Woodworking Equipment For Sale

SILVER 6023AH Moulder Feed Through 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6". Head sequence: -- Bottom 10 HP, top 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- All spindles with mechanical digital readouts. -- Feed: Variable speed of 18 - 82 FPM, with 5 HP feed drive motor. Powered feed rollers top and bottom. -- Infeed: Straightening table 2 M (6'6"), with side pressure roller and table lubrication pump. Includes:: -- Centralized control panel, -- Sound and safety enclosure.

Silver Straight Line Rip Saw 15 HP Motor

Model SF-45A 600 V / 3 Ph / 60 Hz 10ft table 8.5 HP main motor provides(2) cutting speeds 3,800 & 5,200 RPM

SILVER SJK-21 Horizontal & Vertical Boring on 32 mm centers.(21) Spindles in line on one boring head (aluminum alloy single block), drills vertically from top & horizontally from rear. -- Features pneumatic adjustment for horizontal boring.Specifications: -- Max drill dia. is 1.38" (35 mm); Max panel thickness is 2.36" (60 mm); Table size 36" x 19.75" (914 x 502 mm). -- Length of cross fence is 102" (2,600 mm); length of aluminum table fences are 39" (1,000 mm) to the left and 28" (710 mm) to the right with flip stops.Equipped with: -- Depth stop adjustment, (2) holddown air cylinders, and foot pedal operation for clamping/drilling cycle. -- 2 HP - 3,600 RPM TEFC motor with thermal overload protection and low voltage controls.. -- Includes (12) Quick change chucks..

SILVER SJK-19T Line Boring MachineSingle line vertical boring machine with (19) spindles at 32 mm centers driven through a powerful 1.5 HP motor.Equipped with: -- Foot pedal controlled pneumatic boring cycle -- Adjustable boring feed speed -- Adjustable boring depth for fast changeover -- 2 Pneumatic cylinder clamp for solid hold-down to the material. -- 3 Meter long back fence for long line boring with flip stops -- (2) Positioning pins at both end of boring head to set up for longer line boring quickly -- Quick change chuck for fast changeover (19 pcs included)Specifications: -- No. of Spindles....................................................................................... 19 -- Distance between each spindle.............................................................. 32 mm -- Max Boring Depth .................................................................................. 60 mm (2.36") -- Working Table Size................................................................................ 800 x 500 mm (31.5" X 19.68") -- Table Height from Floor......................................................................... 780 mm (30.35") -- Max Boring Depth from Edge................................................................. 155 mm (6") -- Electric .................................................................................................. 220 V / 60 Cy / 3-Ph -- Machine Size (LxWxH) ........................................................................... 920 X 670 X 1490 mm (36.25" x 26.37" X 58.66") -- Net Weight ............................................................................................ 220 kgs. (484 Lbs)

SIMI 5' x 10' HOT PRESS Platen dimension 123" x 63" (3,125 mm x 1,600 mm). -- Max. daylight opening 17" (430 mm). -- (8) Hydraulic upstroke cylinders with diam. 6" (150 mm). -- Electrically heated platens with a maximum heating temperature of 240 F (120° C) -- Loading on all (4) sides of press.Overall dimensions: Length 165" x 81" x 117-1/4"

Simonds Band saw leveler. Comes with pallet of spare parts.

SNX - Coil Hub, ...Edgebanding Heater & Storage System: For straight-line and contour Edgebanders - Keeps banding at the perfect temperature. - Softens banding, making it more pliable. - Keeps banding at the perfect temperature. - Softens banding, making it more pliable. - Increases adhesion. - Decreases delamination issues. - Allows a cleaner guillotine cut. - Lessens the chance of chipping when trimming. This "CoilHub" also keeps the coils contamination-free, keeps the edgebanding easily accessible right at the machine, and can store up to (20) coils.

