Edgebanders For Sale

SCMI MINI-MAX ME 25 EDGEBANDER, SINGLE SIDED SINGLE PHASE0.4 mm to 3 mm (1/8") Max. edge thickness cap. and 1.96" max. panel thickness; semi-automatic strip & coil feed magazine (feeds coil material automatically and strips one at the time); Teflon coated glue pot w/fast (8-10) Minute heat-up time, 1.2 mm cap. guillotine.Workstations: -- "ME 25" 2-Head -- Single motor end trim (0.8 HP - 12,000 RPM motor) -- Top & bottom flush trims (0.8 HP - 12,000 RPM ea. motor), straight or bevel cutters. -- Top & bottom scraping station. -- Top & bottom buffing, 3,000 RPM motors.22 FPM Fixed feed speed with 0.8 HP drive.Complete with: Sound enclosure, out rigger panel support, frequency converter, and used tooling on the stations.Features: Control Panel on machine infeed side Machine frame made of high rigidity ribbed steel to guarantee excellent support Top thick steel pressure beam with rubber coated wheels Manual adjustment of top beam with Auto positioning of operating units Numeric indicator of selected panel thickness Glue smoke-specific exhaust outlet; centralized extraction of the dust Panel support roller which can be extended the entire length of the machine

SCMI OLIMPIC K 600 T-ERL EDGEBANDER (W/PRE-MILL/CORNER ROUNDING): -- Specifications:0.4 to 3 mm For roll feeding and up to 8 mm for strip feeding. -- Panel Capacity: Min. Panel width 60 mm (2.375"); Min Panel length 140 mm (5.5").Min./max. Panel thickness 8 - 54 mm (0.375" - 2.125"); Minimum distance between panels 508 mm (20").Feed speed 36 and 52 FPM (2.5 HP feed motor) Equipped With: -- Adjustable In-feed Fence:Manually pre-set with digital indicator, pneumatic in/out positioning. 1-Coil feeder: For banding up to 3mm thick with a 3 mm guillotine. -- Gluing Station:For EVA (Hot Melt) with Quick change/disconnect Teflon glue pot for fast glue tanks change if needed. Heat-up time approx. 8-10 Min. -- Pressure Section:Manual digital positioning: Teflon-coated pneumatic driven roller & (2) spring-loaded idle rollers. Includes "Strip Feed Magazine"Workstations: -- End Trimming Station: "K-SEL 2" Front & rear 0.5 HP, 12,000 RPM motor mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Top & Bottom Trimming Unit: 2 x 1.0 HP - 12.000 RPM Motors capable of tilting 0 to 25 degrees with copy wheels. Pneumatic positioning for (3) settings, flush/bevel/radius trimming via precision digital indicators to go from 3 mm PVC to thin tape through the controller for quick setup. -- Two Motor Corner Rounding:(2) 0.80 HP independent motors that slide on THK guides. The features of the "Round-K" (SCM patent) allow for the double function of both the simultaneous trimming and rounding operations -- Top & Bottom Profile Scraping Unit: "RAS/K" profile scrape station for 3 mm PVC with pneumatic positioning, with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°.Operator & Machine Control: -- "STARTOUCH" Controller with 12" touchscreen display, capable of storing 100 programs.Machine automation by PLC function and encoder positioned in the panel feed track pinion.Diagnostics for a quick solution to errors. Process statistics data, ie. No. of pieces/edges, and track feeding.Features & Complete With: -- 1 x 2.0 HP feed drive motor; -- 200 Hz frequency inverter for all trimming units; -- Manual adjustable hold-down pressure beam; -- Full sound enclosure cover and outboard panel support. -- Adjustable side support. -- Replaceable track pads. -- Digital inverter for electronic motor braking -- Acoustical safety enclosure. -- Dust Collection: Working units are individually ported on the top of the safety enclosure for maximum efficiency. -- Actual model is SCM OLIMPIC K 600 T-ERL.

