Woodworking Equipment For Sale

OSI - 9000, ...High Speed End Matcher.Double-sided End Matcher for tongue & groove.Features: -- Squareness accuracy of +/- 0.001"; (0.025 mm) per inch of board’s width. -- Automatic jumping saw system for split out free groove machining. -- 2-Axis bases for saws with 0.001"; (0.025 mm) adjustable increments. -- High precision cast iron chains machined from a solid round bar. -- Drive sprockets: 2-1/4"; (57 mm) Thick steel reversible replaceable teeth. -- Each saw motor is customized by OSI to satisfy superior precision standards. -- Most accurate micro bevel (micro-V) on the market. -- Accurate chain lubrification system. -- Shaft-mounted gear motor -- Heavy-duty steel heads, stress relieved, and machined -- Enclosed heads for vacuum efficiencyTechnical Specifications: -- Maximum feed speed: 95 FPM -- Board thickness 5/8" to 1-1/2" -- Minimal length 8" -- Maximum length: 84" -- Log spacing: 8" -- Maximum width: 5-1/4"Also included: -- Approx $10,000 of spare parts -- Tear down and loading

Single End Tenoner that will handle straight or curved material. Carves round ended tenons through the use of (2) worktables which independently slide on steel rails. Tables independently adjustable for height and tilt Max width 100mm Max thickness 30mm Max Depth 50mm Table adjustment (vertical) 100mm Tilting 20^ front 15^radial Fence 45^ Spindle motor 2.25KW (3HP) (2) dust hoods Weight 960KG Dims 1320 x 1120 x 1250 mm 230 volt 3phase

PANHANS 436 24'' SINGLE SURFACE PLANER: -- Specifications:24.8" (630 mm) Width x 1/8" to 10" opening, 10 HP Motor, 4-knife - 4-3/4" dia. cutter-head belt driven @ 5,000 RPM, max. cutting depth 5/16". -- 1 HP Feed motor with (2) feed speeds 22 - 44 FPM. Segmented rubber-covered infeed and outfeed rollers, sectional chip breaker, motorized raise-and-lower of bed w/LED readout, table size 43" x 21". -- Options Include: (16) Cutter knives: Power lift up and down. -- Complete with: Emergency stop, magnetic starter w/overload protection, knife setting gauge & 5-1/2" dia. dust hood; incl. operations manual, parts list and tool kit.

Paul AB920 Rip Saw Scanning Fenceless Infeed Infeed & Outfeed (not including decks) The machine has one fixed and 2 moving blades. The minimum distance between the moving blades is 44 mm (1.73"). The maximum distance between the moving saw blades is 210 mm (8-1/4"). The machine is designed for incoming boards with the following min./max. dimensions Length: 4' - 16' Width: 2" - 19" Ripped widths: 1.75" - 8" Thickness: 1" - 2" 480 Volt, 60 hz., 3 phase electrics 75 HP main motor Automatic edging separation after the saw Feed speed up to 300 fpm Fenceless infeed system with automatic skewing capability 16 width sensors on the infeed system

4 Head drill station 20' with powered roll case Hydraulic set stops

-In Auction- PHELPS FAN 30 HV-1 7-1/2 HP Material Handling Blower Specifications: -Inlet dia. 18". -Outlet size 7" x 14-1/2". -Speed 1,900 RPM. Equipped with: -7-1/2 HP - 1,755 RPM - 230/460 V Dual voltage TEFC premium efficiency inverter duty motor, Certified for hazardous locations.

Pillar MMTJ Miter Door Machine

Pinheiro MF/EF 630 Top and Bottom Planer

The seller has confirmed that this Pinheiro planer is in good working/running condition. - Double sided planer with side saw - Complete package - Manual - no year...Motor HP 20 bottom, 10 top

12” blades 1-1/2 HP motors - 3 phase foot pedal control

(2) 2-1/2 HP motors 5/8” arbors 12” blade capacity max width 3 - 5/16” nax depth 2-5/8”

PISTORIUS HM-1-S VERTICAL HAUNCHING MACHINEVertical hauncher/notcher with 7-1/2 HP drive motor and high speed spindle with 1-1/4" arbor dia. x 4" long, with maximum Cutter Diameter of 8 inch.Features: Heavy-duty precision linear bearing ways, pneumatically operated via foot pedal activation.

