Woodworking Equipment For Sale

Combination Head Motor HP 18 HP Motor Type Single Speed Abrasive Belt Speed 18 mps Drum Size 120 mm Drum Type 85 Sh Rubber Platen Size 50 mm Abrasive Belt Length 60" 1st Working Unit Working Width 950 mm Number of Heads Available 1 Feed Motor .7 HP Feed Speed 15 or 30 fpm Maximum Work Piece Thickness 160 mm Minimum Work Piece Length 12.5" Abrasive Belt Size 37" X 60" Compressed Air Requirements 6 Bar (88 PSI) Dust Outlets 1 outlet @ 140 mm Exhaust Requirements 900 CFM Power Requirements 54 amps @ 230V Three Phase

Table: 14’x5' X-axis: 120? Y-axis: 51? Z-axis: 12? RPM: 6,000 Dimensions: 255?x118?x106? Weight: 14770 Equipped with: Dust Collector Tool changer: 12

SCMI Pratix CNC Router 5x12 Table Scissor Lift Outfeed Table (2) 10 HP Vacuum Pumps Transformer Ready to load!

SCMI Olimpic S215 Edgebander

SELCO WNT 7/730 REAR LOAD, AUTOMATIC PANEL SAW -- Specifications: 177" (4,500 mm) Overall cutting length, 5" (127 mm) max. saw blade projection, 29 HP (22 KW) main & 3.5 HP (2.6 KW) scoring motor. -- Saw Carriage:Variable saw carriage speed from 0 - 606 FPM (0 - 185 MPM), return speed 600 FPM (185 MPM); Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (8) pneumatic gripper clamps (open up to 5" / 128 mm).Forward speed of 295 FPM (90 MPM) & return speed of 295 FPM (90 MPM); rack & pinion drive, driven by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Selco "OSI" + WINDOWS "7" operating system with easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by industrial keyboard & mouse, floppy disk or CD; direct downloading from office PC is possible.OSI (Open Selco Interface) guarantees fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself and, when necessary, to the width of trim cut too. -- Rear Load Lift Table:Automatic lift table 173" x 87" (4,400 x 2,200 mm), 12,000 Lbs (5,455 KG) lift capacity.4 HP (2.3 kW) Motor for raise-and-lower, encoder-controlled guide rods for automatic book height adjustment; 28.7" (730 mm) max book height w/o a pit or risers. -- Rear of machine:(3) Lateral aligners to accurately position book of panels on rear table prior to cutting.Rear modular roller support rails with 80 mm dia rollers; rear of machine enclosed for safety. -- Front of machine:Automatic side/crosscut aligning device located inside the pressure beam aligns the panels against the right angle fence prior to cross-cutting, 2.4" - 87" (60 - 2,200 mm) stroke.90" (2,300 mm) Long crosscut fence (front-to-back); (4) Front mounted air flotation tables with rounded fronts 26" x 81" (650 x 2,050 mm). -- Complete with: "Quick Change" saw blade system; "DIGISET" electronic scoring adjustment; Selco "Quick-Opti" optimizing software; CP link. -- Options Include:173" x 87" (4,400 x 2,200 mm), LH facing, rear in-feed/out-feed conveyors with fork cut-outs that allow for staging/loading/unloading from the Rear LH side of the machine. -- Actual Model is SELCO WNT 7/730/4500.

SELCO - EB 70 L, ...CNC Front-Load Horizontal Beam CNC Panel SawSpecifications & Features -- 126" (3,200 mm) Overall cutting length, 2-3/4" cutting height (80 mm saw blade projection); 10 HP main & 3 HP scoring motor. -- Modular roller rear machine table; side aligning device for squaring ripped strips out to 59". -- Variable saw carriage travel speed from: 0 - 164 FPM (0 - 50 MPM). -- Electronically controlled overhead program fence; rack & pinion driven; forward speed of 80 FPM, 131 FPM return speed.Equipped with: -- (6) Clamps (open up to 70 mm - 2-3/4"); (3) are closely spaced in crosscut area & (3) are at equal distance in rip cut area; AC Servo motor drives on both saw carriage & pusher fence. -- PC Controller with: Graphics color monitor & "Assist Line"; LED readout integrated into "high tech" look operator control panel (displays cutting dimensions & patterns), (400) cutting patterns with (50) different dimensions for ea. pattern, self-diagnostic. Machine Features -- 1,500 mm (59") Long crosscut fence (front-to-back); (1) side/crosscut aligner. -- (1) Front mounted air flotation table in the crosscut area (24" x 80"), and (2) front mounted air flotation tables with patented rounded front for moving panel from rip to crosscut position (24" x 59" each). -- 36" Working height; rear of machine partially enclosed for safety.

