Hogs and Wood Grinders For Sale

Vecoplan Model 45/12/2VU HZF Grinder 75 HP Motor 18" Wide opening No Vibrating Infeed conveyor

VECOPLAN RG 42-40 SINGLE SHAFT SHREDDERSpecifications; -- 40 HP MotorVecoplan ShredderModel: RG 42/40 XL PVYear: 2007Motor: 40 HP, 460V, 60HZRPM: 1465Feed Opening: 42" x 48"Blades on rotor: 27Weight: 3,700 lbs

Vecoplan RG 42/60 XL 60 HP Motor 15" Rotor 42" x 52" Hopper Opening 1" Screen This machine went through a rebuild. It was not big enough for the buyers application. Available immediately.

VECOPLAN RG52/150 SPK SINGLE SHAFT SHREDDERSpecifications: --In Feed Opening: 52″ x 58″ --Rotor Length: 52″ --Rotor Diameter: 15″ --Hopper Volume: (4) Cubic Yards --Cutters: 60 --Nip Cutters: 29 --Drive Motor: 150 HP --Rotor Speed: 125 RPM --Hydraulic Ram: 3-5 HP

VECOPLAN RG52/60 SINGLE SHAFT SHREDDER Includes Box Dumper and ConveyorsSpecifications: --In Feed Opening: 52″ x 58″ --Rotor Length: 52″ --Rotor Diameter: 15″ --Hopper Volume: (4) Cubic Yards --Cutters: 37 --Drive Motor: 60 HP --Box Dumper / Table --Infeed Conveyor --Discharge Conveyor for Gaylord Box Loading

This Grinder was recently taken out of service and was running good. No electrical controls. Ready to load.

This Grinder was recently just taken out of service. It ran very good before taken out. Does not include electrical controls.

VECOPLAN RG 70/200K Shredder with Steel Belt Conveyor & Dust CollectorSpecifications: -- Hopper Opening: 70″ x 80″ -- Hopper Volume: 4 – 6-1/2 Cubic Yards -- Main motor: 200 HP -- Rotor diameter: 20″ -- Number of cutters: 84 (triple row) -- Size of cutters: 40 mm x 60 mm -- Screen size: Holes 2″ -- Rotor speed: 145 RPM -- Rotor diameter: 20″ -- Hydraulic Feed Ram: 10 HP - 2-Speed -- Throughput: 2,000 – 28,000 Lbs/HrEquipped with: -- 10 HP Motor Dust Collector -- 48″ W kW SCHMIDT Shredder Infeed Conveyor w/ 20′ pit section

Vecoplan RG52-60 U Stretch Slow Speed Grinder 60 HP Motor No Control Panel

VECOPLAN VAZ 145/250 SINGLE SHAFT SHREDDERSpecifications; -- 575v 3 Phase --Hopper opening: 57 x 98.58 in. --Rotor width: 98.58 in. --Rotor Diameter: 14.56 in. --Rotor speed: 200 rpm --Main Drive- Electric motor with power belt drive --Gear ratio: i=5 --100 hp --Motor current: 192 A --Dimensions:- Shredder: 184"L X 141"W X 108"T- Chute: 160"L X 128"W X 76"T- Panel: 73"L X 50"W X 25"T

Vermeer HG365 Grinder New infeed roll and remote control Ready to go to work!

2013 Vermeer HG6000 -6000 hours -CAT C-18 engine -New material output belt that comes with it -Tires and lights good

Manufacturer NV300 - With bilateral linear action providing profiling and straight knife grinding up to a max of 310 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 310 mm. Max dia of cutting circle 300 mm. Includes arbor, grinding wheel, stylus, 220 volt 3-phase

WEIMA C 150 Briquette PressSpecifications & Features: -- Produces 2" (50 mm) dia. Briquettes; -- Hopper opening of 41" x 41" (1,040 x 1,040 mm); hopper volume 1.43 cu/yd (1.1 cbm). Equipped with: -- 9 HP Hydraulic motor; 0.75 HP auger motor; hydraulic oil volume of 26.4 gallons (100 liters). -- Vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material; extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio at 2,600 PSI; hourly output up to 80 - 120 Lbs/Hr ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors").Features: -- Briquette length control, chrome plated clamp, oil level switch, control panel side-mounted to hopper, and overheating protection for hydraulic oil. Solid German engineering. - Freight, start-up, discharge pipes, etc. not included.

Weima WLB 1300 Horizontal Grinder 50 HP Motor System works, not currently in use, will need main bearing replaced.

2020 Weima WLH 600 Grinder 50 HP motor Vibrating Infeed

WEIMA WLK 15 Vertical Hopper-fed Low Noise Grinder Specifications: --120 HP --15"; Shaft --82 Cutters --59"; x 59"; Hopper Opening --Hydraulic Ram

WEIMA WLK 15 Vertical Hopper-fed Low Noise Grinder Specifications: 59" x 59" Weima WLK-15 E-Rotor Shredder, 150 HP AC Motor15" Diameter RotorFilm & Fiber Rotor90 RPM Rotor Speed(63) 50MM CuttersBolt-In Cutter Holders3" Screen90" In-Feed HeightNEW Control Panel460/3/6010" Air-Veyor DischargeNew In 2007, Refurbished In 2023.NEW CUTTERSNEW CUTTER HOLDERSNEW BED KNIVESNEW BED KNIVE HOLDERSNEW RAM GUIDES - SIDES, TOP, AND BOTTOMNEW SLIP LEDGEOVER $45,000 In New WEIMA OEM Parts Installed$25,000 Spent On New Control PanelApproximate Dimensions:Shredder: 132" L x 111" W x 90" HControl Panel: 38" L x 18" W x 60" HHydraulic: 44" L x 36" W x 42" HWILL REQUIRE WIDE LOAD TRUCK

WEIMA WOODWOLF Pallet Shredder. Vertically fed machine with large 42" x 96" opening. Rotor is 24" in diameter and is driven by a 40 HP electric motor. Extra heavy design allows for effective crushing of pallets, crates, boxes and other furniture waste as a primary prep machine. The Woodwolf can be placed over the top of a single-shaft shredder, which allows the broken pieces to fall directly into the secondary shredder hopper. Offered as-is/where is as removed from service. Operated only 4-5 years per owner. High quality German design and operation.

WEIMA ZM-30 Quad Shaft 4-Shaft ShredderEquipped with: Model- ZM 30 S -- Unit was used to shred wire (6,000 – 8,000 lbs per hour) --20mm screen included 25 HP x 2 --480V- 3 phase --Cutting chamber is 19"; x 27"; Hopper is 33"; x 48"; --The ZM30S is a beefed up version of the ZM 30. Unit has the same size motors, shafts and cutters as the ZM 50 but with a shorter shaft length