Woodworking Equipment For Sale

Renzo Borgonova Rope Moulder and Splitter

These machines are in good working condition and can be inspected under power. Designed to produce a wide range of spiralled wood roping in a continuous length. Square stock is fed into the machine to produce twisting rope. Manufacturer specs (to be confirmed): - Type L.C.B. 600 - .75 kW feed motor - 1.5 kW drawing unit - 1.5 kW right cutter motor - 1.5 kW left cutter motor - Workpiece diameter: min 8 mm, max 60 mm - Workpiece length: infinite - Feed speed: 15-80 RPM - Spindle diameter: 18 mm - Includes (1) cutter on drawing unit used for rope moulding - 3-4" dust ports - Splitter machine to cut dowels in two - (4) different diameter cutters and dies

RENZO BORGONOVO - SP 6P, ...6-Gun Spray Machine with 3/4" - 12" width cap.3-1/4" Max, part thickness and 32" min. part length. Standard specifications: -- (6) Gun mounts made from aluminum rods and HDPE mounting brackets, for connections for (6) HVLP automatic spray guns, and (1) dual diaphragm fluid pump. (Guns and Pumps are not included). -- Complete with: Teflon coated recovery cabinet for each spray station and easy rollout feature, front access door with large viewing window & gas shock support arms. -- (2) Paint circuits with (3) spray guns each (guns not included).Features: -- Machine is operated with a central control panel and gun timing is controlled by a PLC that times the spray guns in relation to the length of the work piece and feed speed. -- PLC Records the number of workpieces and total linear feet processed in session. -- The machine is set up with infeed & outfeed conveyors that operate at any speed between 60 and 300 FPM and is made up of Antistatic and Antisolvent belts and intermediate steel rollers between Spray Stations. -- 11.8" Dia., 1.5 HP exhaust fan rated at 4,000 cbm/Hr. -- This Sprayer integrates easily into any line whether as a primary unit or as an intermediate step. -- Overall length is just under 10'.The Machine is priced with no guns or supply installed, these will need to be added by the buyer or a separate quote can be requested for guns and supply pumps.Working dimensions: -- Length: Min. 800 mm / max. infinite. -- Width: Min. 15 / 300 mm. -- Height: Min. 15 mm / max. 100 mm. -- Height of worktable: 900 mm. -- Compressed air consumption - NI/min 1,500 – 2,000. Optional: &#9679 InHand Networks Industrial Router &#9679 Overall machine dimensions and weight &#9679 Teleservice module for remote troubleshootingPrice includes the following options: &#9679 Stainless Steel carriage &#9679 Teleservice module for remote service.PRICE IS FOB EAST COAST PORT, INLAND FREIGHT WILL BE QUOTED.Overall size: 3,000 x 2,900 x 2,220 mm and 800 kG (I,750 Lbs).

RENZO BORGONO 800/I Hot Embosser. Machine is designed to "hot engrave" decorations onto picture frames, furniture accessories and mouldings. Heats the pattern wheel and presses it into wood transferring the design onto the product. -- Max. 450 mm(7.7") Engraving width cap.; 700 mm (27.5") material width cap., MIn: 100 mmm (3.94") width; 80 mm (3-1") dia. arbor; 140 mm (5.5") min. and 440 mm (17.3") max. embossing roller dia.; 3 mm (1/8") max. embossing depth with base-relief rollers and 7 mm (0.27)") max. depth with cutting edge rollers. -- 1.5 HP (1.1KW) Top drive gearmotor, feed speed 5.5 - 26 FPM output. -- Approx 8 KW heating by electric lamps, with thermal probe/thermostat. -- Water cooled shaft to avoid flexing and hear propagation. Coolant circulation pump 0.12 HP. -- Overall Dimensions: 1200 mm x 1400 mm x 17 mm height (48" x 55.5 x 71" H), Net weight: 950 Kg/2100 Lbs..

RENZO BORGONOVO - BL 94-3, ... Vertical Moulding Stacker. This 3-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed linear parts onto drying racks.It eliminates manual handling of workpieces, which can mar the finish. It also increases productivity and efficiency compared to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time.Specifications: -- Workpiece Lengths are 4,900 mm (192") Max. & 1,500 mm (58") min. workpiece length, 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity - (20 - 30) pieces/Min. -- Overall Height of 2,200 mm (87"); Overall Width 2,300 mm (91"); Overall Length of 4,000 (157"). -- Work Height at Infeed 860 mm ( 34"); Racks have (11) arms that extend out approx. 39" with 4" in between arms.Operation: -- Automatically loads just-painted mouldings onto air drying rack. -- Process: As moulding exits Coater, it is moved by belt conveyor to (3) arms, which lift the piece up and over the top of the Stacker Station; coming down the other side, it places the moulding onto (3) arms. A belt conveyor transfers the piece onto the 11-tier drying cart. -- Lifting can be triggered by electric photo-eye to determine the position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front).This Stacker comes with (1) rack; additional racks are available, priced at ...$ 1,950 each

