Woodworking Equipment For Sale

Hot Air Edgebander for Preglued banding 0.4 - 1.5 mm thickness Automatic cutoff for up to 1/32" Coil feed with manual feed for strips Panel thickness 10-50mm Front and rear end trim Top/bottom trim

Laguna Bandt 4 Edgebander Machine is 6 months old Extremely low hours - Buyer upgraded to a larger machine!

Gantry Clearance: 12? Z Axis Travel: 13? Table Size: 4’x8' Working Area: 49?x97? Rapid Speed: 1,800 IPM Cutting Speed: 1,000 IPM Spindle HP: 12HP Spindle Speed: 6,000 – 24,000 RPM Cutting Time: 50 Hours Electrical: 208-230V/ 3PH Equipped With: 12 HP HSD Spindle 8 Position ISO 30 ATC Yaskawa AC Servos Drive Motors 6 Zone Vacuum Table Planetary Gear Box Drive System Tooling Kit Helical Rack & Pinion X/Y Axis Ball Screw Z Axis 10 HP Stock Regenerative Blower Vacuum Pump Syntec Industrial Control System Controller: B+R PP65 Stepper Package Footprint: 78?x127? Approx. Shipping Weight: 3,500 Lbs

Laguna Tools 51X75 Pro Widebelt Sander51" width cap. Drum, PlatenHead Configuration 1st Head: 8"; roller 30 HP ( Drives both heads )2nd Head : 4" Wide platenSpecifications : -- Main motor: 30HP -- Variable feed speed: 2HP -- Table lifting motor: 0.25HP -- Voltage: 220/3 PHASE -- (PLC) Programmable Logic Control --Automatic Thickness Control -- Max sanding height: 150mm/5.9″ -- Min sanding height: 1/4″ [6,4 mm] -- Max sanding width: 51″ [1300 mm] -- Sanding belt size: 51″ X 75″ [940 mm X 1905 mm] -- Adjustable sanding platen: 1-3/4″ inch [45 mm] -- Diameter of sanding drum: 8"; + 4"; -- Length of sanding drum: 51"; -- Sanding drum RPM: 1725 RPM -- Conveyor height at lowest setting: 32 inches [813 mm]Equipped with and Features -- Conveyor speed: 12-60 FPM, -- Dust port size: 4″ [100 mm] -- Number of dust ports 3 -- Foot print: 63"; X 65"; X 98"; -- Cabinet: Steel -- Operating air pressure: 6 Bar -- Operating air pressure: 6 Bar -- Sanding belt oscillation: Pneumatic/Adjustable -- Sanding belt motor break: Yes. Air operated disc break -- CSA: Fully Certified -- Net Weight:4200 Lbs. -- Ship Weight: 4450 Lbs.

LAGUNA BM23E-2 ... Double Row Line Borer(2) 23-Spindle heads on 32 mm centers, (2) 3 HP motors, drills vertically from bottom.Specifications: -- Distance between first and last spindle 851 mm (33.50"). -- Spacing between zero and max. on the first head 0 - 4". Min. distance between two heads 7.25". Max. boring line spacing to the second head 24". -- 2,800 RPM spindle speed; collets accept 10 mm shank bits. -- Heavy overhead material holddown system with (4) pneumatic material clamps. -- (2) independent air throttles to control the drill-heads upstroke speed.Complete with: -- "Set screw" drill adapters, "quick set" system for depth of drilling. -- Extension fence with (3) flip-stops and foot pedal control.

LAGUNA PRO 37 WIDE BELT SANDER1-Head, 36" width cap. - Combination sanding head with 4" dia. rubberized contact roll & 3" wide "dual action" polishing platen.Equipped with: -- Abrasive belt size 37" x 75" -- Pneumatic abrasive belt tensioning. -- Electronic abrasive belt tracking. -- 20 HP main drive motor. -- 1HP Variable feed speed motor for 12 - 60 FPM. -- 1/4 HP Conveyor bed elevation motor, with digital programmable thickness set up and AUTO-SIZE thickness system as well. -- Infeed & outfeed rubber covered holddown rolls. -- 0" - 5-1/2" thickness capacity.Complete with: -- Air-operated disc brakes on sanding head, emergency stop button

LANGE MASCHINEN BAU B85K Edgebanding MachineSpecifications: -- Workpiece thickness: 8 – 50 mmWorkpiece width min.: approx. 75 mmWorkpiece length min.: approx. 120 mmEdging thickness: 0,4 – 3,0 mmMax edge thickness = Workpiece thickness + 4mm (2+2)One sided automatic edge banding machine with direct glue application to straight workpieces, high frequency cut off station, high frequency top and bottom milling unit, chain feed, double roller top pressure and work piece support. For ABS,PVC, melamine and strong wood veneer roll materials as well as fixed lengths.

