Moulders For Sale

Weinig Unit 318 Moulder 9" Machine 6-Head Low hours! Also available: Weinig R960 Grinder and tool room

Good Condition 230V 60Hz

Weinig Profimat 22 N Moulder Work ready

WEINIG Powermat 1000 7-Head Feed Trough Moulder(B-R-L-T-T- B-U); working cap. 9-1/16" x 4-3/4". Head sequence: -- Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 40 HP , Bottom 30 HP, and Universal 15 HP motor. All motors with electronic brakes. WEINIG Touch-Screen "Power Com" -- PowerCom Plus software system features: Profile drawing storage, profile dimensions, tool changes and production optimization. -- Electronic LED readouts for all tool holder settings, including chip breakers & pressure elements.Spindle arrangement: -- Spindle #1: 1-13/16" w/Cutterhead speed of 8,000 RPM; -- PowerLock tool holders on #2 - #5 with 12,000 RPM, universal tool holder variable from 4,000 to 12,000 RPM and with high precision bearings; -- Adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning; radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment top head; top head with independent adjustment of chip breaker & pressure element. -- Universal spindle with 270° of movement.Feed System: -- Variable feed speed from 20 - 118 FPM, 7.5 HP inverter-controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- Chromed tables and fences, (2) powered table rollers in bed and (1) between left and top spindles and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2').Equipped with: -- Pedestal for machine controls separate from the electrical cabinet, central location of lubrication points. -- The safety hood, automatic table lubrication pump, and (2) lights inside the reinforced sound enclosure are electromagnetically interlocked, as is the phone modem..

WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.

2002 Weinig U23E 5-Head Moulder 2021 Doucet MFE-150-12 Infeed System This system is still in production and ready to be loaded out.

Weinig U22N Moulder 7 head Mid 80s Freshe rebuild

1978 Weinig 7 Head Moulder S/N 2816/2248

Weinig Unimat Gold - 6-Head Machine Weinig Rondamat R960 Grinder Includes: Tooling and approx (200) profiles from tool room

WEINIG UNIMAT 10005-Head (B-R-L-T-B), 9-1/16" x 4-3/4" cap. -- Head sequence: Bottom 10 HP, right 15 HP, left 15 HP, top 25 HP and bottom 20 HP motor. -- WEINIG "Memory Re-Dial" system with storage of (100) separate profiles; electronic LED readouts for all spindles. -- Spindle dia. 1-13/16" with the following cutterhead speeds; Spindle #1 at 6,000 RPM, spindles #2 - #5 at 7,000 RPM with high precision bearings & mechanical spindle brakes; adjustment of vertical spindles 3-1/8" axially. -- Electronic LED readouts for chipbreaker & pressure elements for top spindles. -- Cutting circles 8-7/8" on spindles #2 - #5; vertical spindles with adjustable table plates to cutting circles, hardened infeed bed plates before-and-after 1st bottom head. -- Motorized feed beam adjustment; variable feed speed from 20 - 118 FPM, 10 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- (1) Powered table roller in bed at outfeed. -- Infeed straightening table 2 M (6-1/2') with adjustable fence and adjustable table at outfeed. -- Equipped with: Central location of lubrication points, side pressure roller at infeed, manual waxilit pump, and (2) lights inside sound enclosure. -- Includes Set-Up Stand.Note - Machine is in good running condition, but electric brakes are not functional, but does not affect running or performance.

WEINIG UNIMAT GOLD Feed Through Moulder6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 4-3/4".Specifications -- Spindle Configuration: 10 HP Bottom, 10 HP Right, 10 HP Left, 15 HP Top, 20 HP Top, 10 HP Bottom motor -- All Spindles are 1-1/2″ diameter; 6,800 RPM on all Spindles. -- 5.5 HP Inverter Controlled Variable Speed Feed 16 to 78 FPM; CARDAN Drive System. -- 78″ In-feed Straightening Bed -- Mechanical Digital Readouts on all Spindles -- DIGISET Readouts on Left and Top Spindles. -- Mechanical Readouts on Chip-Breaker and Pressure Element of Top Spindle; Pneumatically Pressurized Feed Rollers. -- (2) Powered Table Rollers in Machine Bed (One Between Top Spindles and One at Out-feed). -- Motorized Up/Down Adjustment of Feed Beam. -- Equipped with & Features: -- Chrome Table Plates -- Central Lubrication Point -- All Spindles Equipped with Mechanical Brakes -- Manual Waxilit Pump -- Sound & Safety Enclosure.

WEINIG - U 1000, ...Feed Through Moulder6-Head (B-R-L-T-T-B); working cap. of 9-1/16" x 4-3/4".Specifications -- Head sequence: Bottom 10 HP; right 15 HP; left 15 HP; top 25 HP; top 20HP, and bottom 20 HP motor. All spindle motors with mechanical brakes. -- WEINIG Memory Redial system allows for storage of over (200) separate profiles; electronic LED readouts for all spindles, chipbreakers and pressure elements. -- Spindle dia. of 1-13/16"; spindle #1 at 6,000 RPM, spindles #2 - #5 at 8,000 RPM with high precision bearings; adjustment of vertical spindles 3-1/8" axially. Feed: -- Motorized feed beam adjustment with independent adjustment of top head; cutting circles 8-7/8" on spindles #2 - #5. -- Variable feed speed from 20 - 118 FPM; 10 HP inverter controlled Cardan feed drive; overhead feed wheels with pneumatic pressure. -- Vertical spindles with adjustable table plates to cutting circles; hardened infeed bed plates before & after 1st bottom head. -- (1) Powered table rollers in bed at outfeed. -- Infeed straightening table 2 M (6-1/2') with adjustable fence and adjustable table at outfeed; chromed tables and fences. Central location of lubrication points; Electromagnetic interlocking of safety hood, manual WAXILIT pump. -- Complete with: Axial adjustment of feed roller opposite left spindle and (1) light inside sound enclosure; all setup tools, manuals and spacers.

