Lathes and Carvers For Sale

CALPE TH5-1600 Heavy-Duty High-Production, Fully Automatic CNC Lathe: General Description: -- Multi-Spindle cutting simultaneously, (5) spindles using V-type gouge knives. -- 63" (1,600 mm) Max. distance between centers; 5-1/2" (140 mm) max. swing diameter between spindles. -- CNC Controlled with 2.95" (75 mm) travel for depth of cut. Motors/Speeds: -- Servo controlled CNC drives: -- CNC controlled electronic variable speed head drives the movement of the (5) gouge tools. -- CNC controlled feed speed carriage, variable up to 50 FPM (15 MPM). -- (1) Head stock variable speed drive for the (5) spindles, up to 6,000 RPM, approx 10 HP. -- Fast return travel of up to 590 IPM (15,000 mm/Min). 2 HP approx hydraulic drive -- Loading device & tail stock powered by hydraulic pump with 2 HP - 1,750 RPM motor; No. 5 Morse taper on main spindle shaft. Features: -- Automatic loading & unloading device; carriage mounted with linear guides providing high precision movement. -- Full CNC controller with on-screen CAD programming for all products.Matching CALPE L6-1600, record number LC-010996 spindle sander is available at additional cost at same facility.

CALPE L6-1600 Spindle Sander with Hopper Feed. -- (6) Spindles, semi-automatic sanding machine; distance between centers 63", 6-3/16" max sanding diameter, capable of sanding 1800 spindles per hour. -- 4 HP - 1,800 RPM head motor, (5) sandpaper holders, each for different grits, 4000-3200-2200-850 RPM head spindle speeds. Copier unit that follows all contours. -- Oscillating sanding units & stationary pick up of part. -- NOTE: This sander was running with lathe on our record number LC-01811 and owner prefers to sell at the same time.

CANTEK - GOODSPEED CP-1250 AP Hydraulic Copy Lathe. -- General Data: 44" Length cap. with 4" min. length of stock and 1/2" - 4" max. diameter cap., hopper feed with automatic chucking, square or round stock can be hopper fed. -- Equipped with: 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change, 3 HP hydraulic motor. -- Complete with: Swivel control panel, PLC sequence controller built into separate control cabinet, (3) pressure gauges, automatic way & support collar lubrication & safety wire mesh across the front of machine. -- Includes: Two hydraulic copiers (rough + fine). Travelling steady rest and installed knives. -- Production capacity: Approx. (5 - 7) pieces/Min for 600 mm length, (3 - 5) pcs./Min for 900 mm length, (2 - 3) pcs./Min for 1,200 mm length, depending on cutting speed, type of material, etc. -- Electrical load: 11.4 amps, 10.5 HP @ 575/3/60.volts.

CENTAURO T5E -1600 Semi-Automatic Hydraulic Copy Lathe with (2) Copiers and Tool Sharpener. -- General data: 63" (1600 mm) Max. between centers and 8-5/16" height of center over the bed, 5.5 HP main motor with saddle advance using a lead screw with precision recirculating balls for max. accuracy.Automatic work cycle sequencing with electronic control capable of up to (5) different programmable cycles. -- Drives/Controller: Programmable saddle with variable feed speed; 900 - 1,500 - 1,800 - 2,250 - 3,000 & 4,500 RPM spindle speeds; 1.5 HP hydraulic variable speed carriage, 0 - 39-1/2 FPM, carriage return speed 39-1/2 FPM. CENTAURO "EM-12" Programmable Controller. -- Equipped with: (2) Hydraulic tracing units and revolving steady rests; 3-1/2" max. square part size with revolving steady rest, 5" max. with copying unit, 5.8" stroke of copying unit. 19-5/8" max. length for manual turning. -- Includes: Drive center with interchangeable jaws, revolving tailstock center with 12 mm dia. tip, (2) dust extraction hoods, and automatic double pass system for finishing center. -- Comes with: Centauro AG-125 knife grinder with diamond wheel and Transformer for 600/220-240V. - Machine manual included.NOTE: ...Was used for Baseball Bats.