PMK C 1205 Single End Coping Machine -- With the C-1205 Coping Machine you can run your Styles first or run your cope first, this machine using a 7.5 HP motor has counter rotating spindles to insure Chip free coping of either square. -- Single profiled or double profiled parts. Since we are only coping one end at a time the length doesn't matter. We can also cope more than one part at a time up to 13.5" wide on the C-1205. -- Two counter-rotating spindles 1.25" in Diameter. -- Capacity of maximum (2) cutters on stack tooling -- Spindle Speed 7,000 RPM; cycle time approx. (4) Seconds. -- Side Pressure Clamp to insure proper alignment with a fence. -- Cutter Heads totally enclosed for Safety!

PMK C 1203 Single End Coping/Tenoning Machine -- With the C-1203 Coping Machine you can run stiles first or cope first, this machine using a 5 HP motor has counter rotating spindles to insure chip free coping of either square, single profiled or double profiled parts. -- Since we are only coping one end at a time the length doesn't matter. We can also cope more than one part at a time up to 9.5" wide on the C-1203. -- (2) Counter rotating spindles 1.25" diameter. -- Spindle Speed 7,000 RPM; cycle time approx. (4) seconds. -- Side Pressure Clamp to insure proper alignment with fence. -- Cutter Heads totally enclosed for Safety!

Pneumafil 13.5 460-10 304 Stainless Steel Reverse Air Bag House, 5,922 SQ/FT Cloth Media, 47,000 CFM @ 8:1 Air/Cloth Ratio, Very Good Condition, $82,000.00

Porter Planer Model 700 S/N 5916, Straight Knifes 10HP Motor

Porter 715-A Top surface planerPorter Surfacemaster 715 Planer is ideal for for flattening and prepping lumberSpecifications -- 15HP, 3PH, 230/460V --3/4HP Elevation Motor -- Chain Driven Carpet Feed -- 24″ Wide Cutterhead with Dispozablade Knives(Comes with ITCH head as a alternate option) -- 8" Max Thickness Capacity -- Power Elevation -- Wixey Thickness DRO -- Spike InfeedEquipped with & Features -- Magnetic Start/Stop -- 6" Dust PortWeight is approx 6500lbsNOTE: This surfacer is a beast, and will operate with very little vibration due to its large cast iron frame. These machines are known to make chips, and are excellent for prepping or surfacing lumber. Machine was used prior in a cabinet shop, and is being sold as it was replaced with a double side planer.

Porter 165 Double Sided Buck Shaper --4" Long spindle --, 8" vertical & 5" horizontal travel, interchangeable 3/4" spindle, -- 3 HP motor, 12,000 - 18,000 RPM.Will also include a Grizzly HP G4181 power feeder.

Accepts 3/4", 1", & 1-1/4" Dia. interchangeable spindles, 5.5 HP motor; 3,625 - 5,000 - 7,250 - 10,000 Spindle speeds. -- 4" Cap. under nut when using the 1-1/4" spindle, 6-19/64" spindle stroke; Approx. 39-1/2" x 31-1/2" extra thick cast iron main table, -- Complete with: Adjustable split fence, spring hold downs, removable table inserts, dust collection shroud, reversing switch, spindle brake, and cutterhead guard. -- Includes: Infeed and outfeed tables shown in picture. - Note: Needs some work on bearings.

POWERMATIC 26 SINGLE SPINDLE SHAPER -- Specifications: 5 HP (3.7 kW) - 3,600 RPM belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley, with reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" Cap. under the nut and 3" spindle travel w/hand wheel adjustment -- Complete with:24" x 26" Cast iron table w/miter slot, 7" insert opening, adjustable fence, and Magnetic controls. -- Actual Model is POWERMATIC 26