Woodworking Equipment For Sale

Friulmac Rondamat E End Matcher

Friulmac Floormat EQ Double end TenonerEach side equipped with top & bottom trims and (1) cope heads.Capacity: -- 1,500 mm ( 59") Max. x 225 mm ( 8.86") min. opening; -- Width 30 mm (1.18"), 250 mm (9.84") -- Thickness: 10 mm (.39") min. 35 mm (1.38") max.Includes: -- Motorized opening with LCD touch screen on the control panel, -- Hopper feed Each side equipped with: -- 1st Head: Top scoring or trim saw, 4 HP motor, saw blade max 150 mm diam. with 30 mm bore, rotation 8,500 RPM. -- 2nd Head: Bottom scoring or trim saw, 4 HP motor. saw blade max 150 mm diam. with 30 mm bore, rotation 8,500 RPM -- 3rd Head: High speed Vertical cope head, 7.5 HP - 6,800 RPM, minimum tool diameter 160 mm, maximum 220 mm, arbor diameter 40 mm. -- Variable speed feed from 4 to 25 meter/min. -- SIEMENS "Simatic" Touch-screen control for most machine functions; important station adjustments with mechanical digital readouts; manual hopper feed with 9" max. width. -- Feed system with: Rubber top chain pads, overhead holddowns with continuous V-type belts.Complete with: -- Full safety sound enclosure and separate operator control console. -- Voltage transformewr for 460 volts (to be confirmed)

FRIULMAC - Dual Feed: Double End Cut-Off SawFor squaring the workpieces and for transportation to a Planer or Moulder with a straightening table. -- 59" Max. (1,500 mm) opening from Saw to Saw; motorized opening with LED readout on the control panel; left hand fixed with left-hand fence line. -- Hopper Magazine, material capacity: Min. length 7.87" (200 mm); max. 59" (1,500 mm); width 1-1/8" (30 mm) to 4-3/8" (110 mm); thickness 0.59" (15 mm) min.; up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side equipped with: -- (2) Trim saw motors: 5.36 HP Each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit with: 3 HP (2.2 kW) Motor. -- Trimming & throughput capacity: Up to (40) pieces per minute..

FRIULMAC - Dual Feed: Double End Cutoff SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table. -- 59" Max. (1,500 mm) opening from Saw to Saw: Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper magazine - material capacity: Min. length: 7.87" (200 mm), max. 59" (1,500 mm); width 1-1/8" (30 mm) to 4-3/8" (110 mm); thickness 0.59" (15 mm) min., up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side equipped with: -- (2) Trim saw motors: 5.36 HP each; saw blade dia.: 9.84" (250 mm). -- Hydraulic feed drive unit with: 3 HP (2.2 kW) motor. -- Trimming & throughput capacity: Up to (40) pieces per minute..

FRIULMAC - MULIREX: End Matcher with: Stackable SpindlesEnd Matcher with: Stackable Spindle for fast Changeover!Equipped with: -- (2) Profiling Motors: 10 HP (7-1/2 kW). -- (2) Tool changer motors: 1/2 HP (0.25 kW). -- (2) Infeed/Outfeed conveyor belt motors: 1-1/2 HP (1.10 kW). -- Central conveyor belt: 3/4 HP (0.55 kW). -- Min. part length: 4-7/8" (120 mm). -- Min. part width: 1-3/16" (30 mm). -- Max. part width: 9-7/8" (250 mm). -- Min. part thickness: 1/2" (10 mm). -- Max. part thickness: 1-3/16" (30 mm). -- Min. cutter diameter: 6-5/8" (170 mm). -- Max. cutter diameter: 7-7/8" (200 mm). -- Diameter spindles: 50 mm. -- Spindle length: 11-1/4" (285 mm) under the nut for stackable tooling. -- Cutter speed: 9,000 RPM. -- Dust ports: (4) 4-3/4" for each spindle (2 on the top & 2 on the rear side).