CENTAURO TC-1200 Copy Lathe;47-1/4" Max. between centers. -- 4-3/4" Height of centers over bed. -- Max. copy dia. 6" (4-1/8"). -- Max. dia. permitted by traveling steady 3-1/2" (2-1/2"). -- 4 HP main motor, 900 - 1,500 - 2,200 & 3,540 RPM spindle speeds. -- 1 HP hydraulic variable speed carriage with tool post and revolving steady rest. -- (2) Independent gouges working in conjunction with the traveling steady rest. -- Variable speed hydraulic saddle movement. Standard Equipment & Specs: -- Drive center with (2) interchangeable heads 1" and 1-3/4". -- Tailstock revolving center 1/2". -- Traveling steady rest max. 3-1/2" (square 2-1/2" x 2-1/2") with reduction bushing. -- (2) Vertical Tantung gouges, radius 1.2 mm and (1) precutting tool. -- Work-piece centering device. -- Tool support rest for hand turning. -- (2) Dust extraction ports 4" dia. -- Motor protection switch. -- Emergency push button. -- Front sliding safety guard. -- Standard: Service tool kit and Abrasive stone for cutting edge dressing.

CENTAURO T5E -1600 Semi-Automatic Hydraulic Copy Lathe with two copier heads. -- General data: 63" (1600 mm) Max. between centers and 8-5/16" height of center over the bed, 5.5 HP main motor with saddle advance using a lead screw with precision recirculating balls for max. accuracy.Automatic work cycle sequencing with electronic control capable of up to (5) different programmable cycles. -- Drives/Controller: Programmable saddle with variable feed speed; 900 - 1,500 - 1,800 - 2,250 - 3,000 & 4,500 RPM spindle speeds; 1.5 HP hydraulic variable speed carriage, 0 - 39-1/2 FPM, carriage return speed 39-1/2 FPM. CENTAURO "EM-12" Programmable Controller. -- Equipped with: (2) Hydraulic tracing units and revolving steady rest attachment; 3-1/2" max. square part size with revolving steady rest, 5" dia. max. with copying unit, 5.8" stroke of copying unit. 19-5/8" max. length for manual turning. -- 9.8" (250mm) Max copy dia., 6.8" (175 mm) Max. square section without steady rest.. -- Includes: Drive center, revolving tailstock center with 12 mm dia. tip, and automatic double pass system for finishing center. -- Note this machine has no top Back Knife for plunging with form tool. -- Machine manual included.

CENTAURO T5-1600 Hydraulic Copy Lathe with two back knives; Specifications: -- 63" (1,600 mm) Max. between centers, 4/5.5 HP main motor, two speed selector switch, 900 - 1,500 - 1,800 - 2,250 - 3,000 and 4,500 RPM spindle speeds. -- 1 HP Hydraulic power pack for variable speed carriage 0 - 19 FPM carriage; return speed 24 FPM, hydraulic tailstock with Pressure Reducing Valve (PRV) for fine control of pressure, especially helpful for small and/or slender turnings. Equipped with: -- (2) Independent copying units, (1) for roughing and (1) for finish cutting. 1st, 2nd pass & auto feature with 2nd pass active it will cut the pattern 2 times automatically and sequence the tools between cuts. -- Revolving steady rest, max. dia. 140/100 mm square ( 5.5"/3.9"), and for max. dia. 90/65 mm max. square billet size. -- 9.8" (250mm) Max copy dia., 6.8" (175 mm) Max. square section without steady rest.. Includes: -- (2) Back slides manually operated with knives for making dowel ends; 45/26 mm drive center for headstock and 12 mm center for tailstock, (2) V-type gouges with 0.6 & 3.5 mm cut radii.NOTE: Ex-Factory handles import/export to just about any country in the world.