SCMI OLIMPIC K 560 T-ER2 EDGEBANDER (W/PRE-MILLING & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 6 mm (0.016 to 0.25") for strip feeding. -- Panel Capacity: Min. Panel width 60 mm (2.375"); Min Panel length 140 mm (5.5");Min./max. Panel thickness 8 - 54 mm (0.375" - 2.125"); Minimum distance between panels 600 mm (24").Equipped With: -- Pre-milling station: (2) 2.0 HP (1.5 kW) motors, to rectify/clean panels already sized. -- Adjustable In-feed Fence: Manually pre-set with digital indicator, pneumatic in/out positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Quick change/disconnect Teflon glue pot for fast glue tanks change if needed. Heat-up time approx. 10 Min. -- Pressure Section: Manual digital positioning; Teflon coated pneumatic driven roller & (2) spring loaded idle rollersWorkstations: -- End Trimming Station: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0° - 15° for straight & angle cutting. -- Top & Bottom Trimming Unit: 2 x 0.7 HP - 12.000 RPM motors, capable of tilting & pneumatic positioning for (3) settings, flush/bevel/radius trimming for quick setup. -- Corner Rounding Unit "Round 2M": corner rounding unit with (2) 0.80 HP independent motors that slide on THK guides. -- Top & Bottom Profile Scraping Unit: with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue scraping Unit: Eliminates any excess glue. -- Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°.Operator & Machine Control: -- "STARTOUCH" Controller with 12" touchscreen display, capable of storing (100) programs. -- Machine automation by PLC function and encoder positioned in the panel feed track pinion. -- Diagnostics for a quick solution to errors. Process statistics data, ie. No. of pieces/edges, and track feeding.Features & Complete With: -- 2-Speed feed-speed of 40 & 60 FPM (12 & 18 MPM); 1 x 2.5 HP feed drive motor; -- 200 Hz frequency inverter for all trimming units; -- Manual adjustable top hold-down pressure beam; -- Full sound enclosure cover and outboard panel support. -- Actual Model is SCM OLIMPIC K 560 T-ER2

SCM Olimpic K360 Edgebander Technical Specs - Edge thickness: 0,4 - 6 mm, Panel thickness: 8 - 60 mm Feed speed: 11 m/min Compressed air: 6 bar. BO06 230v/3-Phase/60Hz

SCM OLIMPIC K208ER EDGEBANDER WITH CORNER ROUNDING15/32" (12 mm) Max. edge cap., 2" max. (w/corner rounding only 1-3/4") banding height, 2-3/8" min. panel width and 6-5/16" min. length.Equipped with: -- Automatic strip & coil feed magazine w/Heavy Duty 3 mm PVC cap. guillotine. -- Teflon coated glue pot with glue roller application system complete w/automatic recycling device for unused glue. -- Digital thermostat adjustment for temperature control. -- 3-roll pressure unit w/pneumatic controls for all pressure rollers.Workstations: -- Double motor front & rear end trim (0.4 HP - 12,000 RPM motor ea.), tilts 0° - 15°, end trimmers mounted on 45° THK guide. -- Top & bottom fine/radius trimmer w/pneumatic positioning from control panel. -- Corner rounding units for leading & trailing edges. (2) 0.5 HP - 200 Cy Motors ea. -- Top & bottom PVC scraper for up to 5 mm radius. -- Top & bottom buffing unit (0.33 HP - 2,800 RPM motors). -- Hot air heating unit for PVC/ABS. -- Single 42 FPM fixed feed speed, 1 HP drive; heavy 3/4" drive chain with chain pads traveling on round & flat tracks.Complete with: -- Microprocessor for line control & glue temperature (can store up to 50 preset programs), swiveling control panel, pneumatic positioning of super finish, full cover sound enclosure, 200 Cy - 5 kW frequency inverter w/automatic motor brakes for all HF motors; includes used tooling. NOTE: Video of equipment was made in February 2021, prior to being decommissioned and placed in storage fully wrapped and ready for transport.

