Sanders For Sale

TIMESAVERS - 237-2, ...2-Head Wide Belt Sander36" Width capacity; Drum, Drum.Head Configuration:1st Head: Steel contact roll, 9-1/2" dia., 25 HP motor.2nd Head: Rubber covered roll, 9-1/2" dia., 20 HP motor.Specifications: -- 37" x 75" Abrasive belts. -- Motorized part thickness adjustment with mechanical digital readout, 0" - 6" opening. -- Infeed & outfeed spring-loaded holddown rolls and shoes. -- 15 - 45 FPM Variable feed speed. Equipped with & Features: -- Motor load meters. -- Infeed emergency stop bar. -- Disc brakes on sanding head motors. -- 24" Infeed load area.

TIMESAVERS 2321-23-1 Wide Belt Sander, (2) Heads37" Width capacity, Drum and Combination Drum/Platen HeadHead Configuration:1st Head: Rubber contact roll, 25 HP motor (8"; diameter 70 shore rubber grooved contact roller)2nd Head: Combination head with a rubber covered contact roll 5-1/2" dia. and 2-1/2" wide polishing platen Specifications: -- 37" x 75" Abrasive belts. -- "Posi-Trak" electronic tracking & pneumatic tensioning. -- 15 - 45 FPM Variable feed speed with inverter control. -- Automatic conveyor belt tracking. -- Double infeed & outfeed spring loaded holddown rolls. -- 0" - 5" Max. motorized part thickness opening with automatic part thickness set-up, -- Air operated disc brakes and Motor load meters, -- 14" Infeed conveyor area, and infeed emergency stop bar.Equipped with & Features -- Quick release outboard support. -- Four bed jacks. -- Digital thickness readout. -- Centralized control panel.

2-Head, 42" width capacity Sanding / Denibbing system. -- (2) 5" Wide platens featuring a "dual" action head with a high speed orbital movement and combined back & forth oscillation to remove abrasive belt crossgrain scratches; platens designed with a quick change system for abrasive material. -- (1) Nylon abrasive impregnated (150 grit) Cleaning / De-Nibbing brush, 10" dia., drive unit for brush rotation, brush wear adjustment via jack screws. -- Vacuum holddown conveyor system with variable feed speed 5 - 15 FPM. -- Double infeed and outfeed holddown pinch rollers. -- Power raisng and lowering of the conveyor bed with AUTO-SET feature, 0" to 6" part thickness capacity. (4) DUFF-NORTON acme screw jacks under conveyor bed, 36" infeed conveyor area.

TIMESAVERS - 352 HDA, ...Abrasive Planer/Sander2-Head, 51" width cap. Heavy Duty Sander. -- 1st Head: Smooth steel contact roll, 11-1/2" dia., 75 HP motor. -- 2nd Head: Spiral Grooved hard rubber contact roll (11-1/2" dia.) , 75 HP motor; 52" x 103" abrasive belts (6,300 & 4,300 SFPM) with POSI-TRAK electronic tracking. Equipped with: -- Heavy-Duty solid rubber (no vacuum holddown) feed belt for Heavy-Duty operation. -- Motorized part thickness adjustment, 0" - 6" opening. -- 38" - 32" Conveyor height passline with MITUTOYO LED readout, conveyor belt feed. -- 5 HP Variable feed speed from 20 - 60 FPM, smooth rubber conveyor belt. -- Infeed & outfeed spring loaded holddown shoes, infeed emergency stop bar, anti-kickback fingers on infeed. -- Disc brakes on sanding head motors, 18" infeed load area, and motor load meters on sanding heads.