LANGZAUNER G-5920 Cross-Cut Guillotine. Specifications: -- 35.5" Blade hydraulic pressure bar and knife; -- 5 Gal tank, pump is driven by 1.5 HP motor.Complete with: -- 2-Hand operation or foot pedal, Emergency-Stop, (3) photocells for safety, -- All safety guards per international standards.

LARICK 120 Single Spindle Profile Sander;Sands raised panels, and door edges.Specifications: -- 1" Dia. x 4" long belt driven arbor; 700 - 1700 RPM variable speed, 1 HP motor. Arbor is vertically adjustable. -- Complete with: 25" x 22" butcherblock maple table, enclosed fabricated steel base and large hand wheels for easy spindle adjustment. -- Includes: Sensing safety guard for anti-automatic restart protection.

LARICK 360 V Profile SanderSpecifications: -- Single head; 2 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, variable speed from 400 - 1,800 RPM; 4" vertical & horizontal spindle adjustment. -- Features: -- 36" x 33" Solid wood tabletop, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARICK profile discs made to customer specifications. -- Complete with: -- Enclosed fabricated steel base, dust hood w/piano hinge for easy access to sanding disc, stationary fence, and large hand wheels for easy spindle adjustment.

The Model 390 Automatic Shaper is a New concept in shapers. -- This "New Shaper" is conveyor fed, making it ideal for shaping small parts which could not be fed with a conventional Power Feeder. -- The 7.5 HP inverter controlled variable speed shaper can shape pre-arched panels automatically. Using a Template, it can also hog out arched panels. -- Horizontal and Vertical shaper adjustments with digital position indicators and the 5-position fence make profile changeovers extremely quick and simple. -- Standard stack tooling spindle -- Optional upgrade to 460 V, additional $ 250.

LARICK 410 Shaper / Sander (Feed Through)Designed and Manufactured to give years of dependable service.Features: -- The 410 will Shape and Sand a wide variety of workpieces. -- The 410 is Standard with a New easy-to-use Touchscreen that displays RPM and Load for each motor. -- With a 6" Wide Feed Chain and (4) four staggered rows of hold-down wheels.Specifications: -- 7.5 HP inverter controlled variable speed Shaper. -- Two 2 HP Sanding heads with 1" Counter-rotating spindles. -- Each station tilts forward 60° and Backward 40° and will accommodate up to 9" dia. sanding wheels. -- 0.75 HP motor on the Feed Chain. -- All have Digital readouts for speed and Load. -- Horizontal and Vertical shaper adjustments with digital position indicators and the 5-position fence make profile changeovers extremely quick and simple. -- Please call for pricing on the 410-FLT (floating heads).

Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- Features: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy ascess to sanding disc, stationary fence, large hand wheels for easy spindle adjustment.

Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- Features: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy ascess to sanding disc, stationary fence, large hand wheels for easy spindle adjustment.

Single head; 1 HP Belt drive motor, Fixed spindle, Mechanical controlled variable speed from 700 - 1,700 RPM, 4" vertical spindle adjustment. -- Features: 27" x 25" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust port, large hand wheels for easy spindle adjustment.

This BRIGHTLINE 532 mm Alignment Laser will work well on a variety of machines, and on dark surrfaces shows up better than the common Red line. -- The 5 mW Green line shows four to five times more visable to the human eye than an equally Powered Red line. -- The output power is 5 mW; 100º fan angle. -- Expected life 3,000 - 5,000 hours. -- Projection type (dot/line/cross): Dot. -- Package includes: Alignment Laser mounted in a block, Mounting bracket and power supply. This light can also be powerd by direct 3.0 VDC (300 - 800 mA draw). -- Laser beam thickness at aperture is 3 mm with a divergence of 0.1 mm for every meter of beam length. This is a focus adjustable laser with an operating temperature of 15C - 35C.

This BRIGHTLINE 635 Mm Alignment Laser will work well on a variety of machines. It is ideal for any aplication where a highly visible line projected onto a surface is needed. -- The output power is 5 mW; 100º fan angle. -- Expected life 3,000 - 5,000 hours. -- Projection type is a line and is focus adjustable. -- Package includes: Alignment Laser mounted in a block with mounting bracket and a direct 3.0 VDC (300 - 800 mA draw) power supply. -- Line straightness better than 0.1% over full length, line divergence (beam diameter) will expand 0.3 mm for every 1 meter increase in distance from the Laser to the target surface. The beam diameter at the aperture is 4.0 mm. -- Operating temperature is -10°C to +40°C.

