Woodworking Equipment For Sale

UNIQUE 80 Face Frame Assembly. The UNIQUE Face Frame Assembly System simplifies the assembling process. -- This is to ensure flush alignment of frames regardless of thickness of material. -- Major face sanding is eliminated. -- 60° Laminated 5' x 12' assembly table, squaring bar. -- Over arm with 5 hold down clamps.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

UNIQUE 280-3-60 Door ClampThis 3' x 6' Door Clamp Table on a 60° angle, is designed for ALL shops to accurately square and clamp cabinet or entry doors, panels, etc. -- The UNIQUE magnet and pin combination mounted air cylinders, allows the operator to move them to any location on the table. -- Includes; (4) cylinders, (1) foot valve and (1) squaring bar. One or more projects may be clamped simultaneously on this diversified table.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

UNIQUE 285 Door Clamp This 6' x 12' Door Clamp Table, is designed for ALL shops to accurately square and clamp cabinet or entry doors, panels, etc. -- This table set at a 60° angle allows (2) operators to work side by side. -- The UNIQUE magnet and pin combination mounted air cylinders, allows the operator to move them to any location on the table. -- One or more projects may be clamped simultaneously on this diversified table. -- Includes; (10) Cylinders and (2) squaring bars and (2) Foot valves to accomodate (2) operators. -- Options; Overarm with (5) cylinders and (1) Foot valve. -- (4) zone operation with center squaring bar, (2) extra foot valves and (6) extra clamps...ask Product Manager

UNIQUE 280-4-60 Door Clamp. This 4' x 8' Door Clamp Table, set at a 60° angle for more comfort, is designed for ALL shops to accurately square and clamp cabinet or entry doors, panels, etc. -- The UNIQUE magnet and pin combination mounted (6) air cylinders, allows the operator to move them to any location on the table. -- One or more projects may be clamped simultaneously on this diversified table. -- Includes: (6) cylinders, (1) foot valve and (2) squaring bars. -- Option; Overarm with (4) cylinders and (1) Foot valve NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

UNIQUE 71 Pocket Hole Boring Machine -- The UNIQUE "71" is a Single Spindle Pocket Drill capable of producing screw holes with unlimited spacing. -- The heavy-duty industrial construction has proven to give years of service with minimal maintenance. -- Push button control. -- Brand New with Warranty!NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

UNIQUE 73 Pocket Boring MachineThe UNIQUE "73" Drill Tub is a pocket drill capable of producing screw holes with unlimited spacing. -- Heavy-duty industrial construction has proven to give years of service with minimal maintenance. Push button control. -- Double spindle boring tub, 2 drills with counterbore.NOT IN STOCK - PRICING SUBJECT TO CONFIRMATION.

UNIQUE 310-40 1-1/4" Double-Sided End Cope Shaper Specifications: Max. length 40", Max. width 6", Max. thickness 1". Table size 13” x 42-1/2” x 37-1/4” H, Table travel 14-1/2”. Spindle dia. 1-1/4". Equipped with: (2) 5 HP - 3,450 RPM TEFC Motors, Counter-rotating spindles. Pneumatic hold-downs, Foot pedal control. 39-1/4” L x 1/2” H Fence. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

UNIQUE "318-3" Rail MachineThe UNIQUE "318-3" Rail Machine is designed to cut precise profiles in rails, ideal for higher volume or production applications. -- Climb cutting provides better than moulder quality cuts, capable of cutting up to 35 FPM. -- Equipped with: 10 HP HIMMEL Direct Drive Motor, 1-1/4" Spindle with 5-1/4" stack height for tooling with up to (3) cutters on the spindle. -- Max. Material width 8", max. material thickness 2", Z-axis spindle movement adjustable with a digital indicator. -- Complete with:In-feed fence with digital read out, dust collector hood with 4" outlet; emergency stop and cutter shields.

