Woodworking Equipment For Sale

Northtech NT 16R-10 Tilting Arbor Table Saw Infeed Roller 10 HP Motor

Northtech MRS-12N Gang Rip 50 HP Motor Needs a new safety with on the door

NORTHTECH NT-610EL Top & Bottom Planer:24" Wide x 7.5" thick capacity; 1/4" minimum thickness; 12" minimum stock length.Specifications: -- Cutterheads: 25 HP top head; 20 HP bottom head; 5,800 RPM on cutterheads; (6) row spiral insert cutterheads, Carbide knives 15 mm x 15 mm x 2.5 mm 4-sided -- Feed works: 3 HP variable speed feed with speeds from 20 to 75 FPM; 1 HP motorized raise and lower of bed; DP-525 digital thickness controller; Overhead carpet style feed system Equipped with & Features -- Sectional chip breaker; Hard chrome plated bed; Automatic lubrication for feed system; Amp load meter -- Dust Requirements: 3,800 CFM; (1)10" and (1) 7" dust outlet Seller states this machine has less than 600 Hours of use.

NORTHTECH NT-KL-920-PRR- B & NT-KL-920 PRR-U Top and Bottom 3 Head Planer Sander(3) head bottom with Planer, drum and platen, (3) heads Top with Planer, Drum and platen 920 mm (36") wideCapacity 36" X 5" thicknessSpecifications:Bottom machine model NT-KL-920 PPR -- Infeed driven conveyor 37" X 72" long -- 1st Head: Spiral cutterhead, (8) rows of 15 x 15 x 2.5 mm inserts carbide knives, (4) sides for rotation, and low tool cost. Cutterhead is (175 mm) 7" in dia. and with a 50 HP motor. Segmented chipbreaker prior to the cutterhead. -- 2nd Head: Contact roller, (280 mm) 11" in diam., 70 durometer, powered by a 40 HP motor, running at 3,600 FPM belt speed. Sanding belt size of 85" x 37". -- 3rd Head: 3-1/4" Pneumatic Polishing Platen, engineered as a combination station, air cushioned and adjustable in pressure to various grits and materials application. Powered by a 30 HP motor -- Lifting & Lowering conveyor bed motor 1.5 HP (Includes auto thickness set-up device -- Variable speed 7.5 HP inverter duty motor integrated with a AC inverter (VFD) control providing variable feed rate from 15 to 70 FPM for heavy calibration; LED readout feed speed indicator -- Microprocessor control for conveyor bed positioning to high precision via key pad entry. -- Automatic electronic pre-set panel thickness gauge / micrometer. -- Automatic Air Jet blast cleaning system on both sanding heads.Top machine model: NT-KL-920 PRR-U -- 1st Head: Spiral cutterhead, (8) rows of 15 x 15 x 2.5 mm inserts carbide knives, (4) sides for rotation, and low tool cost. Cutterhead is (175 mm) 7" in dia. and with a 50 HP motor. Segmented chipbreaker prior to the cutterhead. -- 2nd Head: Contact roller, (280 mm) 11" in diam., 70 durometer, powered by a 40 HP motor, running at 3,600 FPM belt speed. Sanding belt size of 85" x 37". -- 3rd Head: 3-1/4" Pneumatic Polishing Platen, engineered as a combination station, air cushioned and adjustable in pressure to various grits and materials application. Powered by a 30 HP motor -- Lifting & Lowering conveyor bed motor 1.5 HP (Includes auto thickness set-up device -- Variable speed 7.5 HP inverter duty motor integrated with a AC inverter (VFD) control providing variable feed rate from 15 to 70 FPM for heavy calibration; LED readout feed speed indicator -- Microprocessor control for conveyor bed positioning to high precision via key pad entry. -- Automatic electronic pre-set panel thickness gauge / micrometer. -- Automatic Air Jet blast cleaning system on both sanding heads. -- Powered dorp down conveyor between bottom and top machineFeatures & Includes For Both Machine: -- Massive Mono Block base consisting of 3/4" thick plate steel weldments. -- Large diameter roller hold-downs, ball bearing supported and 65 duro UV rubber are standard features. -- Automatic soft start of main motors (Y-Delta). -- Disc braking / emergency shut down protection for: Sanding belt breaking, non- tensioned sanding belt, mistracking of sand belt. -- All mot

NORTHTECH 24-HCVS-XL HELICAL HEAD PLANER 24" width capacity and can handle up to 7" thickness. -- 10 HP V-belted cutterhead motor, equipped with 3" Spiral Cutterhead with 6 rows of (24)15 x15 x 2.5mm insert knives (144 total knives) -- 1 HP Feed motor, variable feed speed 0 - 60 FPM -- Sectional infeed roller, sectional chipbreaker.1/8" Min. stock thickness, 4" min. stock length butted, 13" min. stock length not butted, 1/4 max. depth of cut, 21" x 27" powered table with digital position controller.Complete with: Magnetic motor controls and shavings hood.

