Woodworking Equipment For Sale

Only 697 hours, taken from service (2) top heads - one orbit, one brush (1) 3HP main orbit motor (1) 3HP feed motor (1) 1HP brush motor (1) 1HP oscillation motor 460V Max. stock width 36" Max. thickness 6" 32-38" variable passline height 2,000 CFM @ 5,000 FPM exhaust air requirements

Timesavers 43" Speedsander Single Phase Machine

Timesavers Single Head Sander Combination Head Model 2311-45-6 Includes transformer

Timesavers Model 2331-04-334 3-Head Orbital Sander 43" Machine

TIMESAVERS 4331-45-001 Wide belt sander (3) heads 51" width cap. 1st Head 9-1/2" Dia. rubber covered (60-65 Duro) 40HP motor 2nd Head 9-1/2"Dia. rubber covered (60-65 Duro) 30HP motor 3rd Head Combination head with 6" dia rubber covered contact roll and a 2-1/2" finishing platen. 30HP motor. 52" x 103" abrasive belts with dual "posi-trac" electronic-solid state tracking Controls mounted on belt loading side Conveyor feed belt replaced (2) years ago.

Timesavers Model 2321-24-01 Sander 43"x75" Belts 2-Head IceClean System on each head

Timesavers 2311-24-6 Pro V.42″ Segmented Platen, Wide Belt Sander42″ Segmented Platen, Specifications: -- 3,273 hours. So it is not a high hour machine. -- 42″ width X 4.75″ (120 mm) thickness capacity. -- Controlled via an easy to use touchscreen. -- Stores up to 240 Programs. --Font drum is a 5″ helically grooved rubber drum that is pneumatically actuated from the control panel. -- The head has variable speeds from 275-1,150 RPM. -- The platen is segmented and there is NEW graphite on the platen.Equipped with & Features -- Both the platen and head have dial indicators for fast, easy, accurate control over adjustments. -- Rear of the machine you will find dust sweeps. -- Up top you will also find a pneumatic air wand for abrasive cleaning. -- Cleaning brush. -- On the front center of the machine you will find an auto calibrating unit. -- The vacuum bed has a 15 hp blower with an almost NEW feed mat. -- The feed mat is driven by a 2 hp motor that is VFD controlled allowing for 12-45 FPM.

Timesaver 2331-45-006 (3) Head Wide Belt Sander;52" Width cap , Drum, Drum, Combination HeadHead configuration 1st Head: 30 HP motor, 8" dia. rubber covered serrated drum with 65 / 70 duro.2nd Head: 25 HP motor, 8"dia rubber covered serrated drum with 65 / 70 duro.3rd Head: 25 HP motor, segmented combination, drum/platen 5-1/2" dia. drum also with 65 / 70 duro drum and a 2-1/2" platen;Specification -- 3rd head has abrasive belt air jet blow off. -- Variable feed 15 / 45 FPM; -- Double in-feed and out-feed rubber covered hold-down rolls.Equipped with & Features -- Star Delta starters on all heads; disc brakes on main motors. -- In-feed stop bar, motorized bed table lift -- PLC controller with HMI interface, electronic abrasive belt tracking. -- This is not a constant pass line sanderNote from Seller: 1800 Hours! We are the 2nd owner of the unit. Well maintained by original owner and purchased by us in 2022. At that time the machine was inspected an by original owner and purchased by us in 2022. At that time the setup and all adjustments done by TS tech

TIMESAVERS 2331-04-334 DUAL HEAD DENIBBING SANDER2-Head, 42" width capacity Sanding / Denibbing system. -- (2) 5" Wide platens featuring a "dual" action head with a high speed orbital movement and combined back & forth oscillation to remove abrasive belt crossgrain scratches; platens designed with a quick change system for abrasive material. -- (1) Nylon abrasive impregnated (150 grit) Cleaning / De-Nibbing brush, 10" dia., drive unit for brush rotation, brush wear adjustment via jack screws. -- Vacuum holddown conveyor system with variable feed speed 5 - 15 FPM. -- Double infeed and outfeed holddown pinch rollers. -- Power raisng and lowering of the conveyor bed with AUTO-SET feature, 0" to 6" part thickness capacity. (4) DUFF-NORTON acme screw jacks under conveyor bed, 36" infeed conveyor area.