Unique 325 Edge Profile Shaper/Sander -- 2" maximum panel thickness -- Control panel, Start/stop for four (4) station -- Speed control for sanding stations (3 and 4) -- Start/stop for conveyor and feed speed control -- Bottom feed track and top pressure rollers -- Outboard support rail -- Variable feed track speed -- Load meter -- Two (2) shaper stations -- 7.5 HP, 7,200 RPM -- 1-1/4" spindle diameter, 5" spindle length -- Adjustable height -- Dust shrouds -- Two (2) sander stations -- 1 HP, Variable RPM -- 1" spindle diameter, 5" spindle length -- Adjustable height -- Air jets -- Dust shroudsNOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

UNIQUE 310 Double-Sided End Cope ShaperCopes multiple workpieces up to 5" wide x 24" long in only (1) pass, quickly and accurately on both ends. -- Equipped with: (2) 5 HP motors with magnetic starter, 1-1/4" dia. shaper spindles with counter-rotating cutter-heads eliminate tear-out on detail edge of cope/tenon cuts; pneumatic safety clamps hold work in place until sliding table is returned to its forward position. -- Complete with: Automatic lock on sliding table, separate backboards, dust hoods, and foot pedal controls -- Includes: Emergency stop, disconnect and lockout features -- Utilities: Compressed air requirements: 100 PSI, 1 CFM; Dust collection: 1,200 CFM per spindle; Machine weight: 600 Lbs.NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Unique 280-4-45 Clamp Specifications: -- 4' x 8' Table with perforated steel bed, mounted on a 45° angle; randomly holds air cylinders for side or top pressure. -- Complete with: (6) Universal 3" stroke pneumatic cylinders, (1) Squaring bar, and foot valve.NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

UNIQUE 313 Automatic Cope and Dowel Door MachineMiters the end and drills for dowels of (2) cabinet door rails on each pass, automatic cycle for accurate & easy alignment of mitered corners.Equipped with: -- (2) 5 HP Dual-motor set for shaping w/1-1/4" spindles; (2) 1/3 HP dowel alignment drills. -- Automatic cycle with dowel hole boring for accurate alignment of mitered door corners in (15) Seconds per cycle, -- 1" Material thickness capacity, 4" max. material width, 5" max. cutter diameter. Features: -- (2) Pneumatic clamps holds material during operation for safe machining of parts, Adjustable stops for dowel drilling, Air over oil rod-less cylinder driven table. -- Staggered tables with angled fences allow (2) 1" thick parts to be machined simultaneously; digital position indicator. -- Dust Collection: (2) 5" Dust ports require approx. 1,000 CFM per spindle.Includes - Standard Finger joint shaper heads to cut miters and drill bits for doweling.

UNIQUE 2753 Arch Shaper with Sanding HeadThe Unique Model 2753 Is A Single End Machine Designed For High Quality, High Production, Cabinet And Passage Door Arching Of Top Rails And Panels. Its Two Counter-Rotating Spindle Motors are Easily Programmed For Multiple Cuts With Hogging And Finishing Cutters To Eliminate Tear-Our And Extend Tool Life. A Sanding Station Provides A Multi-Pass Sanding Finish On Arched Door Panel Profiles. Unique “ArchPro"; Software Guarantees High-Speed Measuring And Fully Dynamic Programming Abilities.• Shaper Motor: (2) 10 HP Himmel Direct Drive , 440V - 39.2A, 3PH Motor• 5" Stack Height • Compressed Air Requirements: 90 PSI - 2 CFM• Dust Collection: (2) 5" Diameter 1200 CFM each (1) 4" Diameter 800 CFM each• Work Height: 3’6"• Machine Footprint: 113" Width X 78" DepthIncludes - Safety Mats, Dust Collection Manifold, and Owner's Manual

UNIQUE - 313, ...Automatic Cope & Dowel Door MachineMiters the end & drills for dowels of (2) cabinet door rails on each pass; automatic cycle for accurate & easy alignment of mitered corners.Equipped with: -- (2) 5 HP Dual motor set for shaping w/1-1/4" spindles; (2) 0.33 HP dowel alignment drills. -- Automatic cycle with: Dowel hole boring for accurate alignment of mitered door corners in (15) Sec/cycle. -- 1" Material thickness cap., 4" max. material width, 5" max. cutter diameter. Features: -- (2) Pneumatic clamps hold material during operation for safe machining of parts; adjustable stops for dowel drilling; air over oil rodless cylinder driven table. -- Staggered tables with angled fences allow: (2) 1" Thick parts to be machined simultaneously; digital position indicator. -- Dust Collection: (2) 5" Dust ports require approx. 1,000 CFM per spindle.

