Woodworking Equipment For Sale

FRIULMAC Quadramat Double End Tenoner:This machine is set up with (4) four profiling units left and right for a total of (8) eight -- 1,500 mm (59") Max. x 95 mm (3.7") min. opening -- Loading space 1,041 mm (41") -- Thickness 10 - 100 mm (0.4" to 3.9")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorized opening with LED readout on the control panel, approx. 25" infeed in front of hold downs. -- Variable speed feed 6-28 M/min. , feed motor 4.5 HP -- Feed chain 2-7/8" wide with rubberized pads -- Top pressure with non-stainable stretching wheels driven by gear motor and inverter with speed adjustment synchronously to chain feeding speed -- Infeed fence on left side -- Machine left side fixed, right side adjustable -- Complete control panelWorking Stations: -- 1st station: Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 2nd station Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 3rd Station : Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 4th Station: Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm NOTE: machine will require some rebuilding and maintenance in regards to ball screws and Dovetail Guides per statement by current owner. They are replacing it with a new machine.

FRIULMAC - Dual-Feed, ...Double End Cut-Off SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table.Specifications: -- 79" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper Magazine - material capacity: Min. length: 7.87" (200 mm), max.: 79" (2,000 mm); width: 1-1/8" (30 mm) to 6-3/4" (170 mm); and thickness: 0.59" (15 mm) min. up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side is equipped with: -- (2) Trim saw motors, 5.36 HP each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit: 4 HP (3 kW) motor. -- Trimming & throughput capacity: Up to (55) pieces/Min.NOTE: Voltage transformer for 600 Volts available with the machine

Friulmac Rondamat E End Matcher

The Friulmac Randomat/SQ End Matcher has a Length Capacity 14" to 120" Width Capacity 2" to 10" Thickness Capacity .32" to 1" Feed speed 4 to 30 M/min Feed motor 15HP Scoring motors 4HP with 30mm diameter shaft, 7600 RPM Trim/Hogging motor 7.5HP with 40mm diameter shaft, 6000 RPM Profiling unit J-33 - 7.5HP with 40mm shaft, 6000 RPM Profiling unit J32 - 10HP with 40mm diameter shaft, 6000 RPM

- End Matcher for the Continuous Feeding of Random Length Work Pieces - Minimum Working Length: 160mm (6.3") - Working Width: 30-250mm (1.18"-9.84") - Working Thickness: 10-30mm (0.39"-1.18") - Two 7-1/2 HP, 3ph Profiling Motors - Spindle Speeds: 6,800 RPM - Spindle Diameters: 40mm - Cutterhead Feed Motor: 1 HP - Two 1-1/2 HP Motors for Infeed/Outfeed Conveyors - Infeed/Outfeed Conveyor Sizes: 123" x 11" - Sound/Safety Enclosure - New in 2004 - Current Voltage: 460V

Friulmac Dualfeed Double End Chop Saw & Moulder Feeder Friulmac Dualfeed Automatically Trims Workpieces and Feeds into a Moulder Cutting Length: 200mm - 1500mm (8" - 59") Cutting Width: 30mm - 110mm (1.2" - 4.3") Cutting Thickness: 15mm - 60mm (0.6" - 2.4") Trim Saw Motors 5.5HP (4KW) Feed Motor 3.5HP (2.64KW) Anti-Kickback Spring-loaded Top Pressure System w/ Manual Adjustment and Readout Manual Board Length Adjustment w/ Readout Manual Blade Height Adjustment w Readout Hopper Fed Voltage: 460V 3PH

Sanding wheel shaper for the production of profiles on the sanding wheels. -- Template carrier holds metal or plexiglass template (same as can be used on the moulder knives). -- Spindle length 5" with 1" diameter arbor for wheel support. Handles 8" diameter wheels (3) included with the machine. -- X and Y axis on dovetail slide with lineal bearing support for smooth movement during the wheel grinding. Pneumatic clamping on grinding wheels. Depth of grinding 1.5" for raised panel. -- Tilt capabilities from 0 to + 30°. -- Grinds all types of varda wheels on 1 HP motor with speed of 1,750 RPM. --You can customize this machine to you needs.

G & P - EPN, ... Pump Sander (Double-Sided), -- Double-end direct-drive pneumatic Drum Sander. -- 2 HP Motor - 3,600 RPM motor speed. -- (2) 1-1/4" Dia. x 10" long shafts.

Gannomat Pro-Line 50 • Row of holes as well as line drilling in the SYSTEM 32 mm • 50 (2 x 25) holes in one drilling cycle

GANNOMAT COMBI 110 CONSTRUCTION LINE BORER(23) Spindle head, 2 HP - 2,800 motor, 31-1/2" max. working width, 3" drilling stroke, drills vertically from bottom and horizontally from rear, tilts pneumatically from lower to rear position with positive stop at 45° for angle drilling. -- Holddown clamp assembly tilts 90° for clamping short panels vertically for edge boring, no need to swivel boring head, hydraulic brake for through boring. -- Complete with: (4) Pneumatic holddowns, mirror imaging fences, 4,000 mm line boring fence w/stops and 1,500 mm butt joint fence with (2) flip stops.

GANNOMAT - 260: Case Clamp (Semi-Automatic) Specifications 100" x 50" x 26" Clamping Cap. -- (3) Vertical combination air cylinders & shoes; mounted on horizontal beam for top pressure; 0.33 HP motor for up/down travel. -- (2) Combination air cylinders & shoes mounted on adjustable vertical, side pressure beam. Vertical beam locks in place with: (4) Air cylinders and rides on bearings for quick and easy positioning. -- Push button operated w/independent pressure control for top or side; air pressure up to 125 PSI (Clamp shoe assemblies are interchangeable from vertical to horizontal). -- Complete with:Pressure gauges; timer control with: (0 - 30) Min setting.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.