TiMESAVERS - 237-KA IC, ...Planer Sander w/2-HEADs 2-Head Planer Sander Combination; 37" width capacity.Head Configuration: -- 1st Head. 7" Dia. Helical "Quiet Cut" planer head with: (6) Spirals of 4-sided carbide inserts with 15° rake angle; head turns @ 3,200 RPM; head adjustment with dial indicator readout; 30 HP motor. -- 2nd Head. Combination Sanding head with: 6" Dia. contact roll (60 - 65 Duro) and 2-1/2" wide finishing platen; 25 HP motor; sanding head with: 37" x 75" abrasive belt with "POSI-TRAK" electronic tracking.Feed System: -- Variable feed speed 15 - 45 FPM; automatic conveyor belt tracking; 3-ply rough top conveyor belt. -- Anti-kickback fingers on infeed; air loaded sectional shoe with dial indicator adjustment; double grooved pinch roll on infeed of knife head. -- Infeed & outfeed pinch rolls on sanding head; air activated caliper disc brakes on all heads. -- Motorized part thickness adjustment of 0" - 6" with digital readout.Complete with: -- Controls mounted on belt loading side; main motor fuse protection on both heads; load meters for each head; "over thick" shutoff system; 24" infeed conveyor extension.

TIMESAVERS 137-2HD Double Head, 36" Wide Belt Sander. 2-Head, 36" width cap.Specifications: -- 1st Head: 6" Dia. rubber-covered contact roll, 25 HP motor; -- 2nd Head: 2-1/2" Wide finishing platen, 15 HP motor. -- 37" x 60" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, 15 - 45 FPM variable feed speed. Equipped with: -- Double infeed & outfeed spring loaded holddown rolls, 0" - 8" max. manual part thickness opening with mechanical digital readout, air-operated disc brakes, motor load meters. -- 21" Infeed conveyor extension, and infeed emergency stop. -- Includes: (1) Extra rubber covered roll, (1) pipe, (1) Elec. disconnect.

Timesavers 2321-45-01 (2) Head wide Belt Sander51" Width cap, Drum, Combination HeadHead Configuration1st Head: Steel contact roll, 8" dia., 30 HP motor.2nd Head: Combination head with a rubber-covered contact roll 5-1/2" dia. and 2-1/2" wide segmented finishing platen, 25 HP motor, (2) dial indicators for contact roll height adjustment.Specifications : 52" x 103" Abrasive belts, -- "Posi-Trak" electronic tracking & pneumatic tensioning, conveyor belt feed. -- 15 - 45 FPM Variable feed speed with inverter control, -- Automatic conveyor belt tracking; -- Double in-feed & out-feed spring loaded hold-down rolls.Equipped with & Features -- 0" - 5" Max. motorized part thickness opening with automatic part thickness set-up, -- Air operated disc brakes, -- Motor load meters, -- 14" in-feed conveyor area, -- In-feed emergency stop bar."Owner's manual included

TIMESAVER 1321-14-01 43" Wide Belt Sander (2) Heads:43" width cap., drum, combination head.Head Configuration:1st Head: Rubber covered contact roll, 8" dia. with dial indicator heigth adjustment, 20 HP motor.2nd Head: Combination head with a rubber covered contact roll 3-3/8" dia. and 2-1/2" wide finishing platen, 15 HP motor.Specifications: -- Abrasive belt size: 43" x 60" -- Main motors: 20HP & 15HP -- Maximum width stock: 42" -- Minimum part length: 13" -- Maximum thickness opening: 5" -- Feed speed: 15-45 FPM -- Passline height: 33-38" -- Dust extraction: 2000 CFM (5" static pressure) -- Compressed air usage: 4 CFM @ 90 psiEquipped with & Features -- Four Jack Bed Construction -- Dual Infeed and Dual Outfeed Holddown Rolls --Air Operated Disc Brakes -- Centralized Control Panel -- Infeed Stop Bar -- Hour Meter -- Main Motor Percentage Load Meters -- Electronic Go-To Device -- Motorized Thickness Adjustment -- Through-Beam Abrasive Belt Tracking -- Quick Release Outboard Support -- Variable Speed Conveyor Drive

TIMESAVERS 150-1v Wide Belt Sander;1-Head, 50" width cap.; contact roll head with 40 HP motor; 50" x 103" abrasive belt size, air tracking, 2-1/2" max. thickness cap., adjusted by scale; variable feed speed 40 to 100 FPM; incl. in- & outfeed extension. -- Used to have a checkrail edge sanding attachment for sanding sash (no longer available), but includes (1) extra set of new conveyor belts.