UNIQUE 2700 CNC CNC Door ShaperCNC Controlled Machining Center for Raised Panel Doors.Equipped with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK rails.Features: -- Windows based PC computer with large touch screen menu for quick set-up, new door or custom door stiles can be programed in minutes, automatic operation from one style and size of door to the next, straight raised panels & widths of stile or rail and end tenoning work the same. -- Electronic sensors measure the length of the part to be cut allowing for various width panels or rails to be shaped consecutively, once a door is pre-programmed it can be re-called.Complete with: Electronic brake on spindles, (2) 5" dia. outlets for dust collection and UNIQUE's Windows based "Raised Panel Door" Software. .

UNIQUE 4522 Shape and Sand with DOUCET Return Conveyor(4) Stations (2 Floating shapers, 2 floating sanders), each with 5" stack capacity.Configured as follows:(2) Shaper Stations with: 10 HP Direct drive HIMMEL motors, 1-1/4" dia. arbors.(2) Sanding Stations with: 2 HP Direct drive BALDOR Motors, 1" dia. arbors tiltable up to 45 °.Sanding Stations are variable speed from 6,000 - 9,000 RPM and reversible.Shaper Stations are variable speed from 6,000 to 9,000 RPM and reversible.Specifications & Features:Variable speed conveyor speed from 0 - 35 FPM; 6"Heavy Duty conveyor and roller hold-down system.Features: Digital indicators for both horizontal & vertical adjustment on all spindles from the front.PLC Controlled "jump-cope"; machine is equipped with Windows/XP-based computer touch-screen & software. - Software stores feed rates, positions, cutter rotation, profile pictures, and RPM settings.Includes "DRO" Option: (Software and hardware upgrade from standard "Trueset" software - linear encoders on each station send real-time location of spindle back to the computer and give the operator the desired position; Machine will not start until all spindles are manually brought to the correct setting; a ...$ 10,950 value option).Includes Optional "Inset" automated size &squaring infeed fence ($ 16,850.00 option value).Max. material thickness - 2-1/2"; min. material width - 1-1/2" plus the depth of the cut.(2) 5" Dia. dust ports and (2) 4" dia. dust ports; Tooling not included.Complete with: DOUCET Feedback Return Conveyor ($ 10,000 option value).Floorspace required with DOUCET Return is 17-1/2' x 10'.

UNIQUE 250 GT2 Automatic Raised Panel Door ShaperMachine to manufacture raised panel cabinet doors with (1) operator in (2) Min.Specifications: -- Two Counter-Rotating Variable Speed Direct Drive 10 HP Shaper Motors. -- 5" of vertical stack height, capable of stacking up to (3) cutters. -- Three (3) Position Turret for quick change over between profiles. -- The change from one cutter to another is achieved via a select switch for each operation. -- Two-position pneumatic stop system positions automatically when cutters are selected -- Easy to read positioning scale allows for accurate centering of Arched panel and rail. -- Free-floating table w/pneumatic holddown has a 2-way linear movement for straight or cathedral top doors up to 55" long.Complete with: -- (1) Set of templates (998800). -- One set of tooling included. Set includes Unique 410 cope / rail cutters and 460 panel cutter with back cutter. -- Please call for other options.

UNIQUE 310 Automatic Cope Shaper; Copes multiple workpieces up to 6" wide x 24" long in only (1) pass, quickly and accurately. -- Equipped with: (2) 5 HP motors with magnetic starter; (2) 1-1/4" dia. counter-rotating cutterheads eliminate tear-out on detail edge of cope/tenon cuts. -- Pneumatic safety clamps hold work in place until sliding table is returned to its forward position.

United Newcorp 910 Drill Press1.5 HP, Belt-drive, 3/4" capacity

It is a 2 saw re-rip with one moveable saw and an adjustable fence. Capacities: Minimum length = 8” Maximum length = 192” Minimum width = 1 ½” Maximum width = 6” Minimum thickness = 7/8” Maximum thickness = 1”