RENZO BORGONOVO MVS-2500 Automatic Sanding and Buffing MachineFOR LINEAR FRAMES AND PROFILES - Sanding and buffing of frames, rods, ledges and fitting parts of veneer, solid, raw or varnished wood, etc. (processing of 3 sides for each pass). -- Advancing speed electronically variable by inverter: 10 TO 50 M/MIN. -- Total power: kW 10,5 (14 HP) -- Compressed air: Atm 6 -- Total exhaust capacity; m3/h. 2800 (25 m/sec.) -- Working height: mm. 10 min. mm. 100 max. -- Working width: mm. 20 min. mm. 200 max. -- Working length: mm. 1200 min.DISC SANDING UNITS TYPE “SCOTCH BRITE"; (N° 4) -- Power motor: 3 HP (2.2 kW) -- Rotation speed: 1400 RPM -- Disc sanding unit holder shaft diameter: mm. 30 -- Spindle-disc sanding unit connection flange diameter: mm. 76 -- Disc sanding unit diameter: mm. 200 max. -- Disc sanding unit height: mm. 100 max. -- Dust suction hood diameter: mm. 100 -- Extraction rate: m3/h. 700 (25 m/sec.)

RENZO BORGONOVO, BL 94-2, ...Vertical Moulding Stacker.This 2-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed lineal parts onto drying racks. It eliminates the manual handling of workpieces which can mar the finish. It also increases productivity and efficiency compared to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time. -- Workpiece Length: 3,000 mm (118") Max. & 1,800 mm (72") min. workpiece width; 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity: (20 - 30) Pieces per minute. -- Overall Height: 2,200 mm (87"). - Overall width: 2,300 mm (91"). - Overall Length: 3,400 (134"). - Work Height: At Infeed 860 mm(34"). - Racks has (11) arms that extend out approx. 39" with 4" in between arms. -- Automatically loads "just painted" mouldings onto air drying rack. -- Process: As moulding exits coater, it is moved by belt conveyor to (2) arms which lift the piece up-and-over the top of the Stacker Station; coming down the other side, it places the moulding onto (2) arms, and a belt conveyor transfers the piece onto the 11-tier Drying Cart. -- Lifting can be triggered by electric photoeye to determine position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front). -- One rack included; additional racks, each ...$ 900.Machine overall dimensions: 3,400 x 2,300 x 2,200' weight: 1,200 kG.

RIGMA - RR 620 CBM, ...Roll Coater/Filling Machine w/UV Lamp2007 Taiwanese built Filling Machine is in "Like New" condition: Applicator Roll is a medium durometer rubber with a Steel Doctor Roll to set the film thickness. Following the applicator is the Reverse Pressing Roll with scraper. The machine can handle parts up to 24" wide and has the basic required adjustments. The Coater is followed by a single UV Lamp Oven with a chain link style feed belt and self-contained power source.

(2) Rigma Roll Coaters available Model RR-W4CCB 1350 Max capacity

Ritter 3 Spindle Boring Machine

(2) 3 HP Spindle Driver Motors Wired 3-Phase 240 30" X 48" Work Table Surface

This machine has been cleaned, repaired and checked over, ready for a new home! (2) 3HP motors 460V 3Ph 6 pneumatic stops for use in horizontal or vertical drilling 72" precision machined back fence 6 fence stops, 4 table stops (2) 23-spindle drilling heads, one horizontal, one vertical 3-position turret dept stop on vertical head 5 pneumatic holddowns Magnetic motor controls 32mm spindle centers 10mm collet diameter 1725 RPM spindle speed 90 PSI air requirement 3" max. drill stroke

RITTER R-30RP Raised Panel Door Shaper(3) Shaper Spindles mounted in a precision ground worktable (68" X 52" Deep X 36" Working Height ) Designed for running raised panels, as well as style & rail material for raised panel doors. -- Preset Spindle Locations, Equipped with (2) 5 H.P. Spindle Drive Motors On Right And Left Spindles, and (1) 7.5 H.P. Spindle Drive Motor At Center Spindle. -- The 1-1/4" Diameter Variable Speed Spindles are driven with Micro-V Belts. 5-1/2" max. cutter dia. -- 1st Spindle: 2" high x 12" wide max. tenon. 2nd Spindle: Setup for shaping of raised panels. 3rd Spindle: Setup for machining of style & rail and outside lip of door. -- Complete with: Micro Adjusting Fences, Miter Gage Slot at Right Hand Spindle (3/4" W X 3/8" Deep), Dust hoods (3 - 4" Connections), and Door Interlock Safety Switches.Suggested Options -- H154: PANELCRAFTER 24" Capacity Panel Jig, with 2 Cylinders. -- Jigs float on a cushion of air for smooth, easy operation. Proven design for years of trouble free use. Single thumb lever activates floating and clamping cylinders. Use with material thickness up to 2" thick. Self centering mechanism, and Variable flotation regulation. Large hand grips help operator control work piece. Change door style by simply changing the templates using a wide range of template designs and sizes. This Option requires 2 CFM at 80-100 PSI of supplied air.- R10TESA: Coping Attachment -- Fits any 3/4" by 3/8" deep slot, 2" X 12" capacity, with (3) Adjustable hold down clamps.- H161: Power Material Feeder, with reversing. -- (3) 20mm Rubber Rollers, 1HP Motor, 8 Adjustable Speeds (6,13,18,21,36,42,54,102 FPM)