TIMESAVER 237-3 IC Wide Belt Sander: 3-Head, 36" cap. - Drum, Drum, Finishing Platen. -- 1st Head: Rubber covered contact roll, 11-1/2" dia., 50 HP motor; -- 2nd Head: Finishing platen 2-1/2" 30 HP motor. -- 3rd Head: Finishing platen 2-1/2" wide, 30 HP motor. Specifications: -- 37" x 75" Abrasive belts. -- "POSI-TRAK" electronic sanding belt tracking. -- Motorized part thickness adjustment. -- 0" - 6" Opening, automatic part thickness adjustment. -- Infeed & outfeed spring loaded holddown shoes. -- Variable feed speed from 15 - 45 FPM, 5 HP feed motor.Additional Features: -- Motor load meters. -- Infeed emergency stop bar. -- Controls mounted on belt loading side. , -- Disc brakes on sanding head motors. -- 30" Infeed load area.Actual model: TIMESAVERS "237-3IC"

TIMESAVERS 137-1 SINGLE HEAD WIDE BELT SANDERSpecifications: -- 36" Width capacity, combination sanding head with 6" dia. spiral grooved rubber contact roll. -- 1-1/2" Wide adjustable height polishing platen on slide out assembly. -- 37" x 60" Abrasive belt size.Equipped with: -- 20 HP Main motor, -- Electric eye abrasive belt tracking, and limit switch monitoring. -- 1 HP feed motor with a fixed speed of 30FPM. -- 0" - 8" manual part thickness opening of conveyor bed. -- Double infeed & outfeed rubber covered holddown rollers. Complete with: -- 18" Infeed conveyor extension, motor load meter, and safety stop bar.

Dust Collection System

Reconditioned Torit 156RF10 baghouse

TORREDA TORMADEX S.A. PA-1200 Hydraulic Wood Turning Back Knife Lathe:Nicely equipped Spanish lathe with dual hydraulic tracers for making quick work of all your demanding woodturning production runs! ... Great for turning baseball bats!Specifications: -- 47" Max. between centers, 9-7/8" max. dia. without traveling steady. -- 3-1/3" Max. dia. through steady rest (larger dia. of 6.2" cap. OPTIONAL); -- High speed automatic loading, feeder accepts pieces up to 4" square. -- 4 HP Motor with (4) turning speeds, 1,200, 2,800, 3,500, and 4,550 RPM. -- (2) HIDRO "T-75" hydraulic reproducing heads with 3" stroke. -- (2) Top mounted hydraulic knives for tenon or pattern cutting (accepts form tools up to 3" wide). -- 2 HP Hydraulic pump motor with (3) carriage feed speeds. -- Features: Pressure sensitive Hydraulic tailstock with Pressure Regulating Valve needed for small, slender turnings to avoid buckling. Pre-rounding tool in front of travelling steady rest. -- Includes: Safety guard, tooling with several roughing and finishing knives.

TORREDA METOR 1600 UNIVERSAL Copy Lathe; -- Specifications: 63" (1,600 mm) Max. between centers, 9-7/8" (250 mm) max. dia. without traveling steady, 3-1/2" (90 mm) max. dia. through steady rest (larger dia. of 6-1/4" (160 mm) cap. OPTIONAL). -- Equipped with: 4 HP Motor with adjustable turning speeds, (1) HYDRO hydraulic tracing head with 3" stroke, hydraulic controlled tailstock. -- (2) Top mounted manual knives for tenon or cutting using form tools (accepts form tools up to 3" wide); 2 HP hydraulic pump motor with adjustable feed speeds. -- Actual model is HIDRO 80/12 mm. -- Includes matching knife grinder and accessories as pictured