Selco EB80 Panel Saw This machine has already been dismantled and removed from service. It is ready to load. - 2004 Selco EB 80 - Three air flow tables - 144? cut line - Rear programmable pushing fence - 7 grippers - Auto saw height up to 80mm - 18 hp main motor - Programmable saw carriage speed for cutting and return stroke - PC controller with software

Selco WNT 200 Rear Load Panel Saw S/N 400.066.94

Selco EB70 Panel Saw

Model: EB108 Active Description: cutting dimensions 4300x4400mm optimization main motor power 13,5kW scoring unit motor power 2,2kW cutting height 107mm 6 pneumatic clamps feeding speed 5-100m/min beam speed 80m/min Year: 2007

Giben WNAR6 Series Twin Pusher Angular Panel Saw Cutting length rip cut 3200 mm Cutting width cross cut 2200 mm Projection height 95 mm Lateral loading lift table with direct motorized infeed and right motorized infeed 2200 mm width interior panel turning station in the rip cut section Book aligners for both long and short rip stacks 17 material clamps Split pusher in the cross cut area

Selco WNT610 Rear Load Panel Saw Biesse Winstore Material Handling System This system is already dismantled by a technician and ready to be shipped. Installation can also be provided.

SELCO EB 120 FRONT LOAD, AUTO. PANEL SAW: -- Specifications:173" (4,400 mm) Overall cutting length & 169" (4,300 mm) pull back, 4.8" (122 mm) max. saw blade projection,Main saw blade projection is automatically adjusted according to the stack height selected, ensuring optimum cutting quality. 24 HP (18 kW) main & 3.5 HP (2.6 kW) scoring motor. -- Saw Carriage:Variable saw carriage travel speed from 0 - 427 FPM (0 - 130 MPM), 427 FPM (130 MPM) return speed,Travel speeds obtained by a brushless Servo motor with digital technology ensures a real CNC control without the use of sensors or micros switches. -- Pusher Fence:Electronically controlled overhead program fence, rack & pinion driven, forward speed of 0 - 263 FPM (0 - 80 MPM), return speed of 263 FPM (80 MPM). Equipped with: (7) Self-leveling gripper/clamps (open up to 4.8" / 122 mm), of which (4) are closely spaced in crosscut area and the other (3) are at equal distance in rip cut area.Design of structure and machine logic allow the total ejection of the cut stack of panels beyond the cutting line which facilitates the removal of the trim cuts produced. AC Brushless Servo motor with digital technology under direct monitoring of numerical control drives the pusher fence. -- Operator & Machine Control:Front-end PC controlled with: Color monitor integrated into high-tech look operator control panel (displays cutting dimensions & patterns), virtually unlimited cutting pattern storage capacity.Self-diagnostic, data input by keyboard or possible direct downloading from office PC. -- Machine equipped with:90" (2,300 mm) Long crosscut fence, (2) side/crosscut aligners (automatically positioned & monitored by the numeric control according to the width of the panels to be aligned).(4) Front mounted air float tables with rounded front for moving panel from rip to crosscut position 24" x 79" (609 x 2,000 mm) each;Rear of machine with Modular rollers and (2) longitudinal aligners to accurately position book of panels on rear saw table prior to cutting; partially enclosed with fencing for safety. -- Actual Model is SELCO EB 120L

Ball Milling machine.

