Woodworking Equipment For Sale

Gently used Powermatic planer for sale. Call 800-459-2148 for more info.

POWERMATIC 28 SHAPER1-1/4" Dia. spindle, 7.5 HP - 3,600 RPM motor; with 3,300 to 9500 RPM spindle speeds via Factory installed Variable frequency Drive. 4-3/4" Cap. under nut when using the 1-1/4" spindle, spindle brake, 30" x 39" table.

Powermatic Model 100 12" Planer 3 Phase power

1 HP tenoner Approx. 2HPsaw Approx 28" x 16" table

Powermatic Model 221 Planer

Powermatic OES9138 Oscillating Edge Sander Includes: (5) Sander belts

POWERMATIC WB-25 WIDE BELT SANDER1-Head, 25" width capacity, 1/8" to 6" thickness capacity. Combination sanding head with 4" dia. rubber covered contact roll & 2" wide polishing platen, micro-adjust platen. steel abrasive belt tension roll and steel idler roll. 25" X 75 abrasive belt capacity. Equipped with: -- 15 HP Three-phase main motor, 1 HP variable feed motor, 15-49 FPM. -- 1/4 HP table raising and lowering motor with Auto adjust thickness assist, 1/8" to 6" opening with (4) screw jacks. -- Double infeed & outfeed rubber covered holddown rolls. -- Complete with: -- Digital readout, air eye belt sensing, limit switch overtravel protection, magnetic starter, overload protection, load meter and emergency brake; includes owner's manual & parts list.

TABLE SAW TOP MEASURES 44" WIDE X 76 ½" LONG TABLE HEIGHT FROM FLOOR 34% " COMES WITH 5 - 12" DADO BLADES 1 HORSE POWER POWERMATIC MATERIAL FEEDER 5 HORSE POWER SAW ARBOR MOTOR 440 VOLT 3 PHASE

POWERMATIC RB-37 SINGLE HEAD WIDE BELT SANDER1-Head, 36" width cap., combination sanding head with 4" dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size 37" x 60", with air tensioning, air jet abrasive belt tracking; 1 HP feed drive, variable feed speed of 15 - 30 FPM conveyor speed, 0" to 5-1/4" opening with (4) screw jacks, double infeed & outfeed rubber covered holddown rolls. -- Complete with: Magnetic starter, overload protection, load meter and emergency brake.

20" Dia. dynamically balanced aluminum disc, 3 HP - 1,740 RPM direct drive motor; 15" x 27-1/4" table w/miter gage slot, tilts 30° upward & lowers 45° downward, 90° positive table stop; rack mechanism for raising & lowering table by hand crank, heavy bolt-down steel base. Complete with reversing switch and miter gauge. Also available in Single-phase in 2 HP motor.

POWERMATIC MODEL 100 PLANER12" Cap., 5 HP 5,300 RPM belt driven main motor, 1/16" to 5" thickness opening, 3-1/8" dia. 3-knife cutterhead with high speed steel knives, 18 FPM fixed feed speed with in-out clutch -- Corregated infeed rolls; 12" x 24" precision ground cast iron table. 1/4" max. depth of cut, 7-1/2" min. stock length (unbutted). -- Complete with: Knife grinder, Magnetic controls, cutterhead guard with dust chute on enclosed steel stand.

Producto Gothic Fence & Post Picket Machine. Out and Ready to ship. Producto is now Global Marketing Group.

PROFILEMATIC 503 PROFILE SANDER3-Head feed through, sands from top at adjustable angles narrow moulding type parts as well profiled edges on panels.Equipped with: -- (3) Top VPS vibrating air-loaded sanding units, 0.5 HP vibrating motor ea., sanding heads have (2) pneumatic cylinders for sanding pressure control and oscillate with 1/2" stroke on dust-protected round guides, variable vibration speed from 200 - 1,800 RPM; adjustment range of 120ø to conform to profile, equipped with air shower to clean workpiece & sandpaper automatically. -- Part transport is achieved by a 4-1/2" wide linatex coated conveyor belt system, "quick adjustment" holddown wheels & fence system, variable feed speed 0 - 35 FPM powered by a 0.25 HP DC gear drive (forward & reverse feed mode). -- Each sanding head with its own controls for manual raise & lower, pressure control and vibrating speed. Profile width approx. 1/2" min. to 4" max., material feed through thickness up to 5"; support fences for up to 10" moulding width.