TIMESAVER 1321-14-01 43" Wide Belt Sander (2) Heads:43" width cap., drum, combination head.Head Configuration:1st Head: Rubber covered contact roll, 8" dia. with dial indicator heigth adjustment, 20 HP motor.2nd Head: Combination head with a rubber covered contact roll 3-3/8" dia. and 2-1/2" wide finishing platen, 15 HP motor.Specifications: -- Abrasive belt size: 43" x 60" -- Main motors: 20HP & 15HP -- Maximum width stock: 42" -- Minimum part length: 13" -- Maximum thickness opening: 5" -- Feed speed: 15-45 FPM -- Passline height: 33-38" -- Dust extraction: 2000 CFM (5" static pressure) -- Compressed air usage: 4 CFM @ 90 psiEquipped with & Features -- Four Jack Bed Construction -- Dual Infeed and Dual Outfeed Holddown Rolls --Air Operated Disc Brakes -- Centralized Control PanelInfeed Stop Bar -- Hour Meter -- Main Motor Percentage Load Meters -- Electronic Go-To Device -- Motorized Thickness Adjustment -- Through-Beam Abrasive Belt Tracking -- Quick Release Outboard Support -- Variable Speed Conveyor Drive

Timesavers Single Head Sander Combination Head Model 2311-45-6 Includes transformer

TIMESAVERS 252-4-IC, ... Wide Belt Sander, 4-Head.4-Head, 51" cap. - Great sander for solid wood and veneer panels equipped with (2) Contact rolls and (2) Air platens. Head Configuration1st Head: Rubber covered contact roll, 9-1/2" dia. 60 - 70 Durometer, 40 HP motor.2nd Head: Rubber covered contact roll, 9-1/2" dia. 50-60 Durometer, 30 HP Motor.3rd and 4th Head: Finishing platens, 2-1/2" wide "Veneer Saver" inflateable platens with adjustable timers for leading and trailing edges, 20 HP motor each head.Specifications: -- 38" Constant pass line height of Vacuum conveyor with suction fan and motor bed assembly for veneer and solid wood sanding. -- Adjustable air floating infeed and outfeed hold down shoes. -- 52" x 103" abrasive belts with "POSI-TRAK" electronic tracking.Equipped with & Features: -- Motorized part thickness adjustment with mechanical digital readout. -- Auto part thickness set-up, 0" - 6" opening. -- Hydraulic feed belt operation of 15 - 45 FPM via 7-1/2 HP hydraulic pack. -- 4-Motor load meters, controls mounted on belt loading side. -- Disc brakes on sanding head motors. -- 30" Infeed load area.

TIMESAVERS 2321-23-21 Planer Sander 2 Heads2-Head, 36" width cap.Specifications: -- 1st Head: 6" Dia. Helical head with (6) spirals of 4-sided carbide inserts, 25 HP motor. -- 2nd Head: Combination head with 5-1/2" dia. contact roll and 2-1/2" wide finishing platen, 20 HP motor, sanding head with 37" x 75" Abrasive belt with "POSI-TRAK" electronic tracking. -- Dial indicators for height adjustments, -- Conveyor belt feed with variable feed speed 20 - 45 FPM, automatic conveyor belt tracking. -- Anti-kick back fingers on infeed; planer head with sectional infeed shoe and double holddown rolls on outfeed, double infeed and outfeed rubber covered holddown rolls on sanding head. -- Motorized part thickness adjustment 0" - 5" with mechanical digital readout; -- Minimum part length 15"; Pass line height 33"-38". Complete with: -- Controls mounted on belt loading side, air activated caliper disc brakes on all heads, load meters for each head and 14" infeed loading area. -- Dust extraction 3,500 CFM, Compressed air usage: 3 CFM @ 90 PSI, -- Total load amps at 230 Volts - 145 Amps.