SNX nVISION SYSTEM G1 CONTOUR EDGEBANDER: -- SpecificationsCurved (Contour) Edgebander allows 360° edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation as Operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity"nVision 1" Bands minimum material size: 150 mm (6") diameter.Max. material size: 2,400 x 2,400 mm (94" x 94"); Max. material weight: Up to 104.5 kG (230 Lbs).Material thickness from: 10 - 60 mm (0.4" - 2.36"); Banding thickness from: 0.5 mm thin tape w/low temp adhesive to 3 mm tape. -- Radii CapacityMin. internal (inside) radius: 80 mm (3.14"); min. external (outside) radius: 30 mm (1.18"), based on 1 mm thick edge tape. Edgebanding thickness: 1 mm; min. = R 30 mm. Edge thickness: 2 mm; min. = R 50 mm. Edge thickness: 3 mm; min. = R 80 mm. Panel thickness: 10 - 60 mm w/Edge thickness 1 mm. Panel thickness: 10 - 60 mm w/Edge thickness 2 mm. Panel thickness: 10 - 45 mm w/Edge thickness 3 mm. IMPORTANT: ALL minimum & maximum radii are affected by: Tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape: Semi or rigid.Equipped with:Thermal-regulated glue pot. Heated via (2) 800-Watt heating elements with: Electronic temperature controls; holds up to 1 kG (2.2 Lbs) granules. (2) Pressure rollers: Copies the shape of the piece; automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2-1/4"). Features -- Laser for easy length identification with: Closed parts without the need for additional length measurement.Laser detects: Tight radius; automatically slows the speed + resume the set speed when the detected radius has passed.Machine equipped with: Foot pedal for manual control/intervention. Motorized turntable for: Automated edgebanding application to large panels.Holding or support arm with: Large interchangeable vacuum pod to secure panels for edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area.Complete with: Top & Bottom Trimming Unit. Centralized Control Panel with: Individual controls for all stations to enable manual feeding of panels if desired. Banding station. Edge band coil stand. Standard size vacuum pod for articulated arm. 80 mm Dia. (3") Dust extraction outlet. Foot pedal activation/deactivation control. Larger feed roller. QC Glue tank with sensor. -- Actual Model: SNX nVISION SYSTEM G1

SNX nVISION SYSTEM2 G2 CONTOUR EDGEBANDER + Optional Dual Telescoping Arms for simultaneous Contour Banding & Trimming: -- Specifications: Curved (Contour) Edgebander to allow 360° edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation as operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity: The nVision Contour Bander can band a minimum material size of 150 mm (6") diameter.Maximum material size 2,400 x 2,400 mm (94" x 94"); Maximum material weight up to 104.5 KG (230 LBS).Material thickness from 10 - 60 mm (0.4" - 2.36"); Banding thickness from 0.5 mm thin tape w/low temp adhesive - 3mm tape. -- Radii Capacity:Minimum Internal (inside) radius 80 mm (3.14"); minimum external (outside) radius 30 mm (1'18") based on 1 mm thick edge tape. Edgebanding thickness 1 mm, min = R 30 mm Edge thickness 2 mm, min = R 50 mm Edge thickness 3 mm, min = R 80 mm Panel thickness 10-60 mm with edge thickness 1 mm Panel thickness 10-60 mm with edge thickness 2 mm Panel thickness 10-45 mm with edge thickness 3 mmIMPORTANT: ALL minimum & maximum radii are affected by tape thickness, quality of adhesive and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape, semi or rigid. -- Equipped with:(1) Thermal-regulated glue pot heated via (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 KG (2.2 LBS) of granules. (2) Pressure rollers to copy the shape of the piece, automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2.25"). -- Features: TRIAX 3-AXIS Laser System (patented) for tighter butt joints & easy length identification with closed parts without the need for additional length measurement.The Laser also detects a tight radius and will automatically slow the speed + resume the set speed when the detected radius has passed.The machine is also equipped with a foot pedal for manual control/intervention. Motorized turntable for automated edgebanding application on large panels.(2) "Heavy Duty" Articulating arms to support the parts during edgebanding and trimming. Arm has a large interchangeable vacuum pod to secure panels during edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. Tolerances of inner & outer radii and fit within the work area. -- Complete with: Top & Bottom Trimming unit Centralized control panel with Simple PLC Touchscreen Interface with individual controls for all stations to enable manual feeding of panels if desired Banding station Edgeband coil stand Standard-size vacuum pod for articulated arm 80 mm dia. (3") dust extraction outlet Foot pedal activation/de-activation control Larger feed roller &#9

