Woodworking Equipment For Sale

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i64 JYDEN 4 M Motorized Miter Trimmer Complete with: 4-1/2” x 37” x 33-1/2” H Infeed.

Year: 1999 Fully automated door lite cutting system for high volume production. Equipped with: Handler automatic door loader draws from two door stacks, – DL-NCA programmable automatic door lite cutter – Dual heads for quick change between steel and fiberglass, – EP-1 automatic edge prep machine bores for latch and mortises faceplate pocket.

Specifications: - Working Width: 15 - 230 mm (19/32 to 9-1/16 inches) - Working Height: 6 - 150 mm (1/4 to 5-29/32 inches) - Spindle Speed: 6,000 RPM - Spindle Dia: 40 mm - Clamping Length of horiz. and universal spindles: 235 mm - Clamping Length of vertical spindles: 160 mm - Feed Speed (variable): 6-24 m/min (19-80 fpm) - Diameter of Feed Roller: 140 mm (5-1/2 inches) - Diameter of Table Rollers: 100 mm (4 inches) - Width of feed rollers: Shaft mounted to 9 inches - Width of rollers opposite left spindle: Stackable to 6 inch Head Power: - First head: 10 HP - Second head: 7.5 HP - Third head: 7.5 HP - Fourth head: 15 HP - Fifth head: 10 HP Additional notes: - Driven roller outfeed table: Smooth Steel - Driven table before first bottom spindle: Serrated Steel - Top Chipbreaker shoes: Dual receding (spring), Smooth - Manual lubrication pump - Tables and fences: Hardened Smooth Chrome Total Weight unskidded: 8,375 lbs.

// This machine is in an Auction on exfactoryauctions.com// // Link to Machine: http://exf.ac/i4o KENTWOOD R 340 E 14" Dip Chain Gang Rip Saw, with ADVANTAGE RIP 1 Infeed, Saw & Infeed Installed New in 2010 Specifications: Arbor cap. 13". Max. blade dia. 14". Stock thickness 1/2 - 4.3". Min. stock length: 21.3" with Pressure Plate & 15.8" without Pressure Plate. Max. pass through width 25". Arbor Diameter 2.17". Feed speeds 15 - 130 FPM. Equipped with: 50 HP - 1,720 RPM Motor. Automatic chain lubrication. 2.2 kW (3 HP) Feed motor. ? Anti-kickback fingers. Mobile pedestal control, with Touchscreen & Dual control sticks. Complete with: 2009 KENTWOOD "ADVANTAGE RIP 1" 19-1/4” x 151” x 37-1/2” H Infeed Powered Roller Conveyor, S/N 0980002, with 2 HP Motor, 3-1/2” Rollers, 5-3/4” Dia. Rubber-covered pneumatic hold-down wheels, & 16-1/2’ L x 4-1/4” H Fence. (3) Lasers. Machine & Infeed Conveyor Dimensions: 270" x 68" x 66" H. Control Dimensions: 20" x 18" x 44" H. Machine Weight: 5,000 Lbs. Infeed Weight: 750 kg (1,655 Lbs.)

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i4p KENTWOOD M612HD 12” W x 6” H 6-Head Feed Through Moulder, with Tooling Specifications: B-R-L-T-T-B. Working width 15 - 300 mm (0.59” - 11.81"), Working thickness 15 - 150 mm (0.59” - 5.91"). Spindle diameter 1-13/16". Spindle speed 6,000 RPM. Variable feed speeds 6 - 36 MPM (20 - 118 FPM). Equipped with: Head Sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 25 HP, Top 25 HP, & Bottom 25 HP Motors, with Electronic brakes. Motorized spindle positioning of Heads #4 & #5, with LED Readout. Outboard bearings on Heads #1, #4, #5, & #6. Mechanical readouts for pressure elements & chip breakers, All chip breakers & pressure elements with Pneumatics. Inverter-driven feed system. Electronic interlocking feed height adjustment. (1) Serrated powered table rollers, (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. 13-1/2” x 88” x 38-1/2” H Chromed infeed table, with 8-1/2’ L 7/8” H Fence & Side pressure roller, Side pressure roller mounted at infeed. Central lubrication. Manual table lubrication pump. Full sound/safety enclosure. Remote pendant control. Complete with: Accessories & Tooling.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i4q KENTWOOD M609HD 9” W x 6” H 6-Head Feed Through Moulder, with Tooling Specifications: B-R-L-T-T-B. Working width 15 - 229 mm (0.59” - 9.02"), Working thickness 15 - 150 mm (0.59” - 5.91"). Spindle diameter 40 mm (1.57”). Spindle speed 6,000 RPM. Variable feed speeds 6 - 36 MPM (20 - 118 FPM). Equipped with: Head Sequence: Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 25 HP, & Bottom 30 HP Motors, with Electronic brakes. Outboard bearings on Heads #1, #4, #5, & #6. Mechanical readouts for pressure elements & chipbreakers, All chipbreakers & pressure elements with Pneumatics. Inverter-driven feed system. Electronic interlocking feed height adjustment. (1) Serrated powered table roller before 1st Head, (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. 10-1/2” x 65-1/2” x 39” H Chromed infeed table, with 7’ L 7/8” H Fence & Side pressure roller, Side pressure roller mounted at infeed. Central lubrication. Manual table lubrication pump. Full sound/safety enclosure. Remote pendant control. Complete with: Accessories & Tooling.