CENTAURO T5E -1600 Semi-Automatic Hydraulic Copy Lathe with two copier heads. -- General data: 63" (1600 mm) Max. between centers and 8-5/16" height of center over the bed, 5.5 HP main motor with saddle advance using a lead screw with precision recirculating balls for max. accuracy.Automatic work cycle sequencing with electronic control capable of up to (5) different programmable cycles. -- Drives/Controller: Programmable saddle with variable feed speed; 900 - 1,500 - 1,800 - 2,250 - 3,000 & 4,500 RPM spindle speeds; 1.5 HP hydraulic variable speed carriage, 0 - 39-1/2 FPM, carriage return speed 39-1/2 FPM. CENTAURO "EM-12" Programmable Controller. -- Equipped with: (2) Hydraulic tracing units and attachment for revolving steady rest; 3-1/2" max. square part size with revolving steady rest, 5" max. with copying unit, 5.8" stroke of copying unit. 19-5/8" max. length for manual turning. 9.8" (250mm) Max copy dia., 6.8" (175 mm) Max. square section without steady rest.. -- Includes: Drive center with, revolving tailstock center with 12 mm dia. tip, and automatic double pass system for finishing center. -- Note this machine has no top Back Knife for plunging with form tool.

ELIO VALERI ELVAP 120 Copy Lathe. -- General data: 48" max. length cap., 7" max. dia. without steady rest, 3.93" max. dia. with steady rest, and up to 2.5" x 2.5" dia. with steady rest for square pieces; 0 - 39 FPM forward and 0 - 52 FPM return speed, 5.5 HP motor, 1,300 - 3,500 - 5,000 RPM; -- Features: Air/oil feed and copier, chain head stock drive, gate loading, pattern; pneumatic tail stock, automatic pneumatic control program.

INTOREX TXA-1200 Automatic Hydraulic Copy Lathe;Specifications: -- 1,200 mm (47-1/4") Max. turning length, 210 mm (8-1/4") max. turning diameter. -- Max. turning dia. with standard steady 90 mm (3.5"). -- (2) Hydraulic copiers. -- Max. size of square stock for turning with automatic feed 100 mm (3.9"). -- (3) Tool holder turrets. Hopper feed unit. -- (8) Head speeds in a range from 750 - 5,500 RPM. -- 6 HP or 7.5 HP Headstock spindle motor. -- 4 HP Hydraulic pump motor.

Approximately 27" width capacity 1/2" - 3.9" diameter capacity 10 HP spindle motor 1800-3200 spindle speed 3 HP hydraulic feed PLC sequence controller

3" - 41" length capacity 1" - 3" square or round diameter capacity 15 HP spindle motor Spindle speeds 2250, 3200, 3525, 4625 rpm hopper feed

INTOREX CX-1600 Automatic Hydraulic Copy Lathe with Hopper Feed. Specifications: -- Size Capacity: 74.8" (1,900 mm) Max. between centers; fully automatic hopper feeding (hopper auto adjust to change of size) up to 5.51" (140 mm) sq. parts; semi-automatic loading up to 9.45" round part diameter. In semi-auto (without hopper feed) will turn up to 74.8" (1,900 mm) . -- Drives/Speed: 12 HP approx. main motor with variable speed inverter; Servo-controlled carriage drive allows a forward speed of 0 - 130 FPM carriage; slides over a linear ball-bearing assembly and tempered guide-way; 3 HP hydraulic pump motor giving precise & positive movement to the copy knives. -- Tool-Heads: Copying system with (3) Hydraulic turning tool-heads: 1st fixed or variable Rounding knife, 2nd rough cutting copier knife, 3rd fine detail copier knife; (4) vertical back knives for cutting using form tools and dowel ends. -- Controller: Separate PLC console for up to (200) work cycles for different profile parts; programmable logic control (PLC) with self-programming to set up and modify settings that are stored in memory and recalled for each different job. -- Includes: Input screen to control programs; Front sliding safety barrier; Selection of tools and accessories.

