Woodworking Equipment For Sale

DETEL M-2H Line Boring Machine.(2) Line boring heads with (25) spindles each on 32 mm centers, drills from bottom up.Equipped with: -- (2) 2 HP motors drive spindles at 3,400 RPM. Hand crank adjusts the opening between heads from 5" - 25" w/mechanical digital readouts, drilling depth up to 2-1/2". -- Dust Collection on each head. -- Hardened steel gears are pressed onto the spindle shafts. -- 120" Back fence with (4) large flip-stops. -- (2) Pneumatic index pins with independent switches for sequence boring on long side panels. -- (2) Overhead pneumatic hold-downs. Complete with: -- Standard screw-in 10 mm collets; air/electrical controls, pneumatic oiler, and foot pedal actuator for clamping & boring cycle.

ADWOOD/DETEL M29 Construction & Line Boring Machine (32 MM); Vertical/horizontal drilling, (29) spindles, drills vertically from the bottom-up, horizontally from the back or any angle between 0° - 90°, tilting action of boring head is pneumatically controlled.Distance between the 1st - last spindle 35.2", max. boring depth 3", boring head with (2) 2 HP - 2,800 RPM motors, 44" x 21.4" table size.Complete with: (4) Pneumatic holddown cylinders, left- & right-hand side fences with (2) mechanical flip-stops, and foot pedal control for clamping & boring cycle..

Detel M-2H Boring Machine (2) 25-Spindle Boring Heads

DETEL M-2H DOUBLE ROW LINE BORER.(2) Line boring heads of (25) spindles each on 32 mm centers, drills from the bottom up.Equipped with: -- (2) 2 HP motors drive spindles at 3,400 RPM. Hand crank adjusts the opening between heads from 5" - 25" w/mechanical digital readouts, drilling depth up to 2" -- Hardened steel gears that are pressed onto the spindle shafts, 120" back fence with (4) large flip-stops. -- (2) Pneumatic index pins with independent switches for sequence boring on long side panels. -- (2) Overhead pneumatic hold-downs. -- Complete with standard screw-in 10 mm collets; air/electrical controls, pneumatic oiler, and foot pedal actuator for clamping & boring cycle.Optional: Dust Collection on each head. Quick change collets.

DEVAIR 447 15 HP 2-Stage Horizontal Tank-Mounted Air Compressor Specifications: Cap. 51.8 CFM, Max. pressure 175 PSI. Complete with: 120 Gallon Cap. 24” Dia. x 60” L Horizontal Air Receiving Tank. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

Several Dewalt Radial Arm Saws

DEWALT - 35 Series Super Duty, ...22" Radial Arm SawSpecifications: -- 7.5 HP TEFC Saw motor; 22" dia. blade; 52" long arm; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90°; 26" crosscut cap.; 40" rip cap. -- Complete with: -- Blade guard, magnetic starter, stand, and carriage return mechanism. -- Optional: Electric brake.

DEWALT 10" Radial Arm Saw. -- Specifications: -- Blade diameter: 10"; Table size: 27" x 30" x 36" H.

DEWALT GA 16" Radial Arm Saw Specifications: -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90°, 19" crosscut cap., cutting 1" board with long arm. -- Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. -- Optional: -- Electric brake. -- Photo not of actual machine.

DEWALT GE 20" Radial Arm Saw Specifications: -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; -- 6" Thickness cap. @ 90°, 27" max. crosscut cap. cutting 2" board; 42" rip cap. with 52" long arm; 2" dado capacity. Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. Includes: -- (1) New 20" blade.Optional: -- VFD Electric brake.Note: Photos are not of actual machines, but they represent the state of "Reconditioning"

Dewalt Radial Arm Saw

DIEHL 55 Straight Line Ripsaw:Specifications -- 15HP - 3,450 RPM Direct drive arbor motor, -- 2" dia. arbor, 18" blade cap., 4" max. depth of cut, -- 12" min. part length, -- 21-1/2" width of table to the right of blade & 30" to the left, 43" table length. -- 2 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; twin chain drive,Equipped with & Features -- Automatic dip lubrication. -- Top pressure system with (6) full width rollers & (2) split rollers over blade. -- All cast iron machine -- Runs very nice --Complete with: Rip fence,.

DIEHL ESL-10 Straight Line Rip Saw, with Laser Specifications: Table size 39-1/2" x 52" x 35" H. Throat 17-1/2". Distance from front of blade to table 21-1/2". Max. blade dia. 16". Max. thickness 1-1/2". Guaranteed glue joint length 48". Feed speed 30 FPM. Equipped with: 10 HP Blade motor with Automatic brake. Pyramid corrugated feed chain, with 1 HP Motor. (5) Pairs of 2-1/2” Dia. x 1-1/2” W Hold-down rolls. 20-1/2” L x 2” H Fence. Upper & Lower anti-kickback fingers. Manual feed chain lubrication. Complete with: Installation, Maintenance & Operating Instructions. Laser. 11-3/4" Dia. Blade. (4) Swivel Casters.

DIEHL DL-405 MOULDERSpecifications: -- 5-Head, 8-5/8" x 4-1/2" cap. -- Head sequence: Bottom 15 HP, right 10 HP, left 10 HP, top 15 HP, bottom 10 HP motor; all spindles 1-13/16" dia., belt driven at 6,000 RPM; detachable jointers on side, top, and bottom spindles, spindles reversing on side heads; -- Mechanical digital readout for left horizontal spindle & top vertical spindle. -- 5 HP Feed motor, Cardan drive, variable feed speed 22 to 135 FPM, motorized feed beam, dual action holddown, powered lower infeed and outfeed rolls, pneumatically pressured feed rolls and top chip breakers with separate regulator and gauge for rolls after the top spindle.Equipped with: -- Automatic bed lubrication, hardened bed plates, attached operator's console, sound enclosure, 77" x 9" straightening table.- Also includes dust collection manifold.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6g DIEHL NO. 75 18" Straight Line Rip Saw Specifications: Table size 52-1/2” x 80” x 34” H. Throat 21". Distance from front of blade to table 36". Max. blade dia. 18". Adjustable arbor dia. 2". Min. stock length 12". Max. stock thickness 4-1/4". Max. depth of cut 4". Variable feed speeds 40 - 145 FPM. Equipped with: 15 HP - 3,500 RPM Blade motor. Automatic arbor brake. 8-1/4" W Dual 4" W Pyramid corrugated feed chain, with 3 HP Motor. (8) 8” W hold-down rolls, Each with (4) 1-1/2” W Segments. Upper anti-kickback fingers with Cam height control. Automatic lubrication. Complete with: 29” W x 1-3/8” H Cast-Iron Fence.

DIEHL SL-55 Straight Line RipsawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade cap. -- 4" Max. depth of cut, 12" min. part length -- 20-1/2" width of the table to the right of blade & 30" to the left, 66" table length.Equipped with & Features: -- 3 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; -- Twin chain drive. -- Automatic drip chain lubrication. -- Top pressure system with (6) full-width rollers & (2) split rollers over the blade.

DIEHL STRAIGHT LINE RIP

MLS Number 10682943 DIEHL SL52 STRAIGHT LINE RIP SAW Bottom arbor 4-1/4"X8-1/2" capacity 15 HP 3,545 RPM arbor drive motor Infeed speed up to 200 FPM Serial# 10/88M-5312-4728 Voltage: 460/60/3 phase Amps: 21.7 Wiring diagram # 2-9000-0026 Was removed from service in November 2020

Diehl Straight Line Rip Saw

Diehl SL50 Straight Line Rip Saw 240 volt 3 phase Variable speed control SN: 51108