KENTWOOD M612HD 12"; W x 6"; H 6-Head Feed Through Moulder, with ToolingSpecifications: -- B-R-L-T-T-B. -- Working width 15 - 300 mm (0.59"; - 11.81"), Working thickness 15 - 150 mm (0.59"; - 5.91"). -- Spindle diameter 1-13/16". -- Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 36 MPM (20 - 118 FPM).Equipped with: -- Head Sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 25 HP, Top 25 HP, & Bottom 25 HP Motors, with Electronic brakes. -- Motorized spindle positioning of Heads #4 & #5, with LED Readout. -- Outboard bearings on Heads #1, #4, #5, & #6. -- Mechanical readouts for pressure elements & chip breakers, All chip breakers & pressure elements with Pneumatics. -- Inverter-driven feed system. -- Electronic interlocking feed height adjustment. -- (1) Serrated powered table rollers, -- (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. -- 13-1/2"; x 88"; x 38-1/2"; H Chromed infeed table, with 8-1/2’ L 7/8"; H Fence & Side pressure roller, Side pressure roller mounted at infeed. -- Central lubrication. -- Manual table lubrication pump. -- Full sound/safety enclosure. -- Remote pendant control.Complete with: -- Accessories & Tooling.

KENTWOOD M 609X Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 9-1/16"" x 6". Head sequence & Spindles: -- Bottom 10 HP, right 10 HP, left 10 HP, top 20 HP, top 20 HP and bottom 15 HP motor. -- Spindle dia.1 13/16" with cutterhead speed of 7,200 RPM. -- All spindles equipped with mechanical digital readouts. Mechanical readouts for pressure elements and chipbreakers.Electric brakes on spindles 2 through 5, Cutting circle of vertical spindles: 125 mm to 200 mm (4,7" X 7.8") Cutting circle of horizontal spindles: 125 mm to 200 mm (4,7" X 7.8"). Feed works: -- Cardan feed-works drive system with pneumatic pressure rollers, Inverter driven 5 HP feed system with feed speeds of 20 - 98 FPM. Infeed. -- Complete with: Full width driven bottom in-feed roller before first head, Serrated steel feed rollers before top horizontal head.Rubber coated feed rollers after top horizontal head, (2) Rollers above and (1) in the table prior to first bottom spindle; (2) additional powered rollers in the table. -- In-feed table 2M (72"), chromed tables and fences. Includes: -- Central lubrication, manual table lubrication pump. -- Side pressure roller mounted to infeed table, Short stock attachment at right spindle for short part, -- Sound enclosure and Interior cabin light. Note: Floor space: 77" W x 166" L x 68" T, Machine weight: 10,800 lbs.

KENTWOOD M609HD 9"; W x 6"; H 6-Head Feed Through Moulder, with ToolingSpecifications: -- B-R-L-T-T-B. -- Working width 15 - 229 mm (0.59"; - 9.02"), Working thickness 15 - 150 mm (0.59"; - 5.91"). -- Spindle diameter 40 mm (1.57";). -- Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 36 MPM (20 - 118 FPM).Equipped with: -- Head Sequence: Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 25 HP, & Bottom 30 HP Motors, with Electronic brakes. -- Outboard bearings on Heads #1, #4, #5, & #6. -- Mechanical readouts for pressure elements & chipbreakers, All chipbreakers & pressure elements with Pneumatics. -- Inverter-driven feed system. -- Electronic interlocking feed height adjustment. -- (1) Serrated powered table roller before 1st Head, -- (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. -- 10-1/2"; x 65-1/2"; x 39"; H Chromed infeed table, with 7’ L 7/8"; H Fence & Side pressure roller, Side pressure roller mounted at infeed. -- Central lubrication. -- Manual table lubrication pump. -- Full sound/safety enclosure. -- Remote pendant control.Complete with: -- Accessories & Tooling.