FRUILMAC - RANDOMAT E: End MatcherFor end matching flooring, cabinet & entry door rails, or tongue & groove. The feed through system allows continuous feeding of random length parts with any kind of profile. -- Capacity & Description -- Width cap.: 1-3/16" x 9-7/8'; Length cap.: 6-5/16" x 137" (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10) cycles/Min depending on part length & width. -- Feed System with: (2) 120" Long x 10" wide powered infeed & outfeed belt conveyors; parts are automatically fed & positioned with sensors. -- Positive stop to the 1st vertical shaper head (2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head; automatically reversed & positioned to a positive stop for the 2nd cut on the other end of the part. - At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7-1/2 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Cutting station with: Overhead holddown wheels; 4-point pneumatic clamping with: (2) Overhead & (2) horizontal clamps. -- Controller & Operator Interface: Keypad: SIEMENS Controller; PLC controlled conveyor & shaper cut cycle for automatic operation; variable feed speed conveyor line; shaper head advance with LED readout on the controls. -- Includes Infeed & Outfeed Conveyors.

FRUILMAC RANDOMAT E - End Matcher; -- For End Matching flooring or cabinet & entry door rails or tongue and groove. The feed-thru system allows continuous feeding of random length parts with any kind of profile.÷Capacity & Description: -- Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10) cycles/Min depending on part length & width; -- Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors. -- Positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors which pneumatically traverse in tandem for each cutting cycle. -- Cutting station with overhead hold-down wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. -- Controller & Operator Interface: Key Pad SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. -- Includes Infeed and Outfeed Conveyors

FRIULMAC Quadramat Single End TenonerSingle end tenoner with (4) heads with Jump cope, cope, disc sanding and disc sandingSpecifications: -- Workpiece Length: 125 - 1500mm -- Workpiece Width: 125-1500mm -- Workpiece Thickness: 13 - 40mm -- Configuration: Jump-Cope, Cope, Wheel-Sanding, Wheel-Sanding -- First Station: 7.4 HP Jump-Cope/Profiling Unit with 40mm Diameter Shaft, 6000 RPM Rotation -- Second Station: 7.4 HP Cope/Profiling with 40mm Diameter Shaft, 6000 RPM Rotation -- Thirds Station: 4.7 HP Sanding Wheel -- Fourth Station: 4.7 HP Sanding Wheel -- Variable Speed Control of Sanding Stations from 750 - 1400 RPM -- Feed Speed: 13 - 98 FPM

FRIULMAC - Dual-Feed, ...Double End Cut-Off SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table.Specifications: -- 79" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper Magazine - material capacity: Min. length: 7.87" (200 mm), max.: 79" (2,000 mm); width: 1-1/8" (30 mm) to 6-3/4" (170 mm); and thickness: 0.59" (15 mm) min. up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side is equipped with: -- (2) Trim saw motors, 5.36 HP each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit: 4 HP (3 kW) motor. -- Trimming & throughput capacity: Up to (55) pieces/Min.NOTE: Voltage transformer for 600 Volts available with the machine

FRIULMAC Quadramat Double End Tenoner:This machine is set up with (4) four profiling units left and right for a total of (8) eight -- 1,500 mm (59") Max. x 95 mm (3.7") min. opening -- Loading space 1,041 mm (41") -- Thickness 10 - 100 mm (0.4" to 3.9")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorized opening with LED readout on the control panel, approx. 25" infeed in front of hold downs. -- Variable speed feed 6-28 M/min. , feed motor 4.5 HP -- Feed chain 2-7/8" wide with rubberized pads -- Top pressure with non-stainable stretching wheels driven by gear motor and inverter with speed adjustment synchronously to chain feeding speed -- Infeed fence on left side -- Machine left side fixed, right side adjustable -- Complete control panelWorking Stations: -- 1st station: Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 2nd station Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 3rd Station : Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 4th Station: Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm NOTE: machine will require some rebuilding and maintenance in regards to ball screws and Dovetail Guides per statement by current owner. They are replacing it with a new machine.

