Woodworking Equipment For Sale

Powermatic Model 221 Planer

Accepts 3/4", 1", & 1-1/4" Dia. interchangeable spindles, 5.5 HP motor; 3,625 - 5,000 - 7,250 - 10,000 Spindle speeds. -- 4" Cap. under nut when using the 1-1/4" spindle, 6-19/64" spindle stroke; Approx. 39-1/2" x 31-1/2" extra thick cast iron main table, -- Complete with: Adjustable split fence, spring hold downs, removable table inserts, dust collection shroud, reversing switch, spindle brake, and cutterhead guard. -- Includes: Infeed and outfeed tables shown in picture. - Note: Needs some work on bearings.

POWERMATIC 26 SINGLE SPINDLE SHAPER -- Specifications: 5 HP - 3,600 RPM belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley, with reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" Cap. under the nut and 3" spindle travel w/hand wheel adjustment -- Complete with: 24" x 26" Cast iron table w/miter slot and 7" insert opening. -- Equipped with: Adjustable Fence, and Magnetic controls, 4-Roll 4-speed Power Feeder .

POWERMATIC Shaper TS-29, with Sliding Table & Tilting SpindleSpecifications: -- 3/4", 1", & 1-1/4" Dia. interchangeable tilting spindle, 3/8" & 1/2" collet & router bit adapters, tilts 45° forward and 5° back, 7-1/2 HP - 3,600 RPM motor; 3,000 - 4,000 - 6,000 - 8,000 - 10,000 RPM spindle speeds via 4-step V-pulley with "quick release". -- 4-3/4" Cap. under nut when using the 1-1/4" spindle, 7-1/16" spindle travel; 51-1/2" x 33-1/2" extra thick cast iron main table, (3) removable table inserts 2-1/2" - 5-1/2" & 5-7/8" x 4-3/16" (oval).Complete with: -- Large scale "ACCU Fence" with integrated 4" dust collection shroud, reversing switch, AMBI-TECH electronic brake, cutterhead guard, clamping miter gauge & magnetic control; incl. owners manual & parts list. Actual Model # 1791284

POWERMATIC Shaper PM 2700, Spindle Shaper model 128-0102C 5 HP, Single Phase, 230 V - 1280101-CSpecifications & Features: -- Digital readout gives the use of exact spindle height and allows for 0.001" adjustments. -- 4" Spindle travel. -- 5 HP Motor -- Heavy-duty 30" x 40" precision ground tabletop for smooth stock feeding and Heavy-duty cast iron base. Includes: -- 3/4" and 1-1/4" spindles -- Independently adjustable fence sides. -- Micro-adjust control knobs allow for precision adjustment for the fence. -- Integrated casters can be raised and lowered to mobilize shaper. -- Superior clear cutter guard promotes safety, allows observation of the entire cut. -- Table predrilled and tapped for Power Feeder mounting.Dust Collection Minimum CFM Required (CFM) 600; 4"Dust Port Outside Diameter

20" Dia. dynamically balanced aluminum disc, 3 HP - 1,740 RPM direct drive motor; 15" x 27-1/4" table w/miter gage slot, tilts 30° upward & lowers 45° downward, 90° positive table stop; rack mechanism for raising & lowering table by hand crank, heavy bolt-down steel base. Complete with reversing switch and miter gauge. Also available in Single-phase in 2 HP motor.

POWERMATIC WB-25 WIDE BELT SANDER1-Head, 25" width capacity, 1/8" to 6" thickness capacity. Combination sanding head with 4" dia. rubber covered contact roll & 2" wide polishing platen, micro-adjust platen. steel abrasive belt tension roll and steel idler roll. 25" X 75 abrasive belt capacity. Equipped with: -- 15 HP Three-phase main motor, 1 HP variable feed motor, 15-49 FPM. -- 1/4 HP table raising and lowering motor with Auto adjust thickness assist, 1/8" to 6" opening with (4) screw jacks. -- Double infeed & outfeed rubber covered holddown rolls. -- Complete with: -- Digital readout, air eye belt sensing, limit switch overtravel protection, magnetic starter, overload protection, load meter and emergency brake; includes owner's manual & parts list.