KENTWOOD M 609 Moulder6-Head (B-R-L-T-T-B), working cap. 9-1/16"" x 6". -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- All spindles equipped with mechanical digital readouts. Mechanical readouts for pressure elements and chipbreakers. -- Feed works: Inverter driven 5 HP feed system with feed speeds of 20 - 100 FPM. Infeed Complete with: (2) Rollers above and (1) in the table prior to first bottom spindle. -- Infeed table 2M (6'6"), chromed tables and fences. -- Includes: Central lubrication, manual table lubrication pump, side pressure roller mounted to infeed table and sound enclosure. -- Additionally equipped with: Short stock attachment at right spindle for short parts.

KIKUKAWA - RP-12, ...Straight Line Rip SawSpecifications: --10 HP Arbor motor. -- 12" Blade cap. -- 18" Throat, 2-3/8" max. stock thickness. -- Variable speed from 75 - 150 FPM; 2 HP feed motor. -- Saw blade mounted overhead. -- Table size: 39" x 57".Equipped with & Features: -- Magnetic controls. -- (2) Sets of antikickback fingers. -- Automatic lubrication mechanism.Special Note: Rip Saw taken from service. Runs good glue line; OK for soft woods and surfaced materials. Does not do a good glue line on rough or semi-rough material. This is a Japan-built Saw, and they are built well with a small footprint .

KILLINGER KM-150 Bench-Top Flute & Barley Twist Machine for Right & Left-Hand Barley Twists & Straight FlutingsSpecifications: -- Maximum workpiece diameter 200 mm (7.87"), Maximum milling length 1,650 mm (64.96").Equipped with: -- 24-Position Indexing plate.Complete with: -- Legs.NOTE: No Router.Dimensions: 81" x 19" x 48" H.Weight without Legs: 110 Lbs.

This Kimwood Panel Master Sander is in good working/running condition and it is ready to load! - 48" Feed - Feed speeds up to 200 lineal feet per minute - (2) opposing heads - 250HP - (2) operator control panels - Many spare parts including sanding belts

Komo VR512 CNC Router Fanuc Controls SN 24129-03-01-93 Quincy Vacuum Pump

Komo VR508 CNC Router 60" x 120" Table 25 HP Sullair Vacuum Pump Dust Collector (10 or 15 HP - need to confirm) (2) Two main router heads with Quick Change (2) Vertical Drill Units (1) 8 HP 10" Saw Fanuc Control

Table Configuration: • KOMO VR 512 Mach I CNC Router • 60 x 144" Cast aluminum machined vacuum table • Table has been designed for High Flow vacuum pump • Ideal for nested based manufacturing • Heavy Duty fixed Gantry Bridge • A-Frame style Gantry Support legs • Pop up part locating pins (set of three pins) Head Configuration: • 12 HP High Frequency 4-pole Router Spindle • Programmable spindle speeds from 9,000 - 18,000 RPM • 8-Position Dynamic tool changer with BT-30 tool holders • (6) Vertical drill spindles on 32 mm centers • (4) Horizontal boring spindles with 1 + 1opposing in the X-axis and 1 + 1opposing in the Y-axis Positioning: • All axes are positioned by AC Servo Drives • Heavy Duty Profiled machine rails and bearing trucks • Preloaded precision ball screws for positioning • Automatic Lubrication system to all bearings • Rapid travel speeds of 1,250 IPM on both the X and Y-axes • Travel speeds of 600 IPM on the Z-axis Controller: • FANUC 210i PC Front end Controller • Windows Operating system • RS-232 Serial interface • 3-axis simultaneous control • Feed rate override • Spindle speed override • Hand help pendant • Remote operating pedestal with vacuum and cycle start buttons, pop up pins, as well as emergency stop.

