Woodworking Equipment For Sale

100 HP 230/460 volt 20” x 19” inlet 9” x 28” outlet no hopper

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

Wintersteiger DSG Sonic Frame Saw

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

Woods 502M hardwood flooring machine

WOODS Planer-Matcher - Model 412 motorized, heavy duty planer-matcher with 6 heads. Ideal machine for surfacing dimension lumber or specialty products such as siding and flooring. 6" x 14" capacity, 8 knife heads; 50 hp top, 25 hp bottom, 20 hp sides; 20 hp bottom profile, 15 hp top profile. Item 32203.

Woodtech QSG 650-R-RPA 24" Widebelt (2) Heads24" width cap, Drum, Combination HeadHead configuration1st Head: Contact roll2Nd Head: Combination head (Roller and Pad)Specifications -- 24" Widebelt Service Side: Left -- Working Thickness: 3-150mm -- Minimum Working Length: 460mm -- Feed Speed: 0-19m/miMachine Frame -- Built with rectangular profiled steel beams to give a very high rigidity to the frame;Main motors positioned inside the frame in a protected position -- Machine frame is connected by high strength hardware (8.8G), and welded for maximum rigidityEquipped with & Features -- V-belt drive from main motors to sanding heads, -- Disk brakes on each sanding drum for emergency stopFeed System -- Feed table is made of steel with a surface tolerance within 0.05mm; table polished to avoid wear of the internal side of the feed belt -- Table is heat treated for accuracy and durability -- Feed speed variable in continuous from 0-19m/minNote : Extra BeltsWoodtech Model QSG 650-R-RPA 24" Widebelt

Woodtech Heavy Duty Moulder Models: WTM-330 – 12” wide – available in 4, 5 or 6 head configurations.WTM-260- 10” wide – available in 4, 5 or 6 head configurations. WTM-230 – 9” wide – available in 4, 5 or 6 head configurations.WTM-200 – 7” wide – available in 4, 5 or 6 head configurations. Electrical Requirements: Operating voltage: 460 Volt/60Hz/3 Phase Features Available: Outboard bearings on WTM-330 Pneumatic hold-downs, and side pressurePLC controlled – LCD readout Heavy duty drive motorsBelt driven spindlesAuto Lubrication Optional: Automatic Infeed Table 7000 RPM 1st Spindle - 15 HP 2nd Spindle - 15HP 3rd Spindle - 15HP 4thSpindle - 255HP 5th Spindle - 25HP 6th Spindle - 15HP 480V 3Phase Schneider Electronics

Woodtech Planer Sanders Touchscreen Operation Pneumatic Exclusion on the Planer head. Heavy Duty Planing head with anti kickback and pressure shoes - 30 HP 2 Sanding heads 1st sanding head Steel Drum - 30HP 2nd sanding head - Combi -head -rubber roll with Platen- 20 HP Dust Brush on the outfeed ABB electronics 480V 3phase Heavy duty heat treated frame

Woodtech HD Horizontal Band SawMax. workpiece size: 300mmThickness of production board: 5–160mmWidth of conveyor belt: 375mmDiameter of saw wheel: 711mmFeeding speed: 0-15m/minHydraulic pressure: 50-60kg/cmSize of saw blade: 185” Length, 2” wide, 1.6mm thick Electrical Requirements: Voltage: 460V/60 HZ/3 phaseFull electrical load: 18.5 KWOverall dimension: 2800L x 2200W x 2000H

Woodtech will custom build your UV Finish Line! 24” 40” and 52” Width machines available 4 Head Wirebrush Single, Double, and triple Roll coaters 4 Head buffing Brush machine Denibbers Single, Double and Triple UV drying Ovens - with rotating Bulbs for safety 1M- 4M Conveyors 480V 3phase Schneider Electronics Touchscreen Operation Interlocking We can customize these machines to fit your needs

Woodtech Wide Belt Sanders Fixed Passline Bed 1st Sanding Head Steel Drum- 30 HP 2nd Sanding Head Rubber Drum- 30 HP 3rd Sanding Head 320mm Rubber Drum- 20 HP 4th Sanding Head Electronic Magnetic Segmented Platen with Chevron Belt ABB electronics 480V 3phase Heavy duty heat treated frame Optional Heads- CrossBelt, Orbital, Polishing

Panel Rip Saw available in 60" and 72" width capacity - Main Motor: 40 HP (460 V) - Infeed Motor: 3 HP - Main Spindle: 74 mm - Main Spindle Speed: 2500 RPM - Blade Diameter: 205 mm - Moveable blades with locking collars - Maximum Width: 60" or 70" - (12) Rubber Hold Down Rollers - Quick Change Blade Holders - Thickness Capacity: 0-30 mm - Variable Feed Speed: 0-15 meters/minute - Anti-Kickback Safeguard Options: - Semi Automatic Hydraulic Infeed & Outfeed Tables (3000 kg) - Automatic Infeed System (including lift table)

RipMaster400 with Auto skewing - Heavy Duty 60 HP Motor Touchscreen controls 2 movable blades Infeed System with Scanning ( We offer 3D rip optimization as well) Custom outfeeds available. 480V 3Phase Seimens Electronics

Woodtech Cabinet Door Sander

Woodtech 43" Sander Single Combination Head - Rubber roller with Platen ABB electronics 480V 3phase Heavy duty heat treated frame

Woodtech Brush Sander Vacuum Bed for cabinet Parts All Heads Oscillating All Sanding heads are on VFDs and Speed controlled for dialing in the perfect sand Reversible direction so you can utilize 2 different grits with out changing the paper Great for profiled products and cabinet doors etc. Large Intuitive Touchscreen Operation LED Inspection light on the outfeed ABB electronics 480V 3phase Heavy duty heat treated frame