Woodworking Equipment For Sale

POWERMATIC 28 SHAPER1-1/4" Dia. spindle, 7.5 HP - 3,600 RPM motor; with 3,300 to 9500 RPM spindle speeds via Factory installed Variable frequency Drive. 4-3/4" Cap. under nut when using the 1-1/4" spindle, spindle brake, 30" x 39" table.

Powermatic 72 Table Saw In good working condition. - HP: 5 - Machine Size: 12-14 Inch - Serial No: 8572038 Shipping Specs with Pallet: - 970 Pounds - 57" Length - 84" Width - 49" Height Call 800-459-2148 for more info.

Powermatic TS 80 Shaper Call 800-459-2148 for more info.

Gently used Powermatic planer for sale. Call 800-459-2148 for more info.

Powermatic Model 100 12" Planer 3 Phase power

1 HP tenoner Approx. 2HPsaw Approx 28" x 16" table

Powermatic Model 221 Planer

Powermatic OES9138 Oscillating Edge Sander Includes: (5) Sander belts

POWERMATIC WB-25 WIDE BELT SANDER1-Head, 25" width capacity, 1/8" to 6" thickness capacity. Combination sanding head with 4" dia. rubber covered contact roll & 2" wide polishing platen, micro-adjust platen. steel abrasive belt tension roll and steel idler roll. 25" X 75 abrasive belt capacity. Equipped with: -- 15 HP Three-phase main motor, 1 HP variable feed motor, 15-49 FPM. -- 1/4 HP table raising and lowering motor with Auto adjust thickness assist, 1/8" to 6" opening with (4) screw jacks. -- Double infeed & outfeed rubber covered holddown rolls. -- Complete with: -- Digital readout, air eye belt sensing, limit switch overtravel protection, magnetic starter, overload protection, load meter and emergency brake; includes owner's manual & parts list.

TABLE SAW TOP MEASURES 44" WIDE X 76 ½" LONG TABLE HEIGHT FROM FLOOR 34% " COMES WITH 5 - 12" DADO BLADES 1 HORSE POWER POWERMATIC MATERIAL FEEDER 5 HORSE POWER SAW ARBOR MOTOR 440 VOLT 3 PHASE

POWERMATIC RB-37 SINGLE HEAD WIDE BELT SANDER1-Head, 36" width cap., combination sanding head with 4" dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size 37" x 60", with air tensioning, air jet abrasive belt tracking; 1 HP feed drive, variable feed speed of 15 - 30 FPM conveyor speed, 0" to 5-1/4" opening with (4) screw jacks, double infeed & outfeed rubber covered holddown rolls. -- Complete with: Magnetic starter, overload protection, load meter and emergency brake.

20" Dia. dynamically balanced aluminum disc, 3 HP - 1,740 RPM direct drive motor; 15" x 27-1/4" table w/miter gage slot, tilts 30° upward & lowers 45° downward, 90° positive table stop; rack mechanism for raising & lowering table by hand crank, heavy bolt-down steel base. Complete with reversing switch and miter gauge. Also available in Single-phase in 2 HP motor.

POWERMATIC MODEL 100 PLANER12" Cap., 5 HP 5,300 RPM belt driven main motor, 1/16" to 5" thickness opening, 3-1/8" dia. 3-knife cutterhead with high speed steel knives, 18 FPM fixed feed speed with in-out clutch -- Corregated infeed rolls; 12" x 24" precision ground cast iron table. 1/4" max. depth of cut, 7-1/2" min. stock length (unbutted). -- Complete with: Knife grinder, Magnetic controls, cutterhead guard with dust chute on enclosed steel stand.

Producto Gothic Fence & Post Picket Machine. Out and Ready to ship. Producto is now Global Marketing Group.