SCM OLIMPIC K 360TE COMPACT EDGEBANDER WITH PRE-MILLING .Specifications: -- Edge Capacity, 0.4 to 6 mm (0.016to 1/4") for strip feeding. -- Panel Capacity, min. width 65 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-1/2").Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator, pneumatic in/out positioning. -- Pre-Milling Station, RT-VP: Spindles 2 x 2.0 HP, 19,000 RPM, (1) with PLC controlled jump action and diamond cutter heads. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Manual digital positioning, (3) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station: Front & rear 2 x 0.25 HP, 12,000 RPM motors mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Trimming Unit Flush/Bevel/Radius: Top/Bottom remote (via control panel) pneumatic positioning for (3) settings, flush/bevel/radius trimming, 2 x 0.7 HP - 12.000 RPM motors with precision digital indicators for quick setup. -- Profile Scraping Unit "RAS/V": Top/Bottom, manual pre-set up with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°. Controls: -- Orion 1 Plus Controller, fixed at in-feed of machine. with soft keys, graphics and 4" LCD display panel. It handles most machine set-up functions and workstations. Complete With & Features: -- Feed-speed, 36 FPM fixed, 1 x 2.0 HP feed drive motor; 200 Hz frequency inverter for all trimming units. -- Manual adjustable hold-down pressure beam, full sound enclosure cover and outboard panel support.Condition: ATFS

SCMI OLIMPIC K 600 T-ERL EDGEBANDER (W/PRE-MILL/CORNER ROUNDING): -- Specifications:0.4 to 3 mm For roll feeding and up to 8 mm for strip feeding.Panel Capacity: Min. Panel width 60 mm (2.375"); Min Panel length 140 mm (5.5").Min./max. Panel thickness 8 - 54 mm (0.375" - 2.125"); Minimum distance between panels 508 mm (20").Feed speed 36 and 52 FPM (2.5 HP feed motor) -- Equipped With:Adjustable In-feed Fence:Manually pre-set with digital indicator, pneumatic in/out positioning. 1-Coil feeder: For banding up to 3mm thick with a 3 mm guillotine.Gluing Station:For EVA (Hot Melt) with Quick change/disconnect Teflon glue pot for fast glue tanks change if needed. Heat-up time approx. 8-10 Min.Pressure Section:Manual digital positioning: Teflon-coated pneumatic driven roller & (2) spring-loaded idle rollers. Includes "Strip Feed Magazine" -- Workstations:End Trimming Station: "K-SEL 2" Front & rear 0.5 HP, 12,000 RPM motor mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder. Top & Bottom Trimming Unit: 2 x 1.0 HP - 12.000 RPM Motors capable of tilting 0 to 25 degrees with copy wheels. Pneumatic positioning for (3) settings, flush/bevel/radius trimming via precision digital indicators to go from 3 mm PVC to thin tape through the controller for quick setup.Two Motor Corner Rounding:(2) 0.80 HP independent motors that slide on THK guides. The features of the "Round-K" (SCM patent) allow for the double function of both the simultaneous trimming and rounding operations Top & Bottom Profile Scraping Unit: "RAS/K" profile scrape station for 3 mm PVC with pneumatic positioning, with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°.Operator & Machine Control: "STARTOUCH" Controller with 12" touchscreen display, capable of storing 100 programs.Machine automation by PLC function and encoder positioned in the panel feed track pinion.Diagnostics for a quick solution to errors. Process statistics data, ie. No. of pieces/edges, and track feeding. -- Features & Complete With:1 x 2.0 HP feed drive motor; 200 Hz frequency inverter for all trimming units;Manual adjustable hold-down pressure beam;Full sound enclosure cover and outboard panel support.Adjustable side support. Replaceable track pads. Digital inverter for electronic motor braking Acoustical safety enclosure.Dust Collection: Working units are individually ported on the top of the safety enclosure for maximum efficiency.Suitable Transformer for 230V to 600V, 3 Ph. Actual model is SCM OLIMPIC K 600 T-ERL.

SCMI OLIMPIC K 800 T-FR2 EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 65 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0ø - 15ø, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12°. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Controls: -- Startouch Controller, 12" color touch screen, swivels 270° at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Options Include: Dust Manifold as pictured. -- Actual Model: OLIMPIC K 800 T-FR2

SCMI Olimpic S215 Edgebander

SCMI K230 Edgebander Manufacturer specs (to be confirmed): · Edgebanding thickness: .4mm - 3mm (.016-1/8”) · Guillotine capacity: 3.0mm · Feed speed: 30 ft/min. · Panel height: 3/8” min – 1 15/16” max · Minimum panel length: 5 1/2” · Minimum panel width: 2 3/8” · Minimum distance between panels: 22”

SCMI K360 Edgebander

SCMI K203 Edgebander Well maintained machine that is ready to ship!

