Woodworking Equipment For Sale

SUPERBRUSH - 49 BRUSH SANDER -- 49" Sanding width; 11" min. part length and 4" max. thickness; 5/8" typical brush dia., 1-1/4" to 3" Typical Brush length; 3/32" per turn height adjustment; depth gauge included. -- Rubberized conveyor belt grips and pulls parts through the Sander. via 0 - 15 FPM variable speed feed system. -- 1-1/2" Dia., rubber covered; infeed & outfeed rollers provide tension to support the belt over reinforced steel conveyor bed. -- Bristle contact gauge (depth gauge) included. -- RPM Gauge displays brush speed, variable 400 - 1,200 RPM. -- Hinged dust hood with: 4" Port; 450 CFM capacity Dust collection recommended. -- Machine Design: Cast stand, zinc-plated steel bed, and centerless ground column tubes. -- Ball bearings are sealed and permanently lubricated. -- Accessories: Casters, Infeed/Outfeed tables & DRO (Digital Depth Gauge). -- Options: 7.5 HP Motor, add additional ...$1,500; 10 HP motor with electronic inverter and 10 HP motor add additional ...$ 2,500.NOTE: With Heavy-Duty locking casters. Very low usage. - No longer needed for ongoing operations. - Comes with a spare set of heavily used abrasives and backer brushes.

SUPERBRUSH 49 x 2 Double Brush Sander, (2) 10 HP Main Motors. -- "SendSmart" automatic control of the infinite-variable feed rate (0 - 15 ft./min.) for the conveyor gives a perfect finish. -- Precisely dimension stock within .010" across width of sander. -- 49" Wide sanding capacity. -- Multiple grit sanding in single pass with double drums. -- Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex". -- Self-cooling drum with abrasive Take-Up-Fastners make changing abrasive quick and easy plus keeping abrasive tightly secured to the drum. -- Sand as thick as 12" and as thin as 1/32" with a min. length of 3-1/2". -- Drum ball bearings are sealed and permanently lubricated. -- Electric height adjustment, high speed and adjustable speed. -- Cast stand, zinc-plated steel bed, centerless ground column tubes. -- Shipped assembled, some minimal assembly required. -- Includes: (2) Brushes, Caster Set . -- Dust collection mandatory, requires 1,800 CFM. -- Equipped with: PROSCALE DRO (digital read out).

Superfici Flat Line Will be removed from service by the end of January 2024. Still under power.

Superfici Finishing Line 1 x 0000 GENERAL FEATURES OF OFFER Coatings : Universal Drying results vary according to the coating. Workpiece Dimensions (Approx.): Min. - max. length: 300 mm (12") - 2440 mm (8') Min. - max. width: 25 mm (1") - 1300 mm (51", 4' nominal) Min. - max. thickness: 3 mm (1/8") - 80 mm (3-1/8") Min. - max. weight: XX kg - XX kg TO BE ADVISED MACHINE SPECIFICATIONS: Passline Height : 900 mm Operating side: RH, as viewed from inlet of line. LH available. Speeds: Mechanical speed : 2-6 m/min (6.5 - 19.5 fpm). Others available. Electrics: Sprayer is explosion proof. All other machines and all control cabinets are not explosion proof and must be placed outside any hazardous area. Voltage: 480 V / 3 Ph / 60 Hz (To be confirmed). Manufactured with UL norms components. Compressed air : 6 bars (90 PSI). See individual machine descriptions for consumption. Thermal connection - electric coils. These general features supersede the individual machine specifications in the event of any disagreement. MACHINE SPECIFICATIONS: 1 1 x 040201 AUTOMATIC SPRAYING MACHINE "COMPACT SPRAY Plus / R" With combined lacquer recovery system. Central belt conveyor in the spray area in special material, to work with lacquers and stains, and a patented combined lacquer recovery system for recovery and cleaning of the conveyor. Technical data: - Belt conveyor overall width 1700 mm - Infeed roller conveyor length 890 mm - Outfeed roller conveyor length 595 mm - Total machine length 3385 mm 1 x 040200 GENERAL DESCRIPTION The automatic through-feed spraying machine mod. "COMPACT SPRAY Plus" consists of: Infeed and outfeed driven roller conveyor system. Central belt conveyor in the spray area. The conveyor system can be in the following two options: - code 040201: with conveyor belt in special material, to work with lacquers and stains, and a patented combined lacquer recovery system for recovery and cleaning of the conveyor. The recovery system is mounted on trolley and extractable from the machine to make cleaning operations easier ; Lacquer application system consisting of a reciprocator with double arm driven by brushless motor and sliding on a high precision prismatic guide. The two arms are equipped with guns holder supporting up to max four guns each with two lacquer circuits (with possibility to install a third circuit). Based on the type of product as well as the grammage to be applied, it is possible to use three different types of guns (not included in the supply): - low pressure guns - airmix guns - airless guns Booth, in welded and painted steel framework, with glass sidewalls opening on both sides. The booth is also equipped with an inspection window on the work piece infeed side as well as an illuminated wall on the workpiece outfeed side. The pressurization system consists of two air intake blowing fans combined with a pre-filtering system, allowing easy access for inspection, as well as a filtering roof inside the

Superfici Compact Finish Line. Ovens and pumps included More info and photos coming.

