Woodworking Equipment For Sale
1752 Results Found
$ 14,599
SAFETY SPEED 3760 Wide Belt Sander;Heavy welded construction minimizes vibration and ensures consistency in sanding.Specifications: -- Single-head 37" wide Combination Sanding Head. -- Rubberized 4-1/4" dia. contact drum with a 2-1/2" finishing platen. -- Hand wheel to manually change the thickness setting form 0" - 7-1/4". -- 10 HP Single or 15 HP 3-Phase motor (for an additional $500). -- 37" x 60" Abrasive Sanding belts. -- Pneumatic belt tensioning and infrared electric eye tracking. -- 1-1/2" Dia. infeed & outfeed rubber covered holddown rollers. -- Infeed safety stop bar, emergency stop button and 6" dia. dust outlet. -- Available Options: Hour meter and 15 HP, 3-Phase motor, and digital readout for conveyor bed opening. -- Dimensions: 50-1/2" L x 47" W x 63" H (Crated Dimensions - 55-1/2" L x 52" W x 68" H).
SAFETY SPEED MFG 60HA Hot Air Edgebander; Safety Speed Cut now offers a Hot Air Edgebander that is small in price yet big in ability.The NEW "60HA" features: -- Electronic variable speed control -- Digital Electronic temperature control -- Adjustable Heat nozzle that saves energy. -- Electromagnetic end-cutters; no compressed air needed -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean -- Automatic conveyor for consistent feed rate.....and yes it is "American Made"!
$ 20,499
Heavy welded construction to minimize vibration and ensure consistent sanding. -- Single 43" Wide combination sanding head. -- Rubberized 5-1/4" contact drum with a 2-1/2" wide finishing platen. -- Hand wheel to manually change the thickness setting form 0" - 7-1/4". -- DC Conveyor drive with variable feed rate of 0 - 18 FPM. -- 43" x 75" Abrasive belts. -- Pneumatic belt tensioning and infrared electric eye tracking. -- 1-1/2" Dia. infeed & outfeed rubber covered holddown rollers. -- Infeed safety stop bar, emergency stop button and 6" dia. dust outlet. -- Avaialble Options: Motorized conveyor setting; Hour meter; Digital height setting; and 20 or 30 HP 3-Phase motor. -- 53" L x 56" W x 70" H (Crated Dimensions - 58" L x 61" W x 75" H).Note: $20,499.00 selling price included a 20HP motor$20,099.00 10 HP Single-phase motor, included.
$ 59,995
$ 1,022
SAND-RITE DUO-DLX Spindle Sander; Horizontal spindle sander with 3/4 HP BALDOR motor. -- Optional brush heads sand irregular surfaces with out loss of shape, and the optional pneumatic drum heads (available in 2" to 8" diameters) allow the operator to regulate how firm the sanding head needs to be to conform the head to what they are sanding. -- Price does not include the stand - Add $308.00 Cast iron stand."Drums, brush heads, and sleeves are additional".Brush Head: ADD $ 175.00 2" X 8" pneumatic drum: ADD $ 140.008" X 9" pneumatic drum: ADD $ 302.00 Special note: 220 grit is the finest grit supplied for Brush Head
$ 1,550
SAND-RITE DB-612 DLX Sander with a 3/4 HP BALDOR motor. -- This machine comes equipped with- -- (1) 6" Diameter x 7" Wide pneumatic drum head , which allows the operator to regulate how firm the sanding head needs to be to conform the head to what they are sanding. -- (1) B-12 Brush Head, which allows the sanding irregular surfaces with out loss of shape. -- And matching Heavy Duty Cast Iron Stand.
