Woodworking Equipment For Sale

1978 Weinig 7 Head Moulder S/N 2816/2248

Wemhoner Variopress

WEMHONER Hot Oil Feed Thru Press, 7’ x 12’ Platen, 7.5’ x 13’ motorized feed belt, 340 Ton pressure, 8 cylinders, 6” opening, 12’ gravity outfeed conveyor, Includes natural gas boiler for hot oil., Machine is no longer in service and disassembled. Call 800-459-2148 for more info.

West Salem model 2420GR1-H wood grinder/hog 480 v Bottom discharge No screen - machine has breaking bars Disconnected and ready to ship

WESTERN PNEUMATICS FJE 430R Medium Production Finger Jointer SystemRight and left Shaper Section with Automatic crossover model FJE 430 RCSpecifications: -- Material Thickness Capacity: 5/8"; – 2"; -- Material Width Capacity: 1-5/16"; to 8"; -- Material Length: 4"; – 28"; -- Feed Capacity 30 - 60 Lugs Per Minute -- Lugs are Space on 12"; Centers -- Feed Motor: 10 HP -- Variable Speed Feed from 30 - 60 FPM -- Scoring Saw Motors: 3 HP -- Trim Saw Motors: 5 HP -- Cutterhead Motors: 15 HP -- Manual Transfer Corner -- APQUIP Glue Applicator -- Assembly Press w/ 16’ Max. Cut-off Capacity, Model AMS 248 LB -- Assembly Section Feed Variable Up to 150 FPM -- Self-Contained Hydraulic Unit -- 7.5 HP Cut-off Saw -- Board Press, Model BPS 216 RC -- Standalone Control Cabinet -- Touchscreen PLC Control

Whirlwind Undercut Saw with Tiger Stop Fence

WHIRLWIND - 855, ...Dual Table Oscillating Edge SanderDouble-sided with: 8" x 56" Platens size.Specifications -- 7-1/2 HP - 1,725 RPM TEFC Motor; abrasive belt size: 8" x 151"; approx. (150) oscillations/Min with 3/8" stroke. -- 11" x 55" Side table; tilts 0° - 45° with 8" vertical adjustment; tiltable end table; iron frame machine base. Complete with: -- Magnetic electrical controls w/overload protection; dust hood on drive end; all standard equipment.

WHITNEY NO. 105 24" x 8" Single-Sided Planer, with Knife SharpenerSpecifications: -- Planing thickness 1/16"; - 8";. -- Min. stock length 13";, 3"; Butted. -- Infeed & Outfeed table sizes 23-3/4" W x 16-1/4"; L. -- Feed speeds 20 - 60 FPM. Equipped with: -- 4-1/2"; Dia. 4-straight knife cutterhead, with 7-1/2 HP - 3.500 RPM Motor. -- 5"; Dia. Segmented serrated infeed with 2"; W Spring-loaded segments & 3-9/16"; Dia. Smooth solid steel outfeed upper feed rollers, with 1-1/2 HP Motor & Micro-feed selector. -- Chip breaker, with 2-1/4"; W Sections. -- (2) 3-9/16"; Dia. Smooth steel in-table feed rollers.Complete with: -- Motorized Knife Sharpener, with 1/4 HP - 1,750 RPM Motor.

Williams 125 CJS1 Hammermill

Williams 125 HP Hammermill 230/460 3-phase

William & Hussey "W-7S" Moulding Shaper -- Specifications: 17-1/4"x 14" Table size, 2 HP main motor, 2-knife cutter head, 3,450 RPM spindle speed, 7" max. cutting height, 1/4" min. thickness 3/4" deep max cut.. Max moulding cap. 7" wide, max. planning cap. 7" wide. -- Complete with: Dust hood outlet, electrical disconnect, and mounted on fabricated steel stand w/casters, Multi-pass

100 HP 230/460 volt 20” x 19” inlet 9” x 28” outlet no hopper

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

Wintersteiger DSG Sonic Frame Saw

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

Specifications: 25" x 7" Cap., 7.5 HP, belt-driven cutter head set up with grooving knives for making "bead board" panels; 3/16" max. depth of cut, 8-1/2" min. stock length. -- Variable feed speed up to 23 FPM; 25" x 49" planing table w/extensions, 4-post bed supports for accurate opening via hand wheel adjustments. Complete with: Magnetic controls, dust hood with extraction outlet, and fabricated steel base.NOTE: Tooling will not be separated from the machine. This machine can be equipped with accessories available through WOODMASTER to double-up duty as a Gang Rip Saw, Drum Sander and enable the production of short moulding runs.

Woods 502M hardwood flooring machine