2 HP motor,220V, 3 PH, 60 HZ -- V-belt drive, Allen Bradley push button overload control. -- Seller recommends replacing rubbers & covers.

Progressive Systems Inc End Matcher

PROSAND HF-412 Curved Part Belt SanderBelt oscillates up and down.÷Feed wheel removable.

PUTSCH EBP 950PMCR EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge material thickness 0.4 - 3 mm coil & up to 5 mm strips.Min./max. panel thickness "all units" 8 - 50 mm (0.39" - 1.97"). Max. material thickness when using CR unit is 1.77" (45 mm). Min. panel width: 95 mm (3.7") & 110 mm (4.3") min. length.Fixed feed speed of 9 MPM (29.5 FPM).Equipped with: -- Automatic coil feed magazine with an oscillatory cutting shear for uninterrupted edge feed. -- Gluing Unit: Teflon coated glue tank, approx. 10-minute heat-up time. -- Side Pressure Unit: 3-roll pressure unit w/1st roller power driven via clutch with pneumatic in & out positioning, (2) idler rollers.Workstations: -- Pre-Milling Unit: (2) 2.0 HP (1.5 kW) motors with (2) opposing 60 mm diamond cutters that are micro-adjustable to mill up to 2 mm from the panel edge for optimal, chip-free glue application. -- End Trimming Unit:(1) 0.3 HP (0.2 kW) - 12,000 RPM Motor, automatic single motor end trim unit with (2) 80 mm blades. -- Top & Bottom Trimming Unit: (2) 0.5 HP (0.37 kW) - 12,000 RPM ea. Motor with 75 mm cutters (with disposable knives) that offer a straight 2 mm radius / 15° bevel.The flush trim unit also includes 120 mm scratch-resistant vertical disc copiers that are ideal for delicate finishes. -- Corner Rounding Unit: NOTE: When using CR unit, the max. material thickness is 1.77" (45 mm) & min. panel length is 7.78" (200 mm).(1) 0.3 HP (0.2 kW) - 12,000 RPM Single motor Corner Rounding unit for leading & trailing edges. The corner rounding unit is fixed to the frame crossbeam on double linear guides and features 50 mm cutter blocks, as well as vertical/horizontal 50 mm diameter copiers for profiling straight, curved, and beveled edges. -- Edge Scraping Unit: Top & Bottom PVC Scraper for up to 3 mm radius, complete with 3 mm scrape shaving collection box. Programmable, pneumatic exclusion on/off. -- Buffing Unit:Top & bottom buffing unit (2 x 0.2 HP - 1,400 RPM motor each), tilting range 8°.Controller: "ETOUCH" Touch Screen Control for the "EBP 950" Series; the ETOUCH touch screen control is a 7-inch color programmable display.Operators can store up to (99) working programs and connect to an optional network to read statistical data, diagnostic messages and online updates.The Control permits the operator to engage or disable specific work operations, while also providing immediate access to diagnostic messages and statistical data such as hours of operation and length of coil used.Complete with:Track Drive Chain feed speed 9 MPM (29.5 FPM).(2) Rows of upper pressure wheels in holddown beam.Adjustable material support outrigger.Sound & Safety Hoods.Used Tooling -- Actual Model is PUTSCH EBP 950PMCR.