SNX - nVision System2 G2. Contour Edgebander + Optional Dual Telescoping Arms for simultaneous Contour Banding & Trimming -- Specifications Curved (contour) Edgebander to allow: 360° Edgebanding to contoured (shaped) panels.Edgebanding applied automatically as part is advanced past the edgebanding Workstations via turntable.Reduced learning curve/expertise for operation as Operator easily loads part to vacuum turntable, then activates the edgebanding cycle. -- Working CapacityThe "nVision" Contour Bander bands a min. material size of: 150 mm (6") dia.Max. material size: 2,400 x 2,400 mm (94" x 94"); max. material weight up to: 104.5 kG (230 Lbs).Material thickness from: 10 - 60 mm (0.4" - 2.36"); banding thickness from: 0.5 mm thin tape w/low temp adhesive - 3 mm tape. -- Radii CapacityMin. internal (inside) radius: 80 mm (3.14"); min. external (outside) radius: 30 mm (1'-18") Based on 1 mm thick edge tape. Edgebanding thickness: 1 mm; min. = R 30 mm. Edge thickness: 2 mm; min. = R 50 mm. Edge thickness: 3 mm; min. = R 80 mm. Panel thickness: 10 - 60 mm with edge thickness 1 mm. Panel thickness: 10 - 60 mm with edge thickness 2 mm. Panel thickness: 10 - 45 mm with edge thickness 3 mm.IMPORTANT: ALL min. & max. radii are affected by: Tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape: Semi or rigid. -- Equipped with:(1) Thermalregulated glue pot heated via: (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) granules. (2) Pressure rollers to copy the shape of the piece; automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (1/8" - 2-1/4"). -- Features TRIAX 3-AXIS Laser System (patented) for tighter butt joints & easy length identification with closed parts without the need for additional length measurement.Laser detects a tight radius; automatically slows the speed + resume the set speed when the detected radius has passed.Machine equipped with: Foot pedal for manual control/intervention. Motorized turntable for: Automated edgebanding application to large panels.(2) "Heavy-Duty" Articulating arms to support the parts during edgebanding & trimming; arms with large interchangeable vacuum pod to secure panels during edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area. -- Complete with: Top & Bottom Trimming unit. Centralized control panel with: Simple PLC Touchscreen Interface with individual controls for all stations to enable manual feeding of panels if desired. Banding Station. Edgeband coil stand. Standard-size vacuum pod for articulated arm. 80 mm dia. (3") dust extraction outlet. Foot pedal activation/deactivation contr

SNX nVision System G1: Contour Edgebander -- SpecificationsCurved (Contour) Edgebander allows: 360° Edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation: Operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working CapacityThe" nVision 1" can band min. material size: 150 mm (6") diameter.Max. material size: 2,400 x 2,400 mm (94" x 94"); max. material weight: Up to 104.5 kG (230 Lbs).Material thickness from: 10 - 60 mm (0.4" - 2.36"); banding thickness from: 0.5 mm thin tape w/low temp adhesive to 3 mm tape. -- Radii CapacityMin. internal (inside) radius: 80 mm (3.14"); min. external (outside) radius: 30 mm (1.18"), based on 1 mm thick edge tape. Edgebanding thickness: 1 mm; min. = R 30 mm. Edge thickness: 2 mm; min. = R 50 mm. Edge thickness: 3 mm; min. = R 80 mm. Panel thickness: 10 - 60 mm w/Edge thickness 1 mm. Panel thickness: 10 - 60 mm w/Edge thickness 2 mm. Panel thickness: 10 - 45 mm w/Edge thickness 3 mm.IMPORTANT: ALL minimum & maximum radii are affected by: Tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape: Semi or rigid.Equipped with:Thermal regulated glue pot heated via: (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) granules. (2) Pressure rollers: Copies the shape of the piece; automatic guillotine for coiled material up to: 3 mm (0.11") Thickness & 57 mm height (0.125" - 2-1/4"). Features:Laser for easy length identification with: Closed parts without the need for additional length measurement.Laser detects: Tight radius & will automatically slow the speed + resume the set speed when the detected radius has passed.Machine equipped with: Foot pedal for manual control/intervention. Motorized turntable for: Automated edgebanding application to large panels.Holding or support arm with: Large interchangeable vacuum pod to secure panels for edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area.Complete with: Top & Bottom Trimming Unit. Centralized Control Panel with: Individual controls for all stations to enable manual feeding of panels if desired. Banding station. Edge band coil stand. Standard size vacuum pod for articulated arm. 80 mm Dia. (3") Dust extraction outlet. Foot pedal activation/deactivation control. Larger feed roller. QC Glue tank with sensor. -- Actual Model: SNX - nVision System G1