TiMESAVERS 237-KA IC Planer Sander 2-HEADs (2) Heads Planer Sander Combination, 37" width capacity.Head Configuration: -- 1st Head: 7" Dia. Helical "Quiet Cut" planer head with (6) spirals of 4-sided carbide inserts with 15ø rake angle, head turns @ 3,200 RPM, head adjustment with dial indicator readout, 30 HP motor. -- 2nd Head: Combination Sanding head with 6" dia. contact roll (60 to 65 duro.) and 2-1/2" wide finishing platen, 25 HP motor; sanding head with 37" x 75" abrasive belt with "POSI-TRAK" electronic tracking.Feed System: -- Variable feed speed 15 - 45 FPM, automatic conveyor belt tracking, 3-ply rough top conveyor belt. -- Anti-kickback fingers on infeed, air loaded sectional shoe with dial indicator adjustment and double grooved pinch roll on infeed of knife head. -- Infeed & outfeed pinch rolls on sanding head, air activated caliper disc brakes on all heads. -- Motorized part thickness adjustment 0" - 6" with digital readout.Complete with: -- Controls mounted on belt loading side, main motor fuse protection on both heads, load meters for each head, "over thick" shut-off system and 24" infeed conveyor extension.

Single Head Top and Bottom Sander

TIMESAVER 337-2 Wide Belt Sander, (2) Heads36" Width cap., Drum, Combination HeadHead Configurations:1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 40 HP motor.2nd Head: Combination Head, Drum with Platen 30 HP motor. Specifications -- 37" x 75" Abrasive belts with pneumatic tracking. -- 2 HP feed drive; Variable feed speed from 20 - 60 FPM.Equipped with & Features -- Infeed & outfeed spring loaded holddown rolls on both heads. -- Motorized thickness adjustment with indicator, -- 0" - 6" opening. -- Infeed safety stop -- Adjustable shoes before and after each head. -- Controls mounted on belt loading side, --Sanding head motors with air caliper disc brakes, and motor load meters.

Timesavers Model 2331-04-334 3-Head Orbital Sander 43" Machine

TIMESAVERS 7537 WIDE BELT SANDER1-Head, 36" cap., 0 - 5" opening. Combination head with 4" Contact Drum & 2" adjustable Finishing Platen. Equipped with: 37" x 75" Abrasive belt cap., oscillation controlled by through-beam electronic abrasives belt tracking system. 20 HP Main drive motor, disc brakes on main motor. Power raising and lowering of the conveyor bedMechanical digital thickness indicator, motorized conveyor bed lift, and Double infeed & outfeed holddown rollers.15 - 45 FPM Variable conveyor feed speed, (4) bed jacks.Complete with:Quick release outboard support, infeed stop bar.Centralized control panel, hour meter, main motor percentage of motor load indicator.

TIMESAVERS - 4321-45-01, ...2-Head 52" Wide Belt Sander.Head Configuration:1st Head: 9-1/2" Dia. rubber-covered contact roll, infeed & outfeed spring-loaded holddown shoes & pinch rolls; 40 HP Motor.2nd Head: Combination head with: 6" Dia. Rubber-covered contact roll & 2-1/2" wide Platen, infeed spring-loaded holddown shoe & outfeed double pinch rolls; 30 HP motor. 3rd Station: Panel Cleaning Brush.Specifications: -- 6" Thickness capacity. -- Variable speed feeds from 15 - 45 FPM. -- 52" x 103" Abrasive belt size.Equipped with & Features: -- Automatic part thickness adjustment with digital thickness indicator. -- Dual "POSI-TRAK" electronic abrasive belt tracking. -- Air caliper disc motor brakes and load meters. -- Infeed safety stop bar.

TIMESAVERS 237-4IC Four-Head Wide Belt Sander37" Width cap. Drum, Drum, Drum, PlatenHead Configuration:1st Head: Rubber covered contact roll, 9-1/2" dia., 30 HP motor;2nd Head: Rubber covered contact roll, 9-1/2 " dia., 25 HP Motor. 3rd Head: 9-1/2" Grooved Rubber Covered Contact Drum With A 20 HP Motor4th Head: Finishing platen, 2-1/2" wide, 20 HP motorSpecification -- 37" x 75" abrasive belts with Pneumatic tracking. -- Motorized part thickness adjustment, height, 0" - 6" opening. -- Automatic part thickness adjustment, -- Infeed & outfeed spring loaded holddown shoes, -- Variable feed speed from 15 - 45 FPM, 5 HP motor. -- Pneumatic feed beltEquipped with & Features: -- Motor load meters, -- Infeed emergency stop bar, -- Controls mounted on belt loading side, -- Automatic Trabon bearing lubrication system, -- Disc brakes on sanding head motors, -- 30" infeed load area.Note: Some spec's need to be verified

