Woodworking Equipment For Sale

Delta Radial Arm Saw

DELTA/INVICTA RT 40 TABLE SAW14" Blade dia., 7.5 HP motor belt drives arbor at 3,500 RPM, 1" dia. right hand tilting arbor 0° - 45³; 4-1/2" max. depth @ 90°, 54" rip capacity to the right of blade.Front edge of saw to front of blade 16-1/2"; 59" x 43-5/16" precision ground cast iron table w/miter slots on either side of the blade, 33-1/2" table height.Equipped with: 54" BIESMEYER Fence system ($500 value); "Cam-lock" Fence system, and magnetic push button starter

Delta Table Saw 5 HP 230 volt 3-phase

Manufacturer’s Specfication - Motor: - Horsepower: 3 HP - Voltage: 230V - Hertz: 60 Hz TEFC - Phase: 1-Phase - Feed Motor: - Horsepower: 1/6 HP - Phase: 1-Phase - Speeds: 1,550 RPM Drums; 3 to 20 FPM Feed Belt - Sanding Capacity: 12-1/4 in. x 25-1/2 in. - Minimum Sanding Thickness: 1/4 in. - Minimum Length of Unbutted Stock: 6 in. - Drums: 5 in. x 26 in. Aluminum - Sanding Strip Size: 5-1/8 in. x 92-1/2 in. - Dimensions (Assembled): 31 in. x 46 in. x 53 in. - Base Dimension for Mobile Base: 17-3/4 in. x 43 in. - Weight: 418 lbs.

DEPENDABLE - 203, ...Cold Press40" x 102" Cap., side loading on 102" sideSpecifications: &#9679 (3) Split upper platens: 34" wide x 40" deep; split platens can be interlocked for single platen operation. &#9679 45" Max. daylight opening with 12" down stroke hydraulic cylinders. &#9679 (6) Rows of pop-up rollers in machine bed for loading & unloading. &#9679 (3) 7-3/4" Dia. hydraulic press cylinders from the top; (1) per platen. &#9679 Hydraulic power pack with 10 HP motor mounted on floor at end of Press.

DETEL M-2H DOUBLE ROW LINE BORER.(2) Line boring heads of (25) spindles each on 32 mm centers, drills from the bottom up.Equipped with: -- (2) 2 HP motors drive spindles at 3,400 RPM. Hand crank adjusts the opening between heads from 5" - 25" w/mechanical digital readouts, drilling depth up to 2-1/2" -- Dust Collection on each head. -- Hardened steel gears that are pressed onto the spindle shafts, 120" back fence with (4) large flip-stops. -- (2) Pneumatic index pins with independent switches for sequence boring on long side panels. -- (2) Overhead pneumatic hold-downs. -- Complete with standard screw-in 10 mm collets; air/electrical controls, pneumatic oiler, and foot pedal actuator for clamping & boring cycle.

Detel M-2H Boring Machine (2) 25-Spindle Boring Heads

DEWALT GE 20" Radial Arm Saw Specifications: -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; -- 6" Thickness cap. @ 90°, 27" max. crosscut cap. cutting 2" board; 42" rip cap. with 52" long arm; 2" dado capacity. Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. Includes: -- (1) New 20" blade.Optional: -- VFD Electric brake.Note: Photos are not of actual machines, but they represent the state of "Reconditioning"

DEWALT - GA (563A), ...Radial Arm Saw -- 14" Blade cap.; 1" arbor; 3 HP - 3,425 RPM motor; 16" cutoff cap.; 4" depth of cut. -- 20" x 50" Table; hand crank raise & lower. - Complete with: Blade guard; 4" dia. dust outlet, and starter.

Dewalt Radial Arm Saw

DEWALT GA 16" Radial Arm Saw Specifications: -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90°, 19" crosscut cap., cutting 1" board with long arm. -- Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. -- Optional: -- Electric brake. -- Photo not of actual machine.

DEWALT - 35 Series Super Duty, ...22" Radial Arm SawSpecifications: -- 7.5 HP TEFC Saw motor; 22" dia. blade; 52" long arm; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90°; 26" crosscut cap.; 40" rip cap. -- Complete with: -- Blade guard, magnetic starter, stand, and carriage return mechanism. -- Optional: Electric brake.

DEWALT 10" Radial Arm Saw. -- Specifications: -- Blade diameter: 10"; Table size: 27" x 30" x 36" H.

Several Dewalt Radial Arm Saws

DIEHL STRAIGHT LINE RIP

MLS Number 10682943 DIEHL SL52 STRAIGHT LINE RIP SAW Bottom arbor 4-1/4"X8-1/2" capacity 15 HP 3,545 RPM arbor drive motor Infeed speed up to 200 FPM Serial# 10/88M-5312-4728 Voltage: 460/60/3 phase Amps: 21.7 Wiring diagram # 2-9000-0026 Was removed from service in November 2020

Diehl Straight Line Rip Saw

DIEHL 990 GANGRIP SAW Product No. 1001 30 HP - 3600 RPM arbor motor-AB size 4 starter-110 volt controls 12 " arbor width with 3-1/2" maximum thickness 8 roll feed - 4 top (powered) - 4 bottom Anti-kick back fingers : top and bottom One (1) saw cartridge-2 3/4 " saw blade bore New arbor bearings 5 HP feed: single speed Rip fence Outboard bearing on arbor 3" throat capacity to 1st saw blade Cleaned, painted and checked Serial # : 54174 Year: 1958

Diehl SL 50 Straight Line rip saw with adjustable infeed speed controller 15HP 480 volt 14” saw blade feed chain 8 ¼” wide, Table dimensions: 80” x 57” Serial # 65M1297570 We also have available a Diehl SL 52 in our inventory A wooden pallet/crate will be built for shipping at no charge Contact us for price including freight. Can test run saw with video upon request. Stored in our warehouse for prompt delivery.

Diehl SL50 Straight Line Rip Saw 240 volt 3 phase Variable speed control SN: 51108