$ 6,500
SANDINGMASTER KSB-900 SINGLE HEAD WIDE BELT SANDER36" width cap., combination sanding head1st Head: Rubber covered spiral grooved contact roll & finishing platen,Specifications -- 15 HP main motor; -- 37" x 75" abrasive belt size -- Electronic tracking and air tensioning of abrasive belt; -- Rubber covered infeed & outfeed holddown rollers & holddown shoes -- Variable feed speed 15 - 45 FPM via 1.5 HP motor; -- 0" - 5" manual part thickness opening, includes optional floating bed for sanding fine veneersEquipped with & Features -- Extended infeed -- Load meter -- Disc brake on main motor and safety stop bar.
$ 18,500
SANDINGMASTER SA3300-900 TRIPLE HEAD WIDE BELT SANDER3-Head, 36" max. width cap. - 1st Head: 11" Dia. rubber covered contact roll, 24 HP motor; 2nd Head: 11" Dia. rubber covered contact roll, 18 HP motor; 3rd Head: Combination head with rubber covered contact roll and finishing platen, 18 HP motor. 37" x 75" Abrasive belts with electronic tracking. -- 2-Speed conveyor feed, 23 & 46 FPM, 1.0/1.7 HP motor, 0" - 6" motorized part thickness with LED readout, a joystick lever controls raise and lower of feed bed and start and stop of conveyor belt, also includes "SP-Matic" automatic part thickness setup. -- Thin veneer sanding package with rigid table setting for solid wood dimensioning and floating table setting for veneer sanding, infeed and outfeed spring loaded holddown shoes. -- Includes: Motor load meters, electronic brakes on sanding heads, infeed safety shutoff bar and 18" infeed conveyor area. Actual model "SA-3300-900".
Call for Price
SAVI HFK-250 Veneer Guillotine; General Specs: -- 102.4" (2,600 mm) Width cap., 4" daylight opening, hydraulically operated knife, 4 HP Leroy-Somer motor powers hydraulic unit with reservoir. -- Originally fitted with motorized parallel fence with 0.5 HP two speed gearmotor drive, push button operated, adjustable from 1" - 50" with magnified tape reader in front of machine. -- Equipped with: 2nd Cut feature with automatic reset, laser guide line light, photoelectric barrier guard for knife & hold-down beam, 2-hand operation of knife cycle. -- Note: Rear fence has been removed or modified. Shaft has chain/sprocket.
Call for Price
SAVI HFK - 400 Veneer Guillotine with 2nd Cut Feature.General Specs: -- 157" Width cap., 3-3/16" daylight opening, Motorized parallel fence adjustable from 1" to 30" (fence traverses with two lead screws), push-button operated with LED readout. -- Hydraulically operated knife stroke and hydraulic overhead pressure beam with self-contained hydraulic unit. -- Features: 2nd Cut feature with automatic reset, safety photoelectric barrier guard for knife and holddown beam, 2-hand operation of knife cycle. -- Includes: Fully refurbished.
$ 3,900
SAWSTOP ICS 73230 Table Saw w/Safety "Stop Feature".Specifications: -- 10" Blade cap., 7-1/2 HP motor, 3-1/8" depth of cut @ 0°, 2-1/4" depth of cut @ 45°, 13/16" max. dado width, 5/8" arbor dia. -- Features: -- Enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and SAWSTOPS's revolutionary flesh detecting safety mechanism. -- Includes: -- 52" "T-Glide" rip fence system, side support table and laminated top, 4" Dust collection port, magnetic contractor motor control, main power switch with removable lock-out key. Actual model is ICS 73230.
$ 3,250
SAWSTOP 10" Table SawSpecifications: -- 10" Blade cap., 3 HP motor, 3-1/8" depth of cut @ 0°, 2-1/4" depth of cut @ 45°, 13/16" max. dado width, 5/8" arbor diameter. Features: -- Enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and SAWSTOPS's revolutionary flesh detecting safety mechanism. -- Includes: -- 50" Rip fence, side support table and laminated top, 4" Dust collection port. -- Magnetic contactor motor control, main power switch with removable lock-out key. Actual model # ICS 31230.