2002 Randomat E Endmatcher Manufacturer’s Specifications Working cap.: width 1-3/16" to 9-7/8"; thickness 3/8" to 1-3/16" and length 7" to ??? Feed: (2) 5.5 HP motors for infeed and out feed 10" x 120" belt conveyors. Positioning motor (2) 1.5 HP to shaper heads for tongue and groove. Sensor activated stops for true cut positioning. Approx. 10-12 cycles per minute. Profiling: (2) shaper heads 7.5 HP with 7,500 RPM with spindle dia. 40mm. Tool cutting circle to 8-5/8

Friulmac Dualfeed Double End Chop Saw & Moulder Feeder Friulmac Dualfeed Automatically Trims Workpieces and Feeds into a Moulder Cutting Length: 200mm - 1500mm (8" - 59") Cutting Width: 30mm - 110mm (1.2" - 4.3") Cutting Thickness: 15mm - 60mm (0.6" - 2.4") Trim Saw Motors 5.5HP (4KW) Feed Motor 3.5HP (2.64KW) Anti-Kickback Spring-loaded Top Pressure System w/ Manual Adjustment and Readout Manual Board Length Adjustment w/ Readout Manual Blade Height Adjustment w Readout Hopper Fed Voltage: 460V 3PH

- End Matcher for the Continuous Feeding of Random Length Work Pieces - Minimum Working Length: 160mm (6.3") - Working Width: 30-250mm (1.18"-9.84") - Working Thickness: 10-30mm (0.39"-1.18") - Two 7-1/2 HP, 3ph Profiling Motors - Spindle Speeds: 6,800 RPM - Spindle Diameters: 40mm - Cutterhead Feed Motor: 1 HP - Two 1-1/2 HP Motors for Infeed/Outfeed Conveyors - Infeed/Outfeed Conveyor Sizes: 123" x 11" - Sound/Safety Enclosure - New in 2004 - Current Voltage: 460V

Sanding wheel shaper for the production of profiles on the sanding wheels. -- Template carrier holds metal or plexiglass template (same as can be used on the moulder knives). -- Spindle length 5" with 1" diameter arbor for wheel support. Handles 8" diameter wheels (3) included with the machine. -- X and Y axis on dovetail slide with lineal bearing support for smooth movement during the wheel grinding. Pneumatic clamping on grinding wheels. Depth of grinding 1.5" for raised panel. -- Tilt capabilities from 0 to + 30°. -- Grinds all types of varda wheels on 1 HP motor with speed of 1,750 RPM. --You can customize this machine to you needs.

GANNOMAT INDEX 280 TREND CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:CNC Controlled horizontal Point-to-Point Drilling, Gluing & Dowel Inserting Work Center for absolute, incremental, variable (parametric) programming of boring patterns. -- Working Field(4) Independent zones for individual processing of (1 - 4) pieces. Pneumatically activated Stop system (side fences) consisting of: Right-hand, left-hand, and center stop. Max. single part Length 2,800 mm (110"). As a 2-zone: LH & RH is 1,400 mm (55") each part. As a 4-zone with center fence: LH/RH is 700 mm (27.5") each part.Min/Max. Material Thickness 0.50" - 3.125" "X" Axis Positioning Speed 246 FPM (75 MPM) and driven by rack & pinion for fast acceleration/deceleration of working unit. "Y" Axis is set by mechanical digital counters. "Z" Axis is NC controlled height adjustment for boring/inserting units. -- Hold-down Clamps:Total of (10) pneumatic, "quick change" Hold-down Clamps. -- Dowel driving & horizontal boring:Integrated into (1) station; the Dowel Driving Unit is located alongside the Boring Station; both units are mounted on (1) support. -- Horizontal Drilling Spindle:Can be setup for 6 - 8 or 10 mm; dowel length from 25 - 50 mm. -- Doweling Station includes:Vibrating hopper with: (1) Single drop device and (1) outlet tube; insertion head & dowel driving with air impulse.Mechanical dowel diameter & dowel length control prevents the insertion of any oversized dowels. -- Glue Valve/Amount:Controlled via software and can be adjusted by milliseconds; (2) standard separate stainless steel 1.5 gal. pressurized tanks (one for glue, one for water to clean/purge the glue tubes. -- Operator Interface:GANNOMAT + BECKHOFF "C3640 Twincat" PLC Operating System.15" Touch-Screen color monitor; network card (for online operation); serial, parallel, USB ports. -- Actual model is: GANNOMAT INDEX 280 TREND. NOTE: Machine is currently setup for 8 mm dia. x 35 mm long dowels.

