Morbidelli AUTHOR 504 Boring Machines For Sale

MORBIDELLI AUTHOR 504 R CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Cap. "X" Axis 139-3/8" (3,540 mm); "Y" axis 48-3/8" (1,230 mm) for routing & 39.6" (1,008 mm) for boring; "Z" axis 3.1" (80 mm). -- Positioning Speed:"X" Axis 213 FPM; "Y" axis 131 FPM; "Z" axis is 65 FPM. -- Worktable:(8) Adjustable panel supports each with: (3) Vacuum pods; worktable setup for (2) independent working areas. -- Boring Unit:(29) Independent vertical boring spindles forming a T-configuration with: (15) Spindles on the "X" axis and (14) spindles on the "Y" axis.A total of (8) horizontal spindles with: (3 + 3) on "X" Axis; (1 + 1) on "Y" axis. -- Machining:(1) 9 HP (7 kW) Vertically mounted router; inverter driven (FUJI) at 12,000 - 18,000 RPM.(1) 8-Position ATC for Automatic Tool Changer. -- Operator & Machine Control:"NUM CN" Loaded onto a HP, PC Based Controller mounted in separate control cabinet.15" VGA Color monitor and ergonomic keypad. Remote Control Pendant: Allows the operator to move around and still control all the axis movements, speed, and emergency stop.Includes: USB Ports; (2) serial ports RS-232 & RS-242 (requires no 3rd party CAD system for downloading programs). XILOG-PLUS OPERATOR Interface: Offers incredible list of: Functions from (a) Auto. diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria; programs can be transferred via diskette or downloaded by wire. Equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes; on-board cycle optimization, on-board calculator, mirror imaging, and repeat imaging. -- Complete with:(1) 100 cbm/Hr Vacuum Pump. -- Actual model is: MORBIDELLI - Author 504 .

MORBIDELLI AUTHOR 504 CNC MACHINING CENTER (W/ATC/BORING/"C" AXIS): -- Specifications Working cap. "X" Axis 122" (3,100 mm);, "Y" axis 48.4" (1,230 mm) for routing, 40.9" (1,041 mm) for boring; "Z" axis stroke 4.5" (115 mm) max. material thickness 3.1" (80 mm). -- Positioning SpeedPositioning speed on: "X" Axis is 213 FPM (65 MPM); "Y" axis 131 FPM (40 MPM); "Z" axis is 65 FPM (20 MPM). -- Work Area:(8) Adjustable panel supports with: (4) Pneumatic lifter roller bars for heavy panels.(8) Pop up front stops; (8) pop up backstops; (2) LH pop up side stops; (2) RH pop up side stops. Each panel support with (3) vacuum cups.Worktable setup for (4) separate working areas. -- Boring Unit(1) 4 HP (3 kW) Motor with (29) Independent vertical boring spindles forming a T-configuration.(15) Independent spindles on the "X" axis and (14) independent spindles on the "Y" axis.Total of (8) horizontal spindles for boring on all (4) edges of the panel: (3 + 3) on the "X" axis & (1 + 1) on the "Y" axis. -- Machining(1) 10 HP (7.5 kW) ISO 30 Vertically mounted router with "C" axis for 360° horizontal processing; inverter driven (FUJI) at 12,000 - 18,000 RPM. (1) 10-Position ATC tool rack mounted in the LH side of the machine. -- Operator & Machine Control"ESA TRIA 7500" CNC 32-Bit Multiprocessor (100% MS/DOS compatible); 1 MB RAM, 80 MB hard disk.12" Monitor; ergonomic extended keypad with: (18) Function keys; 3-1/2" floppy disk drive; RS-232 serial port can be linked directly to IBM compatible PC.The "TRIA 7500" offers an incredible list of functions from (a) autodiagnostic to (z) zooming.Programs can be transferred via diskette or download by wire is possible. -- Complete with:&#9679 Voltage stabilizer &#9679 208/230/460 V, 3-Phase Autotransformer &#9679 (1) 100 cbm/Hr "BECKER" vacuum pump &#9679 Auto lubrication of guides & "Y/Z" ball screws &#9679 manuals/documents/backup disk -- Actual model is: MORBIDELLI Author 504 STC.

MORBIDELLI AUTHOR 504 CNC MACHINING CENTER: -- Specifications Working cap. "X" Axis 122" (3,100 mm);, "Y" axis 48.4" (1,230 mm) for routing, 40.9" (1,041 mm) for boring; "Z" axis stroke 4.5" (115 mm) max. material thickness 3.1" (80 mm). -- Positioning SpeedPositioning speed on: "X" Axis is 213 FPM (65 MPM); "Y" axis 131 FPM (40 MPM); "Z" axis is 65 FPM (20 MPM). -- Work Area:(8) Adjustable panel supports with: (4) Pneumatic lifter roller bars for heavy panels.(8) Pop up front stops; (8) pop up backstops; (2) LH pop up side stops; (2) RH pop up side stops. Each panel support with (3) vacuum cups.Worktable setup for (2) separate working areas. -- Boring Unit(1) 4 HP (3 kW) Motor with (29) Independent vertical boring spindles forming a T-configuration.(15) Independent spindles on the "X" axis and (14) independent spindles on the "Y" axis.Total of (8) horizontal spindles for boring on all (4) edges of the panel: (3 + 3) on the "X" axis & (1 + 1) on the "Y" axis. -- Machining(1) 10 HP (7.5 kW) Vertically mounted router; inverter driven at 12,000 - 18,000 RPM. -- Operator & Machine Control"ESA TRIA 7500" CNC 32-Bit Multiprocessor (100% MS/DOS compatible); 1 MB RAM, 80 MB hard disk.12" Monitor; ergonomic extended keypad with: (18) Function keys; 3-1/2" floppy disk drive; RS-232 serial port can be linked directly to IBM compatible PC.The "TRIA 7500" offers an incredible list of functions from (a) auto-diagnostic to (z) zooming.Programs can be transferred via diskette or download by wire is possible. -- Complete with:&#9679 Voltage stabilizer &#9679 (1) 100 m³/Hr vacuum pump. -- Actual model is: MORBIDELLI Author 504.