Woodworking Equipment For Sale

10' Sorting Table MATERIAL HANDLING BUFFER FOR DECKBOARDS VARIABLE SPEED CONTROLLER FOR TURN SPEED CHAIN/SPROCKET DRIVEN SHAFT 3 HP 3 PHASE MOTOR WITH GEAR REDUCTION 3/8" STEEL TABLE TOP BOLTS TOGETHER

100 Cu-Ft. Stainless Steel Double Ribbon Blender with Motor U-Shaped Trough with Additional Extended Top, Grate & Cover. Chain-Driven Motor w/Safety Cage Inside Dimensions: 3'W x 9'L x 4' Deep Last used to blend 2400 lbs. of light powdered product Will hold 4500 lbs. of product!

T Jamb Table

This Triangle Packaging Cartoner is in good working/running condition the seller has confirmed and this is ready to load! - 5HP - 64RPM - Continuous motion - Carton size range: - 3" to 13" in length - 1.5" to 8" in width - 7.5" to 18.5" in depth - Nordson Glue system - Touchscreen interface

Panel Flipper 5 X 10

Holds 2 std 48x40 pallets in each rack 1400 Ft long 20 Ft High May be able to be split up into smaller sections

Arrow Pneumatics model; B-225-2, 230 volts, 225 scfm's, working condition

12" Straight Line Rip Saw, with LaserSpecifications: -- Overall table size 35-1/4"; x 59"; x 32-1/2"; H. -- Throat 14-1/2". -- Distance from front of blade to table 20-1/2". -- Max. blade dia. 12". -- Max. thickness 2-1/2".Equipped with: -- 10 HP - 1,720 RPM - 230/460 V Dual voltage blade motor. -- 5" W Pyramid corrugated feed chain, with 1 HP Motor. -- 17-3/4"; L x 1-1/2"; H Fence. -- Upper anti-kickback fingers.Complete with: -- LASIC "KML-8305 TC" 5 mW Class IIIA Temperature-Controlled Red Laser Line Projector, with Wavelength 630 - 650 nm, Max. projection distance 4 M (13'), Line length 3 - 4 m (10' - 13'), & Max. line thickness 1.5 mm (0.06").

Planer with Electric Drive, 12" Max Width Capacity. Dimensions: 6'x10'x5' tall

Spray booths - (3) Available Approx 15'x12'

Moulder Heads, Spindles, Knives.

64 ft long 33.5 inch wide 30 in rollers

Uknown Chop Saw End Feed Table

Center Split Saw with Infeed, Outfeed, Air Knock Off. 75HP Motor.

7' Planer Infeed Roller Table with Cork Screw Rollers

9ft Planer Infeed Table Pineapple rolls

8' Pineapple Infeed Roller Table

US CONCEPTS CHB 12 HauncherThe CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 12". (Also available in 16" & 20" capacities) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 36" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

US CONCEPTS CHB-16 HauncherThe CHB-16 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 16". (Also available in 20" capacity) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 42" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

US CONCEPTS CRD-300, ...CNC Handrail Borer. Fully Automatic Model CSR-300.CNC Drill used for drilling of handrails and plates (optional) is designed to operate with speed, precision, and minimal setup time.No CNC experience is needed. All the operator has to do is enter the distance of the 1st hole to the end of rail, baluster spacing, number of holes, rake angle, insert rail (or plate), and press the Start button. -- As the machine takes over, the high-speed router motor drills the hole with plunging bit and Servo-actuator advances material until all holes are finished. -- It takes roughly (3) Sec. per hole in level or rake rail. Factory developed technology for your benefit.Standard Features & Specifications: -- Heavy Duty fabricated construction -- PLC Control with Touch-Screen input -- Automatic board advance every cycle -- 3 HP Router motor with 18,000 RPM max. speed; ER25 router bit collet (1 supplied) -- 2-3/4" Max. handrail width; 2-3/8" handrail height; Colonial 6010 standard handrail -- 2" - 16" Programmable distance to the end to 1st baluster; 2" - 6-1/2" baluster spacing -- 0° - 45° Rake AngleDimensionsOptions & Additional Features: -- 5 HP Router motor, please add ...$ 560. -- Plate drilling option (6"; to 8"; x 3/4";), add ...$ 3,240. -- Hood covering the work area, add ...$ 2,120. -- Programmable distance from end to 1st hole more than 18";, RFQ. -- Other Rail style or size, RFQ. -- ER25 Collet, add ...$ 36 -- Factory Setup and training, add ...$ 800/Day + Expenses. -- Crating, add $ 360. -- Export crating as per ISPM-15, add ...$ 1,280.The CRS-300 Automatic Handrail Drilling Machine makes a huge impact in day to day operation of stair building; cost of mistakes are down, shop labor is decreased, and productivity & quality goes up significantly.