SCMI K230 Edgebander Manufacturer specs (to be confirmed): · Edgebanding thickness: .4mm - 3mm (.016-1/8”) · Guillotine capacity: 3.0mm · Feed speed: 30 ft/min. · Panel height: 3/8” min – 1 15/16” max · Minimum panel length: 5 1/2” · Minimum panel width: 2 3/8” · Minimum distance between panels: 22”

2014 SCMI Olimpic K600 Edgebander Premill Corner Round Still used daily!

This machine needs some cleaning up. It is still used periodically in the current shop.

SCMI Olimpic K201 Edgebander

SNX Edgebanding heater and storage system. For straight-line and contour edgebanders which: - Keeps banding at the perfect temperature - Softens banding, making it more pliableSNX TECHNOLOGIES COIL HUB - Edgebanding heater and storage system. For straight-line and contour edgebanders which: - Keeps banding at the perfect temperature - Softens banding, making it more pliable - Increases adhesion - Decreases delamination issues - Allows a cleaner guillotine cut - It lessens the chance of chipping when trimming. This CoilHub also keeps the coils contamination-free, keeps the edgebanding easily accessible right at the machine, and can store up to 20 coils.

SNX - nVISION System2 G3, ...SEMI-AUTOMATIC CONTOUR EDGEBANDER: -- Specifications: Curved (Contour) Edgebander to allow 360° edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation as operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity: The "nVision" Contour Bander can band a minimum material size of 150 mm (6") diameter.Max. material size: 2,400 x 2,400 mm (94" x 94"); max. material weight: up to 104.5 kG (230 Lbs).Material thickness from 10 - 60 mm (0.4" - 2.36"); banding thickness from 0.5 mm thin tape w/low temp adhesive - 3 mm tape. -- Radii Capacity:Min. internal (inside) radius 80 mm (3.14"); min. external (outside) radius 30 mm (1'-18") based on 1 mm thick edge tape. &#9679 Edgebanding thickness: 1 mm, min. = R 30 mm. &#9679 Edge thickness: 2 mm, min. = R 50 mm. &#9679 Edge thickness 3 mm, min. = R 80 mm. &#9679 Panel thickness 10 - 60 mm with edge thickness 1 mm. &#9679 Panel thickness 10 - 60 mm with edge thickness 2 mm. &#9679 Panel thickness 10 - 45 mm with edge thickness 3 mm.IMPORTANT: ALL minimum & maximum radii are affected by tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape, semi or rigid. -- Equipped with:Thermal-regulated glue pot heated via (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules. (2) Pressure rollers to copy the shape of the piece; automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2.25"). -- Features: Laser for easy length identification with closed parts without the need for additional length measurement.The Laser also detects a tight radius and will automatically slow the speed + resume the set speed when the detected radius has passed.The machine is still equipped with the foot pedal for manual control/intervention. Motorized turntable for automated edgebanding application to large panels.Holding or support arm has a large interchangeable vacuum pod to secure panels for edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area. -- Complete with: &#9679 Top & Bottom Trimming unit. &#9679 Centralized control panel with individual controls for all stations to enable manual feeding of panels if desired. &#9679 Banding Station. &#9679 Edgebander Coil Stand. &#9679 Standard size vacuum pod for articulated arm. &#9679 80 mm (3") Dia. dust extraction outlet. &#9679 Foot pedal activation/deactivation control. &#9679 Larger feed roller. &#9679 QC Glue tank with sensor. -- Actual Model is: SNX nVISION System2 G3

