 mm (0.12") max. radii. -- "1983" Single-motor profile trim (corner rounding) unit with: 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motor. -- "1964" Pneumatically controlled top & bottom glue scrape unit. -- "1944" Top & bottom buffing unit with: (2) 0.20 kW (1/4 HP) - 1,670 RPM motors & 45° swivel.Dimensions of this specific machine with outboard support extended: 252" x 63" x 70" H.
$ 6,750
HOLZ-HER 1435-SE EdgebanderCartridge glue system, 5 mm edge thickness cap. (up to 8 mm w/optional tooling), automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff.Workstations: -- Double motor end trim (2) 0.3 HP - 9,000 RPM motor ea.), chamfers 0° - 10°. -- Universal top & bottom fine trim (for bevels from 0° - 15°) allows simultaneous bevel & profile trimming, (2) 0.8 HP - 18,000 RPM motor each; all trim motors are 0.6 kW HF - 300 Cy. -- Top & bottom PVC scraper unit for 0.8 - 5 mm radius, with air jets for blowoff. -- Top & bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed 35 FPM.Complete with: -- Built-in operator control panel, outboard panel support, frequency converter, used tooling, and sound enclosure.
HOLZ-HER - 1432, ...CP/B Edgebander (Compact) -- Cartridge glue system (single cartridge system); edge thickness cap.: 0.3 to 3 mm (1/8"); max. banding height: 2"; min. panel width: 60 mm; min. length: 180 mm.Equipped with: -- Semiautomatic feed magazine; coil stock feeds automatically with guillotine cutoff; all strip stock is fed manually with pusher bar to advance the edging.Workstations: -- Single motor end trim for leading & trailing edge (trim motor recently replaced). -- Top & bottom flush/bevel trim: 1 HP - 28,000 RPM Motor ea. (recently replaced with BOSCH Trimmer motors). -- Top & Bottom buffing unit: 0.3 HP - 1,620 RPM ea. motor; equipped with: Cotton flap wheels. -- Single feed speed: 16-1/2 FPM.Complete with: -- Sound/safety enclosure; outboard panel support. - Machine is on casters.
$ 5,750
HOLZ-HER 1435-SE EDGEBANDERCartridge glue system, 5 mm edge thickness cap. (up to 8 mm w/optional tooling), automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff.Workstations: -- Double motor end trim (2) 0.3 HP - 9,000 RPM motor ea.), chamfers 0° - 10° -- Universal top & bottom fine trim (for bevels from 0° - 15°) allows simultaneous bevel & profile trimming, (2) 0.8 HP - 18,000 RPM motor each; all trim motors are 0.6 kW HF - 300 Cy. -- Top & bottom PVC scraper unit for 0.8 - 5 mm radius, with air jets for blowoff. -- Top & bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed 35 FPM. --Complete with: --Built-in operator control panel, outboard panel support, frequency converter, used tooling, and sound enclosure.
$ 7,750
HOLZ-HER -143 5-SE, ...EdgebanderCartridge glue system; 5 mm edge thickness cap.; up to 8 mm cap. w/optional tooling; automatic magazine coil & strips; 3 mm PVC cap. pneumatic guillotine for coil cutoff. Workstations: -- Double-motor end trim, (2) 0.3 HP - 9,000 RPM motor ea.; chamfers 0° - 10°. -- Universal Top & Bottom fine trim; bevels from 0° - 15°; allows simultaneous bevel & profile trimming; (2) 0.8 HP - 18,000 RPM motor each; all trim motors: 0.6 kW HF - 300 Cy. -- Top & Bottom PVC scraper unit: 0.8 - 5 mm radius; air jets for blowoff. -- Top & Bottom "jump" buffing; 0.3 HP - 1,620 RPM ea. -- Single feed speed: 35 FPM.Complete with: -- Built-in operator control panel; outboard panel support; frequency converter; used tooling; sound enclosure.
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Holz-her 1255 Panel Saw Digital Readout capacity 169” x 74” 2.36 depth of cut 3 KW motor rotates 90^
Call for Price
Year: 2008 Excellent Condition HolzHer Triathlon 1488 Edge Bander Ligmatec Return Conveyor Manual Included Description: PreMill Front & Rear Trim Saws Top & Bottom Rough Cutter Top & Bottom Combination Finish Cutter 3mm Corner Rounding Edge Scraping Edge Buffing Variable Speed 8-18 mpm 8-60mm panel thickness Electrical: 230V 3Phase
Call for Price
Call for Price
Manufacturer Specs Edging feed # 1806 Glue applicator 1906 MG Pressure unit 1912-1 end trimer 1822 Cutter unit 1825 This edgebander is located in a 2-man shop and has very low hours
Call for Price
Manufacturer Specs - Cartridge glue system, automatic magazine coil & strips (1903), 3 mm PVC capacity. - Pneumatic guillotine for coil cutoff. - Double-motor end trim (1918), chamfers 0° - 10°, includes pcs changeover system. - Universal top & bottom fine trim (1942m) for bevels from 0° - 15°; allows simultaneous bevel & profile trimming top & bottom. - PVC scraper unit (1929) with 3mm inserts. - Top & bottom buffing (1940). - Complete with PLC for easy setup & program storage. - Fixed outboard panel support. - Solid state frequency converter and sound enclosure.
Holz-her 1243 Slider Tigerstop Includes: (2) Cutting blades and scoring blades, some misc tooling
HOLZ-HER - 1619, ...Boring Machine (Construction & Line Boring) -- Specifications:(19) Spindles on 32 mm centers; bores vertically from top and horizontally from the rear; repositions via manual air shock assisted tilting.2 HP Motor with: 2,800 RPM Gear driven boring head. -- Features:4-Position turret style depth stop for boring depth and a 4-3/4" max. stroke of boring head.24-3/4" Working width; 27-1/8" max. panel width; 19-1/2"; x 38"; x 32-1/2"; H table size. -- Equipped & Complete with:RH & LH Indexing fence with flip stops; (2) indexing pins (for continuous line boring); (3) 4" dia. pneumatic holddown clamps; foot pedal actuator; magnetic push button starter. -- Actual Model is: HOLZ-HER 1619Dimensions of this specific machine with pallet: 52" x 40" x 65" H.Dimensions of this specific machine when vertical: 52" x 37" x 60" H.Dimensions of this specific machine when horizontal: 52" x 51" x 46" H.