TIMESAVER 2331-24-001 Wide Belt Sander, (3) Heads: 43" Width cap. Drum, Drum, Combination Head.Head Configuration.1st Head: Spiral Rubber covered contact roll, 65 to 70 duro 8" dia., 25 HP motor.2nd Head: Spiral Rubber covered contact roll, 65 to 70 duro 8" dia., 20 HP motor.3rd Head: Combination head with 5-1/2" dia. 65 to 70 duro spiral grooved rubber contact roll and 2-1/2" platen - 15 HPSpecifications: -- 43" x 75" Abrasive belts. -- "Posi-Trak" electronic tracking & pneumatic tensioning. -- Contact roll & platen height adjustments with dial indicators. -- Conveyor belt feed, 20 - 45 FPM variable feed speed. -- Automatic conveyor belt tracking. -- Double infeed & outfeed spring loaded holddown rolls. -- 0" - 5" Max. motorized part thickness opening with LED readout. Equipped with & Features: -- Automatic part thickness setup. -- Air operated disc brakes. -- Motor load meters. -- 14" Infeed conveyor area, and infeed emergency stop.

TIMESAVER - 143-2HP75, ...2-Head Wide Belt Sander43" Width cap., Drum & Platen.Head Configuration:1st Head: 6" Dia. rubber covered contact roll, 25 HP motor.2nd Head: 2-1/2" Wide finishing platen, 15 HP motor.Specifications: -- 43" x 75" Abrasive belts. -- "Posi-Trak" Electronic tracking & pneumatic tensioning. -- 15 - 45 FPM variable feed speed. -- Automatic conveyor belt tracking. -- Constant Passline height 30" - 38", with 0 - 8" opening.Equipped with & Features -- Double infeed & outfeed spring loaded holddown rolls -- 0" - 8" max. manual part thickness opening --Mechanical digital readout --Air operated disc brakes --Motor load meters --21" infeed conveyor extension, and infeed emergency stop. --interlock switch located on belt loading door to stop sanding head if opened --Load meter to show amount of main motor hp used during operation --Mechanical digital readout operates below 90 dba --Operator manuals, control tags, danger signs and warning labels. --Quick release outboard support thickness setup device --Single cylinder air tensioning of abrasive belt for increased belt lifeNote Some spec's need to be verified

Timesavers 43" Speedsander Single Phase Machine

---In Auction---NO RESERVE---Fair Condition--- 7' Stroke Sander Specifications: - Table size 19” x 73-1/4” x 24” H, with 19-3/4” x 73-1/4” x 3/4” Thick Wood top. - Manual table stroke 26-3/4". Equipped with: - 7” W x 84” Face Sanding belt, with 3 HP - 1,140 RPM Motor. Details, Photos, Bidding: https://exfactoryauctions.com/Detail/SS-230670/event/A051324$1

---In Auction---Good Condition--- 24" 2-Head Wide Belt Sander Specifications: - Thickness cap. 0" - 5". Equipped with: - 1st Head: 5” Dia. Grooved rubber-covered contact roll, with 15 HP - 1,740 RPM Motor. - 2nd Head: 3” Dia. Grooved rubber-covered & 3” Dia. Smooth steel contact rolls, with Finishing platen, & 15 HP - 1,740 RPM Motor. - 1-1/2” Dia. Spring-loaded rubber-covered infeed & outfeed pinch rolls, (1) In front of 1st head, (1) In between heads, & (2) Pair after 2nd head. - 23-1/4” W x 3-1/2’ L Feed belt, with 2 HP - 1,720 RPM Motor. Control, with Motor load meters. Details, Photos, Bidding: https://exfactoryauctions.com/Detail/SX-230385/event/A051324$1