LEADERMAC 630P "PLATINUM" Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 12" x 6".Specifications: -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- Spindle dia. 1-13/16" (40 mm and 2-1/8" also available) with cutterhead speed of 7,200 RPM. -- Outboard bearings on spindles 1,4,5 and 6. Pneumatic locks on outboard bearing supports on top heads. -- All spindles equipped with mechanical digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 5 HP feed system with feed speeds of 20 - 100 FPM. -- Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. Features and complete with: -- Central lubrication; -- Short stock attachment. -- Automatic table lubrication pump. -- Side pressure roller mounted to infeed table. -- Sound enclosure and includes: (1) set of cutter heads.

LEADERMAC 623P PLATINUM Feed Through Moulder; 6-Head (B-R-L-T-T-B), "PLATINUM" working cap. 9-1/16" x 6". -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- Spindle dia. 1-13/16" (40mm and 2-1/8" also available) with cutterhead speed of 8,000 RPM. -- All spindles equipped with electronic digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 5 HP feed system with feed speeds of 20 - 100 FPM. -- Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. -- Includes: Central lubrication, short stock attachment, automatic table lubrication pump, side pressure roller mounted to infeed table and sound enclosure. (1) set of heads.

LEADERMAC HYPERMAC 530 C COMPACT Moulder Feed Through 5-Head (B-R-L-T-B), working cap. 12" x 6" capacity. -- 1 Piece – Extra Heavy Cast Iron Main Frame. Specially heat-treated for maximum stability and minimum vibration78" (2m) long Adjustable Infeed Table and Fence (each adjustable .4") -- Head sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 30 HP, and Bottom 25 HP motor; spindles are manufactured from SCM-440 tool steel (Mitsubishi-Japan) with special heat treating to HR 55C Hardness fitted with-all spindles equipped with mechanical digital readouts. -- Spindles: dia. 1-13/16" with a cutter-head speed of 7,200 RPM., -- Precision Hydro-loc Outboards for horizontal (Top/Btm.) heads, -- Spindles 3 & 4 have Dual Siko Counters on the Radial Set (for fastest head setup -- Chip-breaker and pressure elements pneumatic; include mechanical digital readouts for accurate positioning. -- Powered rise and fall to extra heavy feed support beam by 1 HP / 0.75 kW motor; upper support beam is supported at both the In-feed and Out-feed ends on 2 large columns for best most rigid upper beam support. -- All feed rolls and pressures move with top beam rise and fall, including safety switches at extreme points. -- 8 Top Driven Feed Roll Shafts (each equipped with Multiple 2" wide rolls that can be quickly spaced/positioned or removed as desired). -- (2) Full-width Driven Bottom Bed Rolls, (2) Piece Full-width Bottom Driven In-feed Roll Bottom Rolls have quick up-down adjustment by cam type lift system -- Feed: Inverter drives 5 HP feed system with feed speeds of 20 - 80 FPM. Electronic Digital Speed Readout, Inch forward and reverse to feed with duplicate control at top head position for fast easy setting -- Infeed/Tables: 1.2 M (4'0") in-feed table .012"-.014" chrome thickness chromed tables and fences, central lubrication, automatic table lubrication, (1) short stock attachment. -- Includes: Lift up sound and safety enclosure including safety interlocks and good strobe-free lighting inside the enclosure. Central Lubrication System to all main slides from front of moulder(1) set of cutter-heads, manuals, set up tools and (1) rebuilt top spindle. -- Options Included, Cutter- head measuring stand Included, Precision Hydro-loc Outboard Bearings and Support for horizontal (Top/Btm, heads $ Included. Pneumatic Locks on the Outboard Supports of the Top Head in lieu of Manual Locks are Included. -- Note – With 7200 RPM Spindles running unjointed (Single Knife Finish) you will realize a 20% increase in productivity.Pneumatic Roller Side Pressure Unit between the 1st bottom head and the Fence side head in lieu of spring-tensioned holdover for best-controlled operation & variable pressure to material going through the side heads. Included, Pneumatic Top Head Chip breakers with Independent pressure controls to each position $ Included, top Head Chip Breaker Plates are Hard Chromed & Grooved for Safety Purposes $ Included, Axial Adjustment of the las