SNX - nVISION C 1.5: Contour Edgebander -- Specifications The "nVision C1.5" Curved (Contour) Edgebander allows: 360° Dedgebanding to contoured (shaped) panels. Standard banding machine includes banding &trimming stations with: (1) Set of cutting tools; (1) articulated vacuum arm; edgeband coil stand; (1) 8″ aluminum vacuum pod. - Includes: On-site installation & training; free phone support; operation manual; 1-year limited warranty.The machine uses: Standard EVA hot melt glue; can apply 0.5 mm - 3 mm thick edgebanding.Edgebanding is applied automatically: Part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation: Operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity"nVision C 1.5": Bands minimum material size: 150 mm (6") Diameter.Max. material size: 2,400 x 2,400 mm (94" x 94"); max. material weight: up to 104.5 kG (230 Lbs).Material thickness from: 10 - 60 mm (0.4" - 2.36"); Banding thickness from: 0.5 mm thin tape w/low temp. adhesive: 3 mm Tape. -- Radii CapacityMin. internal (inside) radius: 11.1 mm (0.4375 - 7/16"); Mini. external (outside) radius: 30 mm (1.18") Based on 1 mm thick edge tape. IMPORTANT: ALL min. & max. radii are affected by tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape: Semi or rigid.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area.Equipped with:Thermal regulated glue pot heated via (1) 800-Watt heating elements with: Electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules. (2) Pressure rollers to copy the shape of the piece; automatic guillotine for coiled material 0.5 mm - 3 mm (0.02" - 0.11") thickness & 57 mm height (2-1/4"). Operator Interface -- Faster processor and a more accurate encoder for more consistent tight butt joints; 15"; touchscreen monitor; training & maintenance videos on PC; connect to the Internet for service & updates; more user-friendly interface. - Bar code capable (optional).15"; Touchscreen monitor provides: Intuitive control panel, while features like training & maintenance videos make it easier than ever to maintain and operate the machine.Optional bar code capability allows: Seamless integration into modern production workflows, reducing the potential for operator errors.Features -- Tape height guide; aluminum infeed guides; solid shoe holder; adjustable pod height spindle; digital readouts; pneumatic enclosure; laser upgrade.New PLC interface enhances: Usability, while the machine is capable of edgebanding & trimming an inside radius as small as 7/16″. It features: 18,000 RPM - ER20 collet-type spindles (top/bottom), and the same proven articulating vacuum support arm."nVision C1.5" can: Band & trim open-ended parts up to 8’ in length; apply edgebanding from 0.5

SORBINI TM/95-2F Flow Coater Specifications: -- 24" Coating width, 4" max. thickness, hand crank controls curtain thickness, (1) head gravity feed. -- 2 HP feed motor for variable feed speed from 90 - 350 FPM, (1) 1.5 HP circulating pumps, (1) stainless steel tank & return reservoir. -- Conveyor: 24" Wide, 60" Long at infeed, 72" long at outfeed. 34" long center belt.

2022 CNC controller! Under power & ready to demo! 3-Axis CNC Vertical Milling Machine - Seller has outgrown and upgraded to larger capacity CNC Machining Center. - Table size 10" x 50" x 38” H - Travels: X-Axis: 31", Y-Axis: 17", Z-Axis: 23-1/2" - Quill travel 5" - Quill diameter 100 mm (3.94") - No. 40 Spindle taper - Variable spindle speeds 80 - 4,000 RPM - Rapid traverse 150 IPM - Distance from spindle nose to table (Maximum part height) 23-1/2" - Distance from spindle center to column face 19" - Maximum weight of workpiece 1,320 Lbs. - Maximum work capacities: 1" Drilling & Tapping mild steel & Milling (Metal removal rate/mild steel) 5 cu. in./min. - 5 HP Spindle motor - 560 in-oz Continuous torque D.C. servo motors & Precision ground ball screws for X, Y, & Z-Axes - YEONG DIEN Automatic lubrication unit Includes: - 2022 "PROTOTRAK SMX3" 3-Axis CNC Control/3-Axis Digital Readout (Control defines tool path based upon user defined part geometry), with Pentium PC-processor with 512 MB RAM, 10.4? Color active-matrix screen, Touchpad, (4) USB connectors, MICROSOFT "WINDOWS" Operating system, Program feedrate override & Tool path graphics - ALL MACHINE PARTS "MAXI TORQUE-RITE" Pneumatic drawbar, with 40 - 50 ft. Lbs. of torque - EKSTROM CARLSON "MISTIC MIST 1ST-2LC" 1 Gallon Capacity Coolant Mist Generator, with Adjustable air & Liquid control valve - WALDMANN "ROCIA.FOCUS" 600 Lumen 5,000 K Sealed Housing LED Work Light