POWERMATIC RB-37 SINGLE HEAD WIDE BELT SANDER1-Head, 36" width cap., combination sanding head with 4" dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size 37" x 60", with air tensioning, air jet abrasive belt tracking; 1 HP feed drive, variable feed speed of 15 - 30 FPM conveyor speed, 0" to 5-1/4" opening with (4) screw jacks, double infeed & outfeed rubber covered holddown rolls. -- Complete with: Magnetic starter, overload protection, load meter and emergency brake.

TABLE SAW TOP MEASURES 44" WIDE X 76 ½" LONG TABLE HEIGHT FROM FLOOR 34% " COMES WITH 5 - 12" DADO BLADES 1 HORSE POWER POWERMATIC MATERIAL FEEDER 5 HORSE POWER SAW ARBOR MOTOR 440 VOLT 3 PHASE

POWERMATIC 26 SINGLE SPINDLE SHAPER -- Specifications: 5 HP (3.7 kW) - 3,600 RPM belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley, with reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" Cap. under the nut and 3" spindle travel w/hand wheel adjustment -- Complete with:24" x 26" Cast iron table w/miter slot, 7" insert opening, adjustable fence, and Magnetic controls. -- Actual Model is POWERMATIC 26

POWERMATIC 28 SHAPER1-1/4" Dia. spindle, 7.5 HP - 3,600 RPM motor; with 3,300 to 9500 RPM spindle speeds via Factory installed Variable frequency Drive. 4-3/4" Cap. under nut when using the 1-1/4" spindle, spindle brake, 30" x 39" table.

POWERMATIC MODEL 100 PLANER12" Cap., 5 HP 5,300 RPM belt driven main motor, 1/16" to 5" thickness opening, 3-1/8" dia. 3-knife cutterhead with high speed steel knives, 18 FPM fixed feed speed with in-out clutch -- Corregated infeed rolls; 12" x 24" precision ground cast iron table. 1/4" max. depth of cut, 7-1/2" min. stock length (unbutted). -- Complete with: Knife grinder, Magnetic controls, cutterhead guard with dust chute on enclosed steel stand.

Powermatic Model 100 12" Planer 3 Phase power

Powermatic OES9138 Oscillating Edge Sander Includes: (5) Sander belts

Powermatic TS 80 Shaper Call 800-459-2148 for more info.

1 HP tenoner Approx. 2HPsaw Approx 28" x 16" table

Producto Gothic Fence & Post Picket Machine. Out and Ready to ship. Producto is now Global Marketing Group.

PROFILEMATIC 503 PROFILE SANDER3-Head feed through, sands from top at adjustable angles narrow moulding type parts as well profiled edges on panels.Equipped with: -- (3) Top VPS vibrating air-loaded sanding units, 0.5 HP vibrating motor ea., sanding heads have (2) pneumatic cylinders for sanding pressure control and oscillate with 1/2" stroke on dust-protected round guides, variable vibration speed from 200 - 1,800 RPM; adjustment range of 120ø to conform to profile, equipped with air shower to clean workpiece & sandpaper automatically. -- Part transport is achieved by a 4-1/2" wide linatex coated conveyor belt system, "quick adjustment" holddown wheels & fence system, variable feed speed 0 - 35 FPM powered by a 0.25 HP DC gear drive (forward & reverse feed mode). -- Each sanding head with its own controls for manual raise & lower, pressure control and vibrating speed. Profile width approx. 1/2" min. to 4" max., material feed through thickness up to 5"; support fences for up to 10" moulding width.

2 HP motor,220V, 3 PH, 60 HZ -- V-belt drive, Allen Bradley push button overload control. -- Seller recommends replacing rubbers & covers.

Progressive Systems Inc End Matcher