NORTHTECH NT 400EL Double Head 16" PlanerHeavy Duty Chain Drive Series Double SurfacerSpecifications: --15 HP Top, 15 HP Bottom Head Motor -- Dual (6) Row Helical Cutterhead with four sided 15 x 15 x 2.5 mm Inserts -- 5,175 RPM solid steel cutterheads with Class 7 NSK bearings -- Cutterhead dimensions: 5"; dia. x 16"; long -- Operating decibel rating of 79 dbProduct Dimensions: -- Working thickness 10 - 155 mm (3/8"; - 6-1/2";) 8 mm min. on request -- 13"; Min. working length -- 16"; Maximum widthFeed System: -- 3 HP Feed motor -- Carpet feeding spike system with (644) spikes -- Feed speed 25 - 85 FPMFeatures: -- 1 HP Elevation motor -- Mechanical variable speed -- Digital control panel with 3 amp meters -- Chrome bed plate 0.01mm (0.004";) thick -- Passline at 32"; -- Amperage requirement: 230V / 115 AMPS, -- (2) 6"; Dust ports requiring 981 CFM @ each point of extraction -- Automatic lubricating system with low level shut off -- UL/CE Certified electrical components -- Includes operator’s manual and parts book -- Net weight: 5,990 Lbs -- Machine / Packed weight: 5,990 Lbs / 6,195 Lbs -- Machine/Packed dimensions (L x W x H): 98"; x 50"; x 70"; / 101"; x 46"; x 80"; -- One year parts warrantyNOTE: All machines are tested stateside prior to shipment providing trouble-free start-up.

Northwood IH 512 5'x12' CNC Router Travaini 40 HP Pump Gorbel Jib Crane with Schmaltz Vacuum

NOVY 1872V Multi Spindle Vertical Boring Machine 12 Spindles Vertical boring machineSpecifications: -- Table Hardwood 18" X 72' -- Table stroke 0"- 6" -- (12) Spindles in line at 5" center to center, spindle nose with 0" to 1/2" chuck -- (2) drive motor 2 HP with magnetic starter -- (4) Spring loaded hold down -- Savety guard -- Foot swtich

Oakley Edge Sander

OAKLEY H-5 Double Sided Edge Sander. -- General Specs: With 7.5 HP -1,800 RPM TEFC motor; (2) 8-1/2" x 57-1/2" Cast Iron platens; 8" x 164" abrasive belt, 4,680 FPM belt speed. -- Equipped with: One 11" x 62" Cast iron side table on one side and (1) 19" x 64" cast table on the other side, (1) cast iron radius tilting end table, end table tilts 0 ° - 45°; 6" vertical table travel w/hand wheel adjustment. -- Features: Rubber covered direct drive pulley and idler pulley,Complete with: Magnetic starter with overload protection, (8) dead head radius ends with graphite covering, and (1) steel covered spare head roll.

OAKLEY - D-1, ...Stroke Sander(2) Heads; 128" x 48" stroke (in & out). - Sanding heads: (1) 5 HP - 1,740 RPM Motor & (1) 7.5 HP - 1,740 RPM motor; both heads use 6" wide x 24-5/6' (approx.) long abrasive belts; model "SA-2" all aluminum dustproof, single lever stroking pad moveable from belt-to-belt; 27" max. adjustable vertical table opening; rack & pinion mechanism for tensioning & tracking each sanding belt. -- Complete with: (2) Dust hoods, magnetic controls, and reversing switch. -- Includes: 12" Riser blocks to increase height of belt above table.