WEINIG P-22 Feed Through Moulder5-Head WEING Molder with a working cap. 9-1/16" x 4-3/4".Head sequence: -- Bottom 10 HP, right/left 10 HP, top 15 HP, and bottom 10 HP motor. -- Spindle dia. 1-1/2" with cutterhead speed of 6,000 RPM; mechanical spindle brakes all spindles. -- Mechanical digital readouts on all spindles; Digiset readouts on left & top spindles; mechanical readouts on chipbreaker & pressure elements of top spindles.Feed: -- Controlled feed speed from 16 - 78 FPM, 5.5 HP feed drive. -- Infeed straightening table 2 M (6-1/2"), fences, side holdover roller mounted to infeed table, manual Waxilit pump.Features: Reduced distance feed roller, protection against backlash when splitting, central location of lubrication points, and sound/safety enclosure. -- It comes with a large assortments of cutter heads 9 inch - 2 inch approximately (30) and it includes a lot of different knives for each of the heads

WEINIG HYDROMAT H 1000 MOULDER (FEED THROUGH):5-Head (B-R-L-T-B), working cap. 9-1/16" x 6-5/16" capacity. -- WEINIG H 1000 spindle sequence: Bottom 15 HP, right 10 HP, left 10 HP, top 20 HP, and bottom 15 HP motor. -- Spindles: Dia. of 1-13/16" with cutter-head speeds of first head 6,000 RPM, 2,3,4,5, at 8,000 RPMs; mechanical digital readouts on all spindle adjustments. Pneumatic pressure elements on left & top head chip-breakers. -- Feed drive, variable feed speed from 20 - 120 FPM, all feed wheels driven and with pneumatic pressure. -- Central lubrication, automatic table lubrication pump, machine prepped for lateral feeder, sound enclosure, safety hood with (1) inside lights.

WEINIG PROFIMAT 23E Moulder Feed Through;6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16". -- Head sequence: Bottom 20 HP, right & left by 20 HP, top 20 HP, top 20 HP and bottom 15 HP motor. -- Spindles; Dia.1-13/16" with cutterhead speed of 6,000 RPM; Digiset readouts for left and top spindles, mechanical readouts all other spindles including chipbreaker and pressure element. -- Feed System: Feed motor 5 HP, variable speed of 20 - 78 FPM. One(1) powered feed roller at outfeed end on the machine. Infeed: Straightening 2 M (6'6") table, side pressure roller mounted to infeed table. -- Features: Central lubrication system, table inserts for right/left vertical spindles and manual Waxilit pump. -- Full sound and safety enclosure, operator/spare parts manuals with (1) set of heads.

Weinig Unimat 22AL Electrical Panel

Model 206 For smooth moulding and planing; (1) 2 HP Baldor motor, 7,000 RPM spindle speed, variable feed rate of 1 - 19 FPM includes "Deluxe" variable feed control with magnetic drop out switch and cords. Built in Multi-Pass system and Guide sytem -- Capacity: Max. material width 7", material thickness from 3/4" to 8" max., min. 9" stock length. Max. profile depth 3/4" and max. profile width 6-3/4", planes 7" wide and can do a 7" radius with optional jig; working height 31", overall height 45", overall width 20". -- Includes: Table guides, dust hood, belt, pulley, planing knives, welded steel stand, custom moulding catalog, oil, and operator's manual. -- With OPTIONAL accessories like the elliptical jig you can make arches and elliptical mouldings, please add...$ 700. Also available in 115/1/60 and 230/460V/3/60. Weight: Approx. 242 Lbs.

Manufacturer’s Soecification Feed Type:0-19 fpm, variable feed Motor:2 HP (3450 rpm) Voltage:240V Maximum Profile Depth ¾ inMinimum Stock Length 9 inMaximum Profile Width 6 ¾ inMinimum Stock Thickness ¼ in Maximum Height Above Final Cut 3/16 in Maximum Stock Thickness 8 in Planes 7 in WideOverall Machine Dimensions:28 inL x 22 inW x 50 inHWorking Height:35 in

Woodtech Heavy Duty Moulder Models: WTM-330 – 12” wide 6 head configurations. Electrical Requirements: Operating voltage: 460 Volt/60Hz/3 Phase Features Available: Outboard bearings Pneumatic hold-downs Side pressure PLC controlled LCD readout Heavy duty drive motorsBelt driven spindlesAuto Lubrication Optional: Automatic Infeed Table 7000 RPM 1st Spindle - 15 HP 2nd Spindle - 15HP 3rd Spindle - 15HP 4thSpindle - 255HP 5th Spindle - 25HP 6th Spindle - 15HP 480V 3Phase Schneider Electronics

Woodtech Heavy Duty Moulder Models: WTM-330 – 12” wide – available in 4, 5 or 6 head configurations.WTM-260- 10” wide – available in 4, 5 or 6 head configurations. WTM-230 – 9” wide – available in 4, 5 or 6 head configurations.WTM-200 – 7” wide – available in 4, 5 or 6 head configurations. Electrical Requirements: Operating voltage: 460 Volt/60Hz/3 Phase Features Available: Outboard bearings on WTM-330 Pneumatic hold-downs, and side pressurePLC controlled – LCD readout Heavy duty drive motorsBelt driven spindlesAuto Lubrication Optional: Automatic Infeed Table 7000 RPM 1st Spindle - 15 HP 2nd Spindle - 15HP 3rd Spindle - 15HP 4thSpindle - 255HP 5th Spindle - 25HP 6th Spindle - 15HP 480V 3Phase Schneider Electronics