SHENG-SHING - SDM-25, ...25" Wide Belt Sander1-Head; 24" width cap.; rubber-covered contact roll; approx. 10 HP motor. -- Abrasive belt size 25" x 48" with: Air tensioning & electronic abrasive belt tracking. -- 5-1/2" Max. height opening with: Manual raise & lower; variable feed speed drive. -- Complete with: Magnetic controls & dust outlet.

SHENG-SHING - SDM-15 ...Wide Belt Sander (Open Ended)15" Single Head Wide Belt Sander with open end for up to 30 " capacity. -- Sanding Head: 15" Wide (30" cap. with 2-pass); 8" Helically Grooved Rubber Covered Contact Roll with 7.5 HP Drive. -- Features: 0" - 6" Part thickness cap., 2-speed conveyor feed 12 or 16 FPM; 16" x 48" Abrasive belts with air tensioning, pneumatic abrasive belt tracking.

--This machine is in an Auction on exfactoryauctions.com-- SHODA MAXXIM 5' x 10' 2-Head CNC Router, with Vacuum Pump – Seller states that machine was run (1) shift from 2002 - 2006, then only a few days per year since! Specifications: Table size 63” x 122” x 29” H, with 3/4” Thick Top. Travels: X-Axis 133", Y-Axis 73", & Z-Axis 10". Max. machining feed speed 590 IPM. Max. positioning speed for X & Y-Axes 1,180 IPM. Equipped with: Moving single-zone vacuum table, with Extra-hard phenolic surface, Front-to-back configuration. (2) 12 kW (16 HP) - 18,000 RPM BT-30 Air-cooled electro-spindle, with Variable spindle speeds 3,000 - 18,000 RPM, AC Inverter, Dynamic spindle braking, Air/Oil mist lubrication. 16-Position Carousel-type automatic tool changer. Features: All Axes with Extra-large precision contour linear guideways. Closed loop AC Servo drives & Precision ground ball screws. Extended extra heavy-duty bridge for full 5' x 10 table coverage. Centralized lubrication system for all spindle & roller bearings, ball screws & guides. Operator Control: FANUC "SERIES 21i-M" Mobile CNC Control, with 10.4" Display, RS-232 Port, PCMCIA Slot, (3) Axes Simultaneous control, Manual pulse generator, Inch & Metric operation, Feed rate & Spindle speed override, Helical interpolation, Full cutter compensation, Background editing features, EIO/ISO recognition. Foot pedal control. Complete with: 2001 TRAVAINI "1-501V1A-460" 40 HP Vacuum Pump, S/N S1433, with Hour meter reading 17,003 Hrs. (10) Toolholders. Dust Manifold. Dimensions without Safety Rails: 202" x 155" x 110" H. Dimensions of Vacuum Pump: 82" x 36" x 65" H.

Shopbot CNC Router

SHOP FOX W1678 Heavy Duty 26" 2-Head Drum SanderSpecifications: -- Heavy Duty 26" 2-Head Drum Sander. -- 24" Wide thick conveyor belt, similar to the ones used with Wide Belt Sanders. -- (2) drums 6" x 27-3/4". -- Enclosed fabricated steel base with easy access doors. -- 5 HP Single-phase motor that drives both sanding drums. -- 1st Head for coarse; 2nd head for fine sanding. -- Independent adjustment on both heads. -- Variable Speed conveyor , 0.25 HP feed drive. -- 0" - 4-1/4" Thickness cap. with manual hand wheel adjustment. -- (2) Each rubber covered infeed & outfeed rollers. -- (2) Dust outlets and push button magnetic controls.

Only 40 Hrs. Run Time! Shop Fox W1812 Planer Moulder Specifications: 12" Open-sided Mini Planer/Moulder offers smooth moulding and planing. 2 HP Motor belt drives head for 7,000 RPM spindle speed. Very smooth operation with a variable feed rate of 0-18 FPM. Cutterhead Diameter 1-1/4"² Max. material width 6.75"; also planes 7.5" wide. Easily handles material thickness from 1/4" to 7-1/2" max. 9" Min. stock length; max. profile depth 3/4" and max. profile width 6-3/4". Comfortable table working height of 31". Includes: Sturdy work "stand" Front-mounted On/Off controls. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.