CASADEI (PUTSCH-BRANDED) EBP 420 PMVR Compact Edgebander – New, Never Used!Specifications: -- Edgebanding thickness: 0.4 - 3 mm (0.02" - 0.12") Coil, 0.4 - 5 mm (0.02" - 0.20") Strip with Manual Feed. -- Max. coil dia. 800 mm (31.50"). -- Panel thickness 8 - 45 mm (0.31" - 1.77"), Min. panel width 95 mm (3.74"), Min. panel length 210 mm (8.27"). -- Feed speed 7 MPM (22 FPM).Equipped with: -- Pre-mill unit, with (2) 0.75 kW (1 HP) - 12,000 RPM - 200 Hz Motors, Counter-rotation, Max. milling adjustment 2 mm (0.08"), & Dedicated extraction system with Blower. -- Anti-adherence spraying unit, with PLC-Controlled spray function, Lower & Upper Sprayer, and Liquid tank. -- 1 kg (2.2 Lbs.) Cap. Teflon-coated glue pot, with (6) Heating elements, & Thermostatic glue control with Automatic standby & Temperature display. -- Pneumatically-operated guillotine. -- Pressure section. -- Feed chain pads, with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers. -- PLC Control, with Backlit LCD display & Touchpad. -- Safety enclosure.Workstations: -- VR Front & Rear End Trim Unit, with 0.22 kW (0.3 HP) - 2,700 RPM Motor, Vertical rounding function, & (2) Processing modes: Straight (thin edges & wooden strips) & Radius (ABS & PVC thick edges). -- Top & Bottom Flush Trim Unit, with (2) 0.22 kW (0.3 HP) - 12,000 RPM - 200 Hz Motors, 75 mm (2.95") Dia. Cutterheads, & 2 - 3 mm (0.08" - .012") Radii. -- Edge Scraping Unit, with Box. -- Top & Bottom Scraping Unit (Flush Trim Unit), with 120 mm (4.72") Vertical disc copier. NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-320 Compact Edgebander – New, Never Used! – 3-PhaseSpecifications: -- Edgebanding thickness 0.4 to 2 mm (0.02" - 0.08"). -- Max. coil dia. 600 mm (23.62"). -- Panel thickness 10 - 45 mm (0.39" - 1.77"), Min. panel width 110 mm (4.33"), Min. panel length 220 mm (8.66"). -- Feed speed 7 MPM (22 FPM).Equipped with: -- 3-Position Infeed fence, 0 mm, 1 mm, & 2 mm. -- 1 kg (2.2 Lbs.) Cap. Teflon-coated glue pot, (6) Heating elements, & Thermostatic glue control with Automatic standby & Temperature display. -- Pneumatic guillotine. -- Pressure section, (1) Silicone roll & (2) Nylon rolls. -- 0.8 HP Feed belt motor. -- PLC Control, with Backlit LCD display & Touchpad. -- Sound enclosure, Outrigger panel support.Workstations: -- Front & Rear End Trim Unit. -- Top & Bottom Flush Trim Unit, with (2) 0.37" kW (1/2 HP) - 10,300 RPM Motors, Straight or Bevel cutters, & 75 mm (2.95") Dia. Cutterheads with Knife inserts for 2 mm (0.08") Radius or 15° Bevel.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-320 Compact Edgebander – New, Never Used! – 3-PhaseSpecifications: -- Edgebanding thickness 0.4 to 2 mm (0.02" - 0.08"). -- Max. coil dia. 600 mm (23.62"). -- Panel thickness 10 - 45 mm (0.39" - 1.77"), Min. panel width 110 mm (4.33"), Min. panel length 220 mm (8.66"). -- Feed speed 7 MPM (22 FPM).Equipped with: -- 3-Position Infeed fence, 0 mm, 1 mm, & 2 mm. -- 1 kg (2.2 Lbs.) Cap. Teflon-coated glue pot, (6) Heating elements, & Thermostatic glue control with Automatic standby & Temperature display. -- Pneumatic guillotine. -- Pressure section, (1) Silicone roll & (2) Nylon rolls. -- 0.8 HP Feed belt motor. -- PLC Control, with Backlit LCD display & Touchpad. -- Sound enclosure, Outrigger panel support.Workstations: -- Front & Rear End Trim Unit. -- Top & Bottom Flush Trim Unit, with (2) 0.37" kW (1/2 HP) - 10,300 RPM Motors, Straight or Bevel cutters, & 75 mm (2.95") Dia. Cutterheads with Knife inserts for 2 mm (0.08") Radius or 15° Bevel.NOTE: Sold "As-Is" Without Warranty!