INTOREX TMK-5000 ...(8) Axes CNC Lathe/Machining Center with ATC.The ultimate combination of Lathe//CNC Machining Center that can machine any turning, symmetrical or asymmetrical as well as any component that a CNC router can do...all in one machine. Features: -- Special CNC machining center to turn, sand and mill wooden columns for log houses, architectural posts, etc.. Constructed with a heavy-duty cast iron frame which guarantees a stable solid base, and assures high precision and quality finishing. -- Length capacity is about 5,000 mm (16'- 4"). Diameter Capacity: TBA. -- (8) CNC axes with simultaneous interpolation on (5) axes. Axes Configuration: -- X-axis controls the position of the saddle/carriage; 'Z & X' control the position of the router spindle; -- A-axis CNC controls the headstock rotation; -- 'B' is the water-cooled CNC Router Spindle with variable speed of 0 - 24, 000 RPM; -- 'Y2' Circular saw for hogging/turning; 'Y3' Shaping unit with milling cutter block 124 mm dia. x 390 mm long (4.9" dia. by 15.3" long); -- 'Y4' axis combination shaped turning or narrow belt sander. Also equipped with: -- (2) End boring units to pre-drill holes at ends of turnings. These holes are for supporting the headstock and tailstock for rotation of the turning component. -- (1) Hydraulic unit for automatic centering of the component between headstock and tailstock. Note: Versatility of CNC Router and Lathe in one single machine.

INTOREX TX-1600 Hydraulic Copy Lathe Hopper Feed. Overall Specs: -- Full automatic, equipped with (2) hydraulic copiers, (2) tool holder units, (2) back knives, Hopper Feed, Automatic Loading System. and electronic PLC control. Carriage runs on ball screw and tempered/ground guides. -- 1,600 mm (63") Max. between centers; hopper loading capacity of 140 x 140 mm (5.5" sq.) in automatic cycle and 210 mm (8.3") diameter in semi-automatice cycle. -- 10 HP Main motor with a variable speed of 730 - 5100 RPM; 3 HP hydraulic power pack. _ Fitted with PLC programmed logic to assist in setup; All working units (advance carriage, tailstock, tool holder units, etc) are hydraulically powered with independently adjustable speeds. -- Copying system with (2) hydraulic copier knives and traveling steady rest; includes a pre-rounding knife in front of steady; hydraulically powered back knives for doweling or plugging with form tools. -- Includes: Tooling, front safety guard; front mounted electrical panel with easy access to all pushbuttons and controls, and LED RPM display.

--INTOREX TKC1500DS 5-Axes CNC Lathe/Machining Center with custom features. With (5) interpolated axes; Automatic front load hopper; Saw Blade for turned sections; Sanding head. With sanding it can produce finished components. Can produce either turned or shaped furniture and joinery parts such as newel posts, stair spindles with modern contemporary design, chair, table and sofa legs -- Features: Independent router head with (6) position rotary tool changer for additional milling, shaping or drilling, .Upon completion components are ejected onto a transfer belt. -- Axes Configurations - A: Headstock Rotating spindle drive. - B: Router head drive.. - X: Horizontal Drive. - Y: Transverse Drive. - Z: Vertical Drive. -- Tools Configured: -Y2 Unit: Saw blade (turning). - Y5 Unit: Narrow Sanding Belt (turned). - Y1 Unit: Router Head. w/6-position tool changer. - Y4 Unit: Flat Belt Sanding unit. -- Size Specifications: Max length- 1500 mm (59.1"): Max dia.- 230 mm (9.1"); Max automatic feeding - 120 mm square (4.7"); Max Manual feeding -160 mm square (6.3"); -- Other Technical Specs. Axes Strokes: X/axis - 2400 mm (94.5"); Y/axis - 350 mm (13.8"); Z/axis - 650 mm (25.6"); A/axis - Infinite; B/axis 90°. -- Motors on Drives:. Headstock (A/axis) - 15.8 KW (21.1 HP) 0 to 1,500 RPM,; Y/axis - Saw blade (Y/axis, Y2 unit) - 9 KW (12.1 HP), 1,0000 to 4,500 RPM; Narrow Sanding Belt (Y/axis, Y4 unit) - 0.5 KW (0.67HP), 3,000 RPM; Router Spindle - 7.5 KW (10 HP), 22,000 RPM. -- Tool Holder type: HSK F63. -- Total Power installed: 45 KW. -- Overall Dimensions/Weight: 5300x3800x3000(H) mm. (209"x150"x119"). -- Actual Model: TKC1500DS -- Comes with a 240/400 V, 3 Ph, 60 Cy Transformer