$ 4,800
SAWSTOP ICS 53230-52 10" TABLE SAWSpecifications: -- 10" Blade cap., 5 HP motor, 3-1/8" depth of cut @ 0°, 2-1/4" depth of cut @ 45°, 13/16" max. dado width, 5/8" arbor diameter. Features: -- Enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and SAWSTOPS's revolutionary flesh detecting safety mechanism.Includes: -- 52" T-Glide Rip Fence, sliding crosscut table; side support table; 4" dust collection port. -- Magnetic contactor motor control, main power switch with removable lock-out key.
$ 4,250
SAWSTOP ICS 53230-52 10" TABLE SAWSpecifications: -- 10" Blade cap., 5 HP motor, 3-1/8" depth of cut @ 0°, 2-1/4" depth of cut @ 45°, 13/16" max. dado width, 5/8" arbor diameter; blade tilt left. Features: -- Enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and SAWSTOPS's revolutionary flesh detecting safety mechanism.Includes: -- 52" T-Glide Rip Fence, side support table; 4" dust collection port; miter guide. -- Magnetic contactor motor control, main power switch with removable lock-out key.
$ 17,500
SCHEER Veneer Panel Saw. -- General data: 122" Cutting length, 1-1/2" depth of cut, 3/4" - 42" max. back fence cap. with extension fingers, 5 HP arbor motor; saw carriage travels on hardened & ground ways. -- Equipped with: Manual operated saw carriage with hand crank Full-width rear fence with support, hand wheel operated rear fence with scale & arrow readout for positioning. -- Lockable fence at cutting position, fence line also pivots up to permit end trimming against the left guide fence. - Pneumatically controlled hold-down pressure beam. -- Complete with: Push button control and dust collection chute with channel in table base.
$ 17,200
SCHELLING FMH 430 Front Load Panel Saw169.2" (4,300 mm) Cutting length, 161" (4,100 mm) pull-back, 3.3" (85 mm) max. saw blade projection, 25 HP (19 kW) main saw motor & 2.5 HP (2 kW) scoring motor. -- Variable saw carriage travel speed from 0 - 262 FPM (80 MPM), return speed of 262 FPM (80 MPM), LED ammeter to show load of main saw motor during operation. -- Electronically controlled overhead program fence, rack & pinion driven on both sides, forward speed from 0 - 262 FPM (80 MPM), return speed of 262 FPM (80 MPM); (9) material gripper clamps open up to 3.1" (80 mm). -- SCHELLING "COMPOSER" Electronic control with color monitor (displays cutting dimensions and patterns w/moving graphics), self-diagnostic, data input by keyboard or possible direct downloading from office PC. -- 90-1/2" (2,300 mm) Long crosscut fence (front-to-back); (2) side/crosscut aligners for up to 87" (2,210 mm) crosscuts; split pressure beam, (1) in front & (1) behind. -- (3) Front mounted air float tables for moving panel from rip position to cross-cut position, 24" x 78" (610 x 1,981 mm) each, (2) in the crosscut section are movable. -- Rear of machine fully enclosed for safety with man-height sheet metal panels & wire screen windows. -- Main saw blade is 370mm, Scoring blades are 200mm. Actual model is FM 430 MCS-F.This machine came equipped with the following optional upgrades: -- Formatting stops (for cutting panels with plastic laminate hanging over the edge), Real time label printing (industrial printer included), Symmetrical Cutting, Window Cutting, Postform Scorer (edge scoring saw that aligns with the main saw blade to reduce chipping at the exit side of the main blade travel), Large miter gauge that mounts to the saw to facilitate making mitered cuts, & Laser light that shows the cutline for freehand manual cutting.