PROFILEMATIC 503 PROFILE SANDER3-Head feed through, sands from top at adjustable angles narrow moulding type parts as well profiled edges on panels.Equipped with: -- (3) Top VPS vibrating air-loaded sanding units, 0.5 HP vibrating motor ea., sanding heads have (2) pneumatic cylinders for sanding pressure control and oscillate with 1/2" stroke on dust-protected round guides, variable vibration speed from 200 - 1,800 RPM; adjustment range of 120ø to conform to profile, equipped with air shower to clean workpiece & sandpaper automatically. -- Part transport is achieved by a 4-1/2" wide linatex coated conveyor belt system, "quick adjustment" holddown wheels & fence system, variable feed speed 0 - 35 FPM powered by a 0.25 HP DC gear drive (forward & reverse feed mode). -- Each sanding head with its own controls for manual raise & lower, pressure control and vibrating speed. Profile width approx. 1/2" min. to 4" max., material feed through thickness up to 5"; support fences for up to 10" moulding width.

2 HP motor,220V, 3 PH, 60 HZ -- V-belt drive, Allen Bradley push button overload control. -- Seller recommends replacing rubbers & covers.

Progressive Systems Inc End Matcher

PROSAND HF-412 Curved Part Belt SanderBelt oscillates up and down.÷Feed wheel removable.

CASADEI (PUTSCH-BRANDED) EBP-320 Compact Edgebander – New, Never Used! – 3-PhaseSpecifications: -- Edgebanding thickness 0.4 to 2 mm (0.02" - 0.08"). -- Max. coil dia. 600 mm (23.62"). -- Panel thickness 10 - 45 mm (0.39" - 1.77"), Min. panel width 110 mm (4.33"), Min. panel length 220 mm (8.66"). -- Feed speed 7 MPM (22 FPM).Equipped with: -- 3-Position Infeed fence, 0 mm, 1 mm, & 2 mm. -- 1 kg (2.2 Lbs.) Cap. Teflon-coated glue pot, (6) Heating elements, & Thermostatic glue control with Automatic standby & Temperature display. -- Pneumatic guillotine. -- Pressure section, (1) Silicone roll & (2) Nylon rolls. -- 0.8 HP Feed belt motor. -- PLC Control, with Backlit LCD display & Touchpad. -- Sound enclosure, Outrigger panel support.Workstations: -- Front & Rear End Trim Unit. -- Top & Bottom Flush Trim Unit, with (2) 0.37" kW (1/2 HP) - 10,300 RPM Motors, Straight or Bevel cutters, & 75 mm (2.95") Dia. Cutterheads with Knife inserts for 2 mm (0.08") Radius or 15° Bevel.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP 420 PMVR Compact Edgebander – New, Never Used!Specifications: -- Edgebanding thickness: 0.4 - 3 mm (0.02" - 0.12") Coil, 0.4 - 5 mm (0.02" - 0.20") Strip with Manual Feed. -- Max. coil dia. 800 mm (31.50"). -- Panel thickness 8 - 45 mm (0.31" - 1.77"), Min. panel width 95 mm (3.74"), Min. panel length 210 mm (8.27"). -- Feed speed 7 MPM (22 FPM).Equipped with: -- Pre-mill unit, with (2) 0.75 kW (1 HP) - 12,000 RPM - 200 Hz Motors, Counter-rotation, Max. milling adjustment 2 mm (0.08"), & Dedicated extraction system with Blower. -- Anti-adherence spraying unit, with PLC-Controlled spray function, Lower & Upper Sprayer, and Liquid tank. -- 1 kg (2.2 Lbs.) Cap. Teflon-coated glue pot, with (6) Heating elements, & Thermostatic glue control with Automatic standby & Temperature display. -- Pneumatically-operated guillotine. -- Pressure section. -- Feed chain pads, with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers. -- PLC Control, with Backlit LCD display & Touchpad. -- Safety enclosure.Workstations: -- VR Front & Rear End Trim Unit, with 0.22 kW (0.3 HP) - 2,700 RPM Motor, Vertical rounding function, & (2) Processing modes: Straight (thin edges & wooden strips) & Radius (ABS & PVC thick edges). -- Top & Bottom Flush Trim Unit, with (2) 0.22 kW (0.3 HP) - 12,000 RPM - 200 Hz Motors, 75 mm (2.95") Dia. Cutterheads, & 2 - 3 mm (0.08" - .012") Radii. -- Edge Scraping Unit, with Box. -- Top & Bottom Scraping Unit (Flush Trim Unit), with 120 mm (4.72") Vertical disc copier. NOTE: Sold "As-Is" Without Warranty!