SNX - nVISION System2 G3, ...SEMI-AUTOMATIC CONTOUR EDGEBANDER + Optional Dual Telescoping Arms for simultaneous Contour Banding & Trimming. -- Specifications: Curved (Contour) Edgebander to allow 360° edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation as operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity: The "nVision" Contour Bander can band a minimum material size of 150 mm (6") diameter.Maximum material size: 2,400 x 2,400 mm (94" x 94"); maximum material weight: up to 104.5 kG (230 Lbs).Material thickness from: 10 - 60 mm (0.4" - 2.36"); banding thickness from: 0.5 mm thin tape w/low temp adhesive - 3 mm tape. -- Radii Capacity:Minimum internal (inside) radius: 80 mm (3.14"); minimum external (outside) radius: 30 mm (1'18"), based on 1 mm thick edge tape. &#9679 Edgebanding thickness: 1 mm, min = R 30 mm. &#9679 Edge thickness: 2 mm, min = R 50 mm. &#9679 Edge thickness: 3 mm, min = R 80 mm. &#9679 Panel thickness: 10 - 60 mm with edge thickness 1 mm &#9679 Panel thickness: 10 - 60 mm with edge thickness 2 mm &#9679 Panel thickness: 10 - 45 mm with edge thickness 3 mmIMPORTANT: ALL minimum & maximum radii are affected by tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape, semi or rigid. -- Equipped with:Thermal regulated glue pot heated via (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules. (2) Pressure rollers to copy the shape of the piece; automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2.25"). -- Features: Laser for easy length identification with closed parts without the need for additional length measurement.The Laser also detects a tight radius and will automatically slow the speed + resume the set speed when the detected radius has passed.The machine is still equipped with the foot pedal for manual control/intervention. Motorized turntable for automated edgebanding application to large panels.Holding or support arm has a large inter-changeable vacuum pod to secure panels for edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area. -- Complete with: &#9679 Top & Bottom Trimming unit .&#9679 Centralized control panel with individual controls for all stations to enable manual feeding of panels if desired. &#9679 Banding station. &#9679 Edgebanding coil stand. &#9679 Standard size vacuum pod for articulated arm. &#9679 80 mm (3") Dia. dust extraction outlet. &#9679 Foot pedal activation/deactivation control. &#9679 Larger feed roller. &#9679 QC Glue tank with sensor. -- Options include:(1) Additional Telescoping Actuator arm & foot pedal

SNX - nVISION G2, ...Semiautomatic Contour Edgebander: -- Specifications: Curved (Contour) Edgebander to allow 360° edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation as Operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity: The "nVision" Contour Bander can band a minimum material size of 150 mm (6") diameter.Max. material size of 2,400 x 2,400 mm (94" x 94"); max. material weight up to 104.5 kG (230 Lbs).Material thickness from 10 - 60 mm (0.4" - 2.36"); banding thickness from 0.5 mm thin tape w/low temp adhesive - 3 mm tape. -- Radii Capacity:Minimum internal (inside) radius of 80 mm (3.14"); minimum external (outside) radius of 30 mm (1'18") based on 1 mm thick edge tape. &#9679 Edgebanding thickness 1 mm, min = R 30 mm &#9679 Edge thickness 2 mm, min = R 50 mm &#9679 Edge thickness 3 mm, min = R 80 mm &#9679 Panel thickness 10-60 mm with edge thickness 1 mm &#9679 Panel thickness 10-60 mm with edge thickness 2 mm &#9679 Panel thickness 10-45 mm with edge thickness 3 mmIMPORTANT: ALL minimum & maximum radii are affected by tape thickness, quality of adhesive and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape, semi or rigid. -- Equipped with:(1) NEW Thermal-regulated glue pot heated via (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 KG (2.2 LBS) of granules. (2) Pressure rollers to copy the shape of the piece, automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2.25"). -- Features: TRIAX 3-AXIS Laser System (patented) for tighter butt joints & easy length identification with closed parts without the need for additional length measurement.The Laser also detects a tight radius and will automatically slow the speed + resume the set speed when the detected radius has passed.The machine is also equipped with the foot pedal for manual control/intervention. Motorized turntable for automated edgebanding application to large panels.(2) "Heavy Duty" Articulating arms to support the parts during edgebanding and trimming & to maximize production throughput. Arm has a large inter-changeable vacuum pod to secure panels during edging and trimming. NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area. -- Complete with: &#9679 Top & Bottom Trimming unit &#9679 Centralized control panel with Simple PLC Touchscreen Interface with individual controls for all stations to enable manual feeding of panels if desired &#9679 Banding station &#9679 Edgeband coil stand &#9679 Standard-size vacuum pod for articulated arm &#9679 80 mm dia. (3") dust extraction outlet &#9679 Foot pedal activation/de-activation control &#9679 Larger feed roller &#9679 QC Glue tan