SCHELLING FMH 430 / 410 Rear Load CNC Panel Saw169.2" (4,300 mm) Cutting length, 161" (4,100 mm) pull-back, 3.3" (85 mm) max. saw blade projection, 20 HP (15 kW) main saw motor & 2.5 HP (2 kW) scoring motor. -- Equipped with: -- Variable saw carriage travel speed from 0 - 196 FPM (60 MPM), constant return of 196 FPM (60 MPM), LED ammeter to show load of main saw motor during operation. -- Electronically controlled overhead program fence, rack & pinion driven on both sides, forward speed from 0 - 196 FPM (60 MPM), return speed of 196 FPM (60 MPM); (9) material gripper clamps open up to 3.1" (80 mm). -- Features: -- SCHELLING "COMPOSER" Electronic control with Windows NT operating system & color monitor (displays cutting dimensions and patterns w/moving graphics), self-diagnostic, data input by keyboard or possible direct downloading from office PC. -- Complete with: -- 90-1/2" (2,300 mm) Long crosscut fence (front-to-back); (2) side/crosscut aligners for up to 87" (2,210 mm) crosscuts; split pressure beam, (1) in front & (1) behind. -- (3) Front mounted air float tables for moving panel from rip position to cross-cut position, 24" x 78" (610 x 1,981 mm) each, (2) in the crosscut section are movable. -- 4-Post electronically controlled screw type panel stack lift table, 9,900 Lbs (4.500 kG) cap.; max. bunk height 27.5" (700 mm) without a pit or risers. Fully enclosed for safety with man-height sheet metal panels & wire screen windows. Rear of machine fully enclosed for safety with man-height sheet metal panels & wire screen windows.
$ 17,500
SCHELLING - FM 430, ...Front Load CNC Panel SawSpecifications: -- 169" Cutting length & 169" pull back; 3.35" (85 mm) max. saw blade projection; 18 HP (13 kW) 4,100 RPM main & 3.4 HP (2.5 kW) 5,600 RPM scoring motor. -- Features: -- Variable saw carriage travel speed from 0 - 196 FPM (60 MPM); constant return of 196 FPM (60 MPM). -- Electronically controlled overhead program fence with rack & pinion driven on both sides; forward speed from 0 - 196 FPM (60 MPM), return speed of 196 FPM (60 MPM); equipped with (6) gripper clamps (open up to 3.1" (80 mm). -- Complete with: -- SCHELLING "Commander" Computer Control; color monitor (displays cutting dimensions and patterns w/moving graphics); self-diagnostic; data input by keyboard. -- Includes: -- 2-3/4" to 87" (2,200 mm) Long side/crosscut aligning zone: (1) Aligner in front & (1) behind the cut line. -- (3) Front mounted air float tables for moving panel from rip section to the crosscut section, (2) movable and (1) fixed; each with their own blower. -- Rear of machine fully enclosed for safety with man height sheet metal panels & wire screen windows.
$ 19,500
SCHELLING FM-430/410 CNC Front Load Panel SawSpecifications & Features: 169" (4292 mm) Cutting length & 165.3" (4,200 mm) pull back, 3.75" (95 mm) max. saw blade projection; 25 HP (19 kW) 4,100 RPM main & 3.4 HP (2.5 kW) 5,600 RPM scoring motor. -- Equipped with: Variable saw carriage travel speed from 0 - 278.8 FPM (85 MPM), constant return of 278 FPM (85 MPM). -- Electronically controlled overhead program fence with rack & pinion driven on both sides; forward speed from 0 - 278 FPM (85 MPM), return speed of 278.8 FPM (85 MPM); equipped with (8) gripper clamps (open up to 5" (130 mm). -- Features: SCHELLING "COMPOSER" IBM-AT Compatible Computer Control; aftermarket color monitor (displays cutting dimensions and patterns w/moving graphics) , self-diagnostic, data input by keyboard; onboard optimization program. -- Complete with: 2-3/4" to 87" (2,200 mm) Long side/cross-cut aligning zone, (1) aligner in front & (1) behind the cut line. -- (3) Front mounted air float tables for moving panel from rip section to the cross-cut section, (2) movable and (1) fixed; each with their own blower. -- Rear of machine fully enclosed for safety with man-height sheet metal panels & wire screen windows. T