SUPERFICI/VALTORTA F1SPECIFICATIONS: --Belt width - 1370 mm / 54 inches, Roller width 1500 mm / 59 inches --Working height 900 mm / 35 inches --Panel thickness 3 - 120 mm / .11" - 4.75" -- Min. panel length - 300 mm / 11.8" -- Application roller diameter - 245 mm / 9.6" -- Standard hardness of the application roller - 50Sh -- Doctor roller diameter - 175 mm / 6.8" -- Feed speed - 7 - 20 m/min / 23 - 65.5 fpm -- Compression air consumption 25 NI/min -- Approximate installed power 2kW

TAKEKAWA - RG-30S, ...Straight Line Rip SawSpecifications: -- 15 HP - 5,000 RPM Belt driven arbor, overhead arbor design. -- 1-1/4" Dia. arbor. -- 12" Dia. max. blade cap., 2-3/4" max. depth of cu.t -- 12" Min. part length. -- Throat clearance to the right of blade 26". -- Table size: 74" Long x 38" wide; 2 HP step feed drive, 33 - 66 & 131 FPM.Equipped with and Features: -- Automatic chain lubrication. -- Top pressure system with spring loaded rollers. -- Adjustable rip fence. -- Antikickback fingers. -- Push buttons and magnetic starters.

16" Blade cap., 3-3/4" max. cutting height, 5 HP - 3,600 RPM direct drive motor, arbor tilts 45ø, 44" x 40" cast iron table size, table with miter gauge slot. -- Complete with: Rack & pinion fence and large hand wheels for easy adjustments.

TANNEWITZ - XJ, ...Table SawSpecifications: -- 5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor Table Saw with a 1-piece main table; table size 42" wide x 44-1/2" deep. -- Base formed from hot rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. handwheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: Extended rack & pinion adjustable rip fence for greater ripping capacity; left- & right-hand T-slot miters. -- 16" Blade dia., 4" dado width cap.; 4" cut depth at 90°; 3" cut depth at 45°. -- Equipped with: Taper pin miter with micrometer adjustment on fence, magnetic controlled off switch, and 6" dust outlet with auxiliary rear opening for easy access. -- Power safety electrical breaker box included. Please NOTE: No blade guard.

TAYLOR 40 Section Clamp Carrier.Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pallet of spares that require repair, 32" clamps with 2-1/2" high jaws .Complete with: -- Heavy Duty Drive for rotation,& clamp tightening. -- Foot pedal control. -- Includes a glue applicator.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5k TAYLOR 8' W 6-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (36) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: "8000120" Pneumatic Panel Flattener. Pneumatic Clamp Tightener.

TAYLOR - 20-Section: Clamp Carrier Specifications -- 8-1/2' Width cap. -- 39" Max. clamp opening; 2-1/2" Jaw height. -- Approx. (4) clamps per section.Equipped with: -- (75) Clamps total. -- Pneumatic tightener. -- Pneumatic panel flattener.Complete with: -- Air drive carrier rotation. -- I-Beam chain assembly.NOTE: Already taken down.

Taylor 16 Section Clamp Carrier • 20.5' width cap., (7) clamps per section (128 clamps total).• .48" max. clamp opening clamps with 4-1/2" X 3 1/4" jaw height -- (128) Rocker plate 4" X 6" @ 80-1706 (purchase in June 2024)Complete with: -- Semi automatig clamp ttightening, -- (2) air drive carrier rotation. -- (2) Pneumatic panel flattener -- OAL apprx 24' X 14' X 12'Note: The buyer will be responsible for tear down and loadingMachine model CC 20,5-16-481

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

Tregarne Wood Welder New in Box

TERCO NORTHSTAR 10-8 Spindle Carver.8-Spindle Carver with 10" center-to-center chuck spacing. -- (2) 0.5 HP - 3,450 RPM spindle motor direct "belt drives" spindles for 11,000 RPM rotation. -- 36" Long carving cap, with optional length extensions up to 72". -- Manual rotation for round parts. -- Operator manually traces the pattern details of the master with copying stylus. -- Capable of doing both base relief (flat backed) and 360° full round carving. -- Includes: (1) Set roughing bits, (2) sets finishing bits, tools, and manual.

MLS Number 11772789 2015 Thermwood FB53-510 CNC Router Very good working condition Low hours. Used for only 1 year. Excellent condition Moving gantry, fixed table, roller hold down CNC router Designed to machine low profile sheet materials(MDF, plywood, particleboard) Uses Microsoft Windows 10 Professional operating system

Thermwood Model M90-510 5-Axis CNC Router Less then 20 hours on this system - only installed and training. Ready to be removed!

Thermwood C42 CNC Router (2) 5'x5' Tables It has 2 large routers, 4 smaller routers, and 2 aggregate heads in the turret Travainni Vacuum Pump Note from Seller: Includes two shaper heads that are not mounted into the turret and one pneumatic drill head that is not mounted into the turret. I also have one seat of Microvellum cabinetry program that I will transfer to you along with the purchase.

Table Size: 5' x 10' Spindle: 18 HP HSD Max. Spindle Speed: 18,000 RPM Number of Axis: 3 Gantry Clearance: 10.5? Z-Axis Stroke: 6? Power: 460 V, 3 Phase Approx. Shipping Weight: 12,000 Lbs. Approx. Shipping Dimensions: 7' W x 16' L x 8' H Equipped With: Roller hold down 5 position Typewriter Arm Style Tool Changer Daylight touch off sensors Equipped for Vacuum Hold Down Windows 2000 Operating System