Boring/Inserting aggregate travel on profile bearing guides with: 3 spindle boring unit – Horizontal 1 Spindle Routing unit – Horizontal 1 Blowing, gluing, dowel inserting unit for a single selected dowel 6 – 12mm diameter, 25 – 60 mm length – Horizontal Barcode reader Fully automatic electronically controlled central lubrication Closed gluing system with variable setting of glue amount by touch screen Selector switch GLUE/WATER for quick rinsing of entire system 1½ gallon glue Stainless steel container 1½ gallon water Stainless steel container Glue control warning light 1 Right-hand stop, 1 left-hand stop, and 1 center stop, all removable (3) Starting buttons for individual processing of 1-4 work pieces (8) Pneumatic clamping cylinders for work piece thickness max 80mm, work piece length minimum 70mm 1 Exhaust ducting, with connection diameter 80mm Programming by menu-based software; Beckhoff 15? Touchscreen display Operating system: WINDOWS 7

Gannomat Pro-Line 50 • Row of holes as well as line drilling in the SYSTEM 32 mm • 50 (2 x 25) holes in one drilling cycle

GANNOMAT - INDEX 130 LOGIC: CNC Bore, Glue & Dowel Inserter -- SpecificationsGANNOMAT "INDEX LOGIC": CNC Controlled Point-to-Point Drilling/Gluing/Dowel Insertion Machine for variable programming of boring patterns. -- "X", "Y" & "Z" Axis set by manual digital indicators. -- Working Width1,300 mm (51") x 3/4" - 7-3/4" Width x 1/2" - 3-1/8" material thickness with: (4) Independent working zones & LH/RH (mirror image).Table size: 4-1/2" x 52-3/4" x 35" H with 9" x 52" extension. -- (8) Vertical hold-down cylinders & zero center stop for horizontal part processing. -- Dowel Driving & Horizontal Boring: Integrated into (1) station; the dowel driving unit is located alongside the boring station; both units are mounted on (1) support. -- Horizontal Drilling & Boring Station: Head can be setup for 6 - 8 or 10 mm, dowel length from 25 - 50 mm (currently set up for 8 mm dia. x 50 mm long dowels). -- Doweling Station: Vibrating hopper; insertion head & dowel driving with air impulse; glue valves are controlled individually at the control cabinet; central adjustment for the amount of glue by means of a digital timer. -- Operator Interface: MS-XP & GANNOMAT Production software; 15" color touchscreen monitor interface; USB drive; bar code capable. -- Controller & Drive: BECKHOFF "C3620 TWINCAT V2.10". -- Complete with: (1) Glue tank; (1) water tank; auto lubrication system, and all original manufacturer's machine documentation. -- Actual Model is: GANNOMAT INDEX 130 LOGIC.

GANNOMAT - CONCEPT 70 ECO PLUS: Case Clamp (Semi-Automatic): -- SpecificationsMultipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams specially designed to save time & labor. -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Working CapacityLength: Min. 6" (150 mm); max. 98.4" (2,500 mm); height: Min.: 6" (150 mm); height max.: 51" (1,300 mm); depth max.: 27-1/2" (700 mm). (2) Potentiometer for stepless adjustable pressing force; adjustable clamping cycle time with automatic opening.Minimum pressing force: 300/500 kG; max. pressing force: 2,200 kG.(4) Pressing velocities & adjustment rates: 5 /10 / 25 / 50 mm per Sec (with fine positioning/creep feed). -- Operator InterfaceElectronic controller with Keypad for the following functions: Manual operation; (6) individual push buttons for: (8) Motion sequences; pressure regulation; workpiece count; clamping dwell time. -- Actual model: GANNOMAT CONCEPT 70 ECO PLUS.

GANNOMAT - 260: Case Clamp (Semi-Automatic): -- Specifications 100" x 50" x 26" Clamping Cap.; (3) vertical combination air cylinders & shoes mounted on horizontal beam for top pressure; 0.33 HP motor for up/down travel. -- (2) Combination air cylinders & shoes mounted on adjustable vertical, side pressure beam.Vertical beam locks in place with: (4) Air cylinders and rides on bearings for quick and easy positioning. -- Push button operated with: Independent pressure control for top or side; air pressure up to 125 PSI (Clamp shoe assemblies are interchangeable from vertical to horizontal). -- Complete with: -- Pressure gauges and timer control with (0 - 30) Min setting.