The seller has confirmed that this is in fair working/running condition and it is ready to load! - Cross cut panel saw

STANMAC SPRAY 300 Moulding Sprayer The Stanmac "Spray 300" is ideal for linear profiles in a wide range of materials and capable of utilizing both waterborne and solvent-based coatings including stains, paints, and lacquers.Spray guns are automatically timed for the start and stop of the spray cycle to ensure the best spray efficiency. The overspray is captured by the spray trough and can be recovered while atomized spray is captured by fiberglass media and clean air is exhausted from the spray cabin.Can be fitted with spray gun packages to include conventional, air-assisted airless, and airless to suit your requirements.Specifications: -- Workpiece max. width: 12"; -- Workpiece min. length: 30" -- Feed Speeds: 30 - 150 FPM -- Feed Motor: 0.5 HP -- Extraction Fan: 3.0 HP -- Number of Spray Guns: 3 -- Recovery Troughs 1 -- Spray Gun Trigger: Electronic Switch -- Piece Counter: Digital -- Filter Media: Replaceable fiberglass media

STANMAC "MC/WB 300" Vacuum Coater; 3- or 4-sided coating. -- 8" Max. width x 2-1/4" max. height cap.; 24" min. length. -- Substrate enters vacuum chamber via 6" conveyor belt and passes through the coating; variable speed from 30 - 200 FPM as the substrate leaves the chamber. -- Negative pressure in the chamber keeps excess fluid inside resulting in 100% transfer efficiency; coating runs through several filters and is sent back to the reservoir for use again. -- Equipped with: (1) 15 HP Regenerative vacuum producer that holds fluid inside vacuum chamber; 15-gallon capacity reservoir; stainless steel vacuum chamber with adjustable substrate holddowns & guides. -- Equipped with: Air operated diaphragm Recycling Pump, high capacity fluid filter, separation tower with stainless baffle, and filtering system. -- Heavy gauge steel construction and free-standing control/operator panel. -- 100% Transfer efficiency; coating thickness controlled with a modulating valve & vacuum pressure gauge. -- Uses waterborne coatings for stains, primers, sealers, basecoats, topcoats, and even fungicides; can be used to coat most solid materials regardless of shape or length.

STATE - B-4, ...Oscillating Spindle SanderSpecificationsTilting table design with pedestal floor mount.Table size: 20" x 24".Table height: 40".Table tilt: 15° Up; 45° down.Spindle speed: 1,725 RPM.Vertical oscillation: 1-5/8".Oscillations/Min: 90.Lubrication: Oil bath splash. -- Heavy-Duty 1/2 HP motor; maintenance free; 1,725 RPM; TENV totally enclosed non-vented motor; rated for continuous operation; assuring long term dependable service. -- Safe operator controls; magnetic motor starter with overload protection for save installation.All controls mounted for operator convenience. -- Operator friendly handwheel tilting Engineered worm gear design allows table to be tilted 15° up & 45° down relative to spindle.Easy-to-read scale allows for accurate tilt determination before engaging locking device. A tapered pin locks the table during horizontal sanding operations. -- Safety features: Magnetic motor starter with overload protection; safety labels; well-placed ergonomic controls; 3-throat rings to minimize table-to-spindle clearance; POSITIV-LOK spindles provide safe & quick means of changing spindles. -- Recently cleaned, checked; electrical contacts cleaned; machine partially disassembled cleaned; reassembled & tightened; oil sight glass replaced.Weight: 280 Lbs.

STATE D-30 DISC SANDERDynamically balanced 30" steel disc.Commercial duty direct drive 5 HP motor.Heavy cast iron 14" x 38" table w/miter gauge slot.Easy precise rack and pinion tilting of the work table with 45° down and 30° up.Motorized Rack and pinion adjustment of the table rise & fall. Sanding station is mounted to (2) 3-1/2" heavy columns.Heavy bolt-down cast iron base.