36" X 72" Work table area, 24" door width & unlimited door length capacity. Capable of producing a complete raised panel detail in one (1) minute. Routers are guided by the fences or templates attached to the fences. -- Equipped with: (4) 3" Bore AC 20 clamp cylinders; (4) 1-1/2" x 1-1/2" adjustable fences; (2) 1.5 HP router motors with dust hoods; (1) 7/8 HP router with dust hood; and (1) 1475-H Heavy Duty 3-1/2 HP Hogging Router w/ cutter & dust hood. -- Complete with: 1475-A Tooling set, template guides; regulator and gauge; and (4) 2-1/2" dia. X 8' long flexible dust collection hoses.

Designed for machining of beaded face frames, cabinet doors and related joint construction. The machine miters all required corners and notches without the need to change a set-up. -- Production time is reduced to seconds with the use of the 6,500 RPM cutterhead capable of machining (2) parts at the same time. -- Standard Features: 7.5 HP spindle drive motor, 40 MM diameter 6500 RPM spindle, 7" maximum cutter head diameter, Adjustable pneumatic cutter head feed stroke, 60" stile & rail alignment fence, 16" material width capacity, (8) quick reference material fence alignment stops (6) quick reference fence offset stops, (4) hold down clamp cylinders. -- 48" wide table with 34" fixed work table height, magnetic controls, foot pedal controlled machining cycle. -- Tooling Options Sold Separately ($4,500): 7/8" Cutter head pattern, 5/16" bead carbide tipped, 1" cutter head pattern, 5/16" bead carbide tipped. Custom pattern heads upon request. -- Additional Options: 72" & 84" alignment fences, additional fence offset stops, additional fence stops. -- 4" diameter dust outlet. Weight: 1,430 lbs. -- This machine is also available with a 5 HP 220V single phase motor at the same price.

Ritter R220 Pocket Hole Borer

RITTER - R-19 F1, ...Single Row Line Borer -- Specifications:Single row 23-spindle Line Drill; 32 mm spindle centers. -- 3 HP - 3,450 RPM motor; pneumatic activation of the drill cycle; drills from the top-down. -- 12" Max. depth from spindles to back fence; 3" max. stroke of head; accepts 10 mm drill shanks. -- Equipped with:14" x 48" Table; 60" back fence with: (4) Fence stops and repetitive line pins. -- Complete with:(2) Spring loaded holddown pins; Vernier scales in "X" / "Y" for quick stop pin setup/changeover adjustments.

RITTER - R-46: Double Row Line BorerEquipped with: -- (2) 23-Spindle units; drills from the top; distance between rows 4" - 22"; both heads adjustable on rack & pinion w/digital readouts. -- 30" x 48" Table cycles up/down - 3" max. stroke; (2) 3 HP - 1,725 RPM motors; spindles gear driven. Complete with: -- 48" Back fence with: (2) Stops; (2) pneumatic holddowns per head; magnetic motor controls. -- Foot pedal operated; air requires 90 PSI; drill requirements: (24) RH & (22) LH Drill bits with 10 mm shaft & 55 mm OPL. -- Double-row Line Drill with: (23) Spindles; standard 10 mm shanks on collets.Includes: -- Boring bits: 5 mm x 57 mm. -- Included: Custom sheet metal hoods; 6" flex hose for dust collection. -- (1) Lot of set screws for bit holders.

RITTER - R-46: Double Row Line BorerEquipped with: -- (2) 23-Spindle units; drills from the top; distance between rows 4" - 22"; both heads adjustable on rack & pinion w/digital readouts. -- 30" x 48" Table cycles up/down - 3" max. stroke; (2) 3 HP - 1,725 RPM motors; spindles gear driven. Complete with: -- 48" Back fence with: (2) Stops; (2) pneumatic holddowns per head; magnetic motor controls. -- Foot pedal operated; air requires 90 PSI; drill requirements: (24) RH & (22) LH Drill bits with 10 mm shaft & 55 mm OPL. -- Double-row Line Drill with: (23) Spindles; standard 10 mm shanks on collets.

High quality American made fixed spindle Shaper. -- Fabricated steel base with precision ground built-in cast iron table. -- Table insert rings to easily accommodate a wide range of cutterhead dia. -- Interchangeable spindle with lock for easy tool change. -- (8) Spindle speed settings for a variety of size cutters. -- Spindle reversing switch as standard. -- Standard 3/4" x 3/8" groove in table for miter gauge (not included). -- Large hand wheel for manual spindle height adjustment. -- Electronic digital height display. -- Micro-adjustable fence that easily adjusts for short runs. -- Large cabinet style door for easy access to motor & quill assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch. -- Integrated dust shroud & spindle guard assembly with manual holddown. -- Emergency stop. -- Operations manual, parts list & tool kit.