KOMO MHS AUTOMATIC VACUUM PANEL FEEDER: -- Specifications: Single vacuum Infeed & Rake-Off system for Nested Based CNC Router operation.Designed for loading of a 5' x 10' (61" x 128") panel cap. CNC Router and can handle material up to that size; Load/Rake cycle time is approx. (25) Seconds. -- Operating Process:A fully Automatic sheet Feeder and Unloader. Designed for a single bunk application and the ability to load from 3 sides.As it moves the sheet over the router table the previously nested parts are pushed onto a conveyor or sorting table, the dust is cleaned from the router table by the dust collection on the front of the gantry and the new sheet is Squared up on the router table.Full Bunk of material is loaded into staging area constructed of tubular steel with cross-support and safety guides to properly position bunk, preventing damage by Forklift operator to loader base.Loading is performed via a vacuum cup system with (4) rows of adjustable vacuum cups, (2) cups per row; front-to-back spacing is fixed and cups are adjustable left-to-right.Material is picked up from the top of the stack and loaded onto the router table, pusher arms at front & right side square the material onto the table.After machining, the vacuum lift picks up another sheet for processing; as it brings it over the side, squaring arm rakes the processed panel and skeleton onto a side table. PLEASE NOTE: This unit will need to be integrated with the controller of your current CNC Router. Actual Model is KOMO MHS.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i63 The Flex Series of CNC routers from Komo Machine has been developed specifically for the customer who expects the utmost in technical quality and reliability at an economical price. These machines feature a moving gantry configuration and a side-mounted tool changer. Features: Four-pole, 16HP (12kw), 24,000 RPM, HSK 63F, fan-cooled spindle, 12 position automatic tool changer with aggregate capability, Air blast for optimal dust/chip evacuation and cooling of the cutting tool, Advanced Fanuc HVI servo system tuned for optimum acceleration and deceleration, Fanuc Panel i control with integrated PC 19" color display Construction, FEA "Finite Element Analysis" engineered structure, Heavy-duty steel fabrication Specifications Spindle: 1 Spindle RPM 16HP (12kw), four-pole, fan cooled Up to 24,000, fully programmable with HSK 63F taper. Table: 60" x 144" (1524mm x 3658mm), Four (4) 1" (25mm) part location pins Aggregate-Capable Tool Changer: Max 12 tools, Max Dia. 3.25" (82mm) positions full; 6.5" (165mm) adjacent positions empty, Max weight 12 lbs each / 80 lbs total (5.4kg / 36.4kg) Max Length 5" (127mm) Feed Rate/Traverse: X-Axis 2500ipm (63.5mpm), Y-Axis 2500ipm (63.5mpm) Z-Axis 1200ipm (30.5mpm), Acc/Dec83.3 in/sec² Axis Travel: 149" (3784mm) x 82" (2082mm) x 8.5" (215mm) Positioning: ±0.0008" (0.02mm) linear axis repeatability accuracy Control System: Fanuc Panel i With integrated PC and 19" color display Dust Collection Interface: 6" (152mm) diameter (recommended volume 900 cfm) Includes: Dekker Vacuum Pump NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

KRAMER K2024-1U -- K20 Series system is a heavy-duty barrel tumbler with standard capacity of 4.80 cubic feet. -- K20 system is a deburring machine solution that features a timer, variable speed, a heavy chain drive, and removable, interchangeable barrels. -- This deburring turn-key machine can configured to handle (1) to multiple barrels at a time. The barrels are mounted in a cradle and can be interchanged to divide up the load. -- Includes (1) Unlined barrel -- Variable speed control 25 - 50 RPM; 24-Hour timer; Start-stop switch. -- Complete unit dimensions are 58" W x 32" D x 50" H.

The K14 Series system is a small, heavy-duty, bench-top, barrel tumbler with standard capacities ranging from 0.75 - 1.5 cubic feet. -- The K14 system is a deburring machine solution that features a timer, variable speed, a heavy chain drive, and removable, interchangeable barrels. -- The barrels are mounted high enought to allow a screen and pan underneath so the barrel can be emptied without lifting and dumping. -- This deburring turn-key machine can handle loads of up to 200 Lbs. The barrels are mounted in a cradle and can be interchanged to divide up the load. -- (1) Steel barrel lined with a durable Polyurethane lining; 14" diameter across corners by 22-1/2" wide; Quick action lock on covers, solid, watertight doors. -- Variable speed control 25 - 50 RPM; 24-Hour timer; Start-stop switch. -- Complete bench-top unit dimensions are 44-1/2" W x 25" D x 24" H.