OAKLEY Model D Stroke Sander. -- With lever stroke pad assembly 104" x 36" table with 36" of horizontal travel and approx. 10" of vertical adjustment. -- 16" diameter x 6-1/2" face pulleys (drive pulley rubber coated); (2) 8" diameter dust outlets, (1 per side). -- Approx. 24'-10" x 6" wide abrasive sanding belt length -- 7.5 5 HP 1,150 RPM direct drive motor. Complete with dust hoods. -- 17-1/2' x 6' x 6' approx. overall dimensions. Weighs approx. 2,500 lbs.

OGAM PO/M Straight Line Rip Saw;Specifications: -- 20 HP Main motor. -- 24"; throat capacity. -- Max. cutting height: with 12" blade 3", with 16" blade 4". -- Min. diameter of circular saw blades: 8". -- Max. dia. of circular saw blades: 16". -- Min. length of working pieces: 10". -- Variable feed speed from 50 -154 Ft./minute. -- Feeding belt width: 11". -- Spindle Speed: 4,500 RPM. -- 36"; x 60"; table.Equipped with & Features: -- Fence and rail system with one stop. -- Infeed table row of anti-kick back fingers. -- Steel smooth top hold down roller. -- Top row of anti-kick back fingers. -- Steel smooth top hold down roller. -- Split hold down steel smooth roller around blade. -- Split hold down steel smooth roller around blade. -- Steel smooth top hold down roller. -- Chain is in excellent condition!

There are (5) saws available that range in age from: - 2006 (2) - SOLD - 2007 - SOLD - 2011 - One saw available

Ogden SL3660 RFS

(2) - 30" Dia. steel discs, 5 HP double shafted motor turns @ 1,050 RPM; (2) steel side tables 40" x 15", (1) slotted and (1) plain, both tables tilt 10ø up and 45ø down, (1) table has 6" manual vertical adjustment; rack travel adjustment by screw and crank. -- Complete with: Magnetic controls, (2) dust outlets and large hand wheels for easy adjustments.

OLIVER 232 Table Saw w/BIESEMEYER FenceSpecifications: -- 12" Blade, 1" dia. tilting arbor 0° - 45°, 2 HP - 3,600 RPM belt driven arbor, 22" max. rip cap., 2-3/8" max. depth @ 90°, 1-7/8" max. depth @ 45°, max. dado width 13/16", 34-3/4" x 33-3/4" cast iron table, 34" table height. -- Complete with: -- BIESEMEYER Fence; 1-piece cast iron 25" square base; electric disconnect box & magnetic push button starter and small selection of saw blades.

OLIVER 4045 12" PROFESSIONAL TABLE SAW, with 36" FenceHeavy-duty cast iron table precision ground for accuracy; rugged machine frame construction provides maximum stability and reduced vibration.Specifications: -- 12" Blade capacity and 0° - 45° tilting arbor with digital read-out. -- 7.5 HP Motor at 3,450 RPM. -- Complete with: 52" rip fence capacity that will handle most of your work. -- 48" x 52" Cast iron table. -- Blade guard, miter gauge, push-button controls. -- Parts list & operation manual.

OLIVER 4016 10" Table Saw, 5 HP, 3-Ph w/36" Rail Specifications: -- 5 HP motor; poly V-belt drive system with belts that run smoother and with less vibration, giving you the highest quality cut available. -- Top it all off with with OLIVER'S Optimus square tube fence and a digital blade angle readout system and you've got a saw that tears it up with accuracy and in style! -- Model 4016.004 5 HP, 220V. 3-Phase.

OLIVER 6910 Oscillating Spindle SanderPedestal style Spindle Sander constructed for rugged use .Specifications: -- 2 HP Motor drives and is connected through a flexible coupling, and can be installed or removed without disturbing the drive mechanism. -- Spindle speed 1,725 RPM, Oscillation speed 75 Cy/Min with 1-1/2" stroke length. -- Spindle quill runs in precision ball bearings, oscillated by a heavy duty worm & gear mechanism running in a bath of oil. -- (10) Spindle sizes provided: 1/4 x 5", 3/8 x 6", 1/2 x 6", 5/8 x 6", 3/4 x 9", 1 x 9", 1 1/2 x 9", 2 x 9", 3 x 9" and 4 x 9"; 100 grit abrasive sanding sleeve with each spindle. -- Large 24" x 24" precision ground cast iron table mounted on large trunnions that can be tilted 45° down and 30° up by use of a convenient handwheel. -- Complete with: Pedestal style stand.