KILLINGER KM-150 Bench-Top Flute & Barley Twist Machine for Right & Left-Hand Barley Twists & Straight FlutingsSpecifications: -- Maximum workpiece diameter 200 mm (7.87"), Maximum milling length 1,650 mm (64.96").Equipped with: -- 24-Position Indexing plate.Complete with: -- Legs.NOTE: No Router.Dimensions: 81" x 19" x 48" H.Weight without Legs: 110 Lbs.

LA NUOVA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,Specifications: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads was patented and requires no maintenance. -- Includes: Lot of tooling. Table for flat/horizontal copying.Note: Machine completely gone over and all heads rebuilt in 2011 and used sparingly since.Actual model is 201-16.

LA NUOVA SCOLPITRICE MultiSpindle Carving Machine. -- General Data: (16) Cutter Stations, 78" max. workpiece length, 60" carving cap.; (16) dual carving heads, 7-7/8" between spindles, 20" max. working dia.; each head has a roughing & finishing spindle, all heads swivel 360 degrees with pneumatic locking. regulator broke and needs correct fittings for new regulator. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. Pneumatic chucking of material, stock turns 360 degrees. - Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads is patented and requires no maintenance. - Needs new gear for traversing feed. --Machine is on the trailer. You would be buying all of it. Buyer responsible for frieght but I can help arrange and load. --÷Included in purchase: --16 spindle machine La Nouva Scolpitrice. --20x8 deckover trailer. -- 40HP rotary phase converter --Transformer --2 frequency converters (can be seen on back of trailer) --Machine works great, was used to rough out bear carvings for my business. 1.5kw spindles. 1/2" bit shank size. You can have a roughing bit in one side and finishing bits on the other side. In a couple pictures you will see some dumbells in place of the spindles. Those pictures were taken during a time where we were doing annual maintenance on the spindles and we put weights there to balance machine out and continue working. You can run either 8 or 16 spindles at a time, (with (8) spindles it gives you much larger diameter to run) I want to say 450mm diameter max. I can verify later. Or 225mm for 16 spindles. It can do about 5' in length and has a flat table attachment as well. I could do a run of 8- 17" pieces in about 30 minutes. This machine is very reliable and takes minimal effort to learn. It comes with a stylus set to match the bits you want to use. Spindles just had new high end bearings installed before taking machine out of shop. Overall the machine is in good shape. . --Trailer:was used for our log hauling for many years. 20' deck. 25' or so overall. Has a new pressure treated deck under the machine.only. -- Phase converter: 40 HP single to 3 phase converter with easy start. Works great and is only 3 years old with not many hours on it. Runs very smooth. Comes on a pallet --÷Transformer: works great never had any issues with it. Comes on pallet as well. --÷Frequency converters: came with the machine and they are currently wired into the machine. Each one powers 8 spindles. They work like they should with no issues.

LA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,Specifications: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads was patented and requires no maintenance. -- Includes: Table for Flat Work (2,000 mm); Rotary Device (1400mm); Automatic Chucking;Pneumatic; Clamping of Motor Carrier Shaft; (6) Sets of carving Bits with stylusActual model is 201-16.