Woodworking Equipment For Sale

DMC UNISAND K (3) Bottom and (3)Top heads wide belt sander. --, 43" max. width. - Bottom Head sequence : 1st Head Contact roll, approx.18.5 KW motor- 2nd Bottom Head Contact roll, 2rd Bottom head, Combination head with roll and platen , approx.15 KW 2-speed motor, belt speed 118 m/sec. -- Bottom panel brush. -- Top Heads: 1st Top Head: Rubber covered contact roll approx. 18.5 KW motor, 2 speed, belt speed 9/18 M/Sec. adjustable contact roll with pneumatic grit adjustment. 2nd and 3rd Top Head: Combination head with Rubber covered contact roll and polishing platen, approx. 18.5 KW HP motor, adjustable contact roll with pneumatic grit adjustment.Top panel brush. -- 44"x 103" abrasive belts with electronic tracking; computer controlled set-up functions with key pad and LCD screen. -- Vacuum Conveyor feed belt with variable feed speed from 11 - 60 FPM, approx. 7.5 KW HP feed drive, automatic conveyor belt tensioning & tracking. -- Infeed & outfeed holddown pinch rolls on all heads, motorized part thickness opening with LED readout, 1/8" - 4" max opening, automatic part thickness set-up sensor. -- Complete with: Infeed safety stop, outfeed emergency stop, motor load meters, high efficiency dust extraction and control console with monitor. -- Actual model USK1350-IM3 + USK1350

156" long x 60" wide x 80" high (3) vertical pneumatic Clamping bars (7) clamps that can be placed horizontal or vertical on perforated surface

1-3/4" Spindle dia., 7.5 HP motor, cast iron table. -- Includes: A & B 4-Speed belt driven Power Feeder with SCR feed control.

---Liquidation Item---Palletized & Ready to Ship with Free Loading! 9,000 CFM 20 HP Enclosureless Baghouse Dust Collector https://exfactoryauctions.com/Detail/DC-230838/event/L051624$1

Davis & Wells Horizontal Boring Machine Call 800-459-2148 for more info.

3/4 HP 1725 rpm motor 115/208/230 volt single phase approx. 12” x 30” table Jacobs chuck approx. 3/4” footpedal Assorted fixtures and tooling as pictured.

7.5 HP Lubricated rotary vane vacuum pump, max. 145 CFM, max.; heavy duty construction, compact design, small foot print, high tech vane material provides long life. Single-stage pump with an integrated closed loop oil recirculation system. Air cooled design with gas ballast valve and internally mounted inlet check valve. Float type oil-recovery valve ensures maximum air/oil seperation. -- High efficency multi-stage exhaust filter removes 99.9% of exhaust smoke. -- Complete with: 2-Year warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

9,7 HP Lubricated rotary vane vacuum pump, max. 229 CFM, max.; heavy duty construction, compact design, small foot print, high tech vane material provides long life. Single-stage pump with an integrated closed loop oil recirculation system. Air cooled design with gas ballast valve and internally mounted inlet check valve. Float type oil-recovery valve ensures maximum air/oil seperation. -- High efficency multi-stage exhaust filter removes 99.9% of exhaust smoke. -- Complete with: 2-Year warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

7.5 HP Oil-free (dry) rotary vane vacuum pump, max. 100 CFM, max., 26.4" Hg; heavy duty construction, compact design, small foot print, high-tech, self-lubricating graphite composite vane material provides long life and less vane replacement. Air cooled design with low noise level. -- Complete with: 2-Year warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual. -- NOTE: Inlet conn: 1.5" and discharge conn: 1.5"

10 HP VMAX oil-sealed liquid ring compact motor-mounted vacuum pump system, 150 CFM, max. 29" Hg; heavy duty construction, compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns. Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. UL/CSA EPACT compliant motor-mounted design eliminates the use of V-belts or couplings, resulting in very low maintenance and zero downtime. Air cooled design and low operating noise level. -- Complete with: Inlet filter, 3-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

DEKKER VMXO453KA1 Oil Ring/Sealed Vacuum Pump; 25 HP VMAX oil-sealed liquid ring, compact motor-mounted vacuum pump system. -- Specifications: 410 CFM rated cap. at max. 29" Hg; heavy duty construction, compact design, small foot print, patented. -- High-efficiency DX-5 separator eliminates oil carry-over concerns. Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. -- Sturdy bearing pedestal mounts to standard NEMA, C-face motor. Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. -- Continuous operation over the full vacuum range without overheating. Air cooled design and low operating noise level. -- Add ... $976 for 208 V. upgrade. -- Complete with: Inlet filter, relief valve, 3-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

DEKKER VMX0553KA1 40 HP Liquid ring vacuum pump:40 HP VMAX oil-sealed liquid ring compact motor-mounted vacuum pump system, 550 CFM, max. 29" Hg; heavy duty construction, compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns. -- Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. -- Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. -- Continuous operation over the full vacuum range without overheating. -- Air cooled design and low operating noise level. -- Complete with: Inlet filter installed, Vacuum relief valve installed, Spin-on Oil Filter , Exhaust Drip Leg, 3-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

15 HP VMAX oil-sealed liquid ring compact motor-mounted vacuum pump system, 200 CFM, max. 29" Hg; heavy duty construction, compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns. -- Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. Continuous operation over the full vacuum range without overheating. Air cooled design and low operating noise level. -- Complete with: 2-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

20 HP VMAX oil-sealed liquid ring compact motor-mounted vacuum pump system, 300 CFM, max. 29" Hg; heavy duty construction, compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns. -- Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. Continuous operation over the full vacuum range without overheating. Air cooled design and low operating noise level. -- Complete with: Inlet filter, 2-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

DELTA 11-990C 12" 5-Speed Bench-Top Drill PressSpecifications: -- Table size 8-1/2" x 8-1/2" with 15-1/2"; x 40"; x 11/16"; Thick Plywood top, Table tilt 40° Left/Right. -- Base size 8-1/4" x 8-1/4". -- Quill travel 2-3/8", Chuck capacity 1/2", JT33 Spindle taper. -- Spindle speeds 620, 1,100, 1,720, 2,340, & 3,100 RPM.Equipped with: -- 1/3 HP - 1,720 RPM Motor.Complete with: -- Portable Wood Cabinet.Dimensions with cabinet: 41" x 36" x 57" H

Delta Table Saw 5 HP 230 volt 3-phase

Manufacturer’s Specfication - Motor: - Horsepower: 3 HP - Voltage: 230V - Hertz: 60 Hz TEFC - Phase: 1-Phase - Feed Motor: - Horsepower: 1/6 HP - Phase: 1-Phase - Speeds: 1,550 RPM Drums; 3 to 20 FPM Feed Belt - Sanding Capacity: 12-1/4 in. x 25-1/2 in. - Minimum Sanding Thickness: 1/4 in. - Minimum Length of Unbutted Stock: 6 in. - Drums: 5 in. x 26 in. Aluminum - Sanding Strip Size: 5-1/8 in. x 92-1/2 in. - Dimensions (Assembled): 31 in. x 46 in. x 53 in. - Base Dimension for Mobile Base: 17-3/4 in. x 43 in. - Weight: 418 lbs.

Delta Radial Arm Saw

Delta RT 40 Invicta Table Saw, 3 phase power required, great operating condition. Phase converter available. Price Reduced! $2,150 OBO 301-501-6344

Delta 6" Jointer