Woodworking Equipment For Sale

Newman T-20 MortiserSpeifications -- 0.5 HP Motor, push button magnetic starter, foot treadle operation, with compound tilting table, manual holddown.

This Newman HP-688 press is powered by a 10 HP hydraulic pump. It consists of two 30? X 74? bays. Each bay has (3) individual 24? X 30? platens. Each platen is 15/16? thick and it’s back structure is webbed every 5-1/2? X 7-1/2?. Each platen is driven by a 5? hydraulic cylinder with it’s own control. The max daylight opening is 48? while the minimum is 37?. On the bottom you will find pop up bed rolls. Over all the press is in excellent condition, is extremely heavily built. This fully functional machine has been fully cleaned, checked, and is ready to work

Newman KF-24 Gang Rip Saw

Manufacturers Specifications Max Width of Material: 12 in 12-14” blade capacity Production Rate: 45-50 cuts per minute designed for 45 degree vertical cuts Work Tables: 60 inches to the right and left of the saw, Motors: (2) 2.5 HP (3,600 RPM). 220/60/3PH.

NORDSON DURABLUE 16 1069743A 16 L Hot Melt Glue UnitSpecifications: -- Tank cap. 16 L (4.23 Gallons). -- Melting rate 27.7 Lbs./Hr. -- Temperature range 100° - 400° F.Complete with: -- Gun. -- Heated Hose. -- Cart.

NORFIELD - 250-M: Strike Router -- Strike Router capacity: 9' Length x 1-5/8" thickness cap.; infinite width; mortising plate & bolt relief in: (1) Continuous operation. -- 1-1/2 HP Router: Processes any strike up to 4-7/8" long, including T-strike. -- Rectangular relief leaves more wood in jamb for greater strength and more professional appearance.

NORFIELD - 5000 + 5100 + 5200 Package: Door Line. - Used NORFIELD Door Line includes: NORFIELD - 5000: Door Machining Center. NORFIELD - 5200: Automated Door Loader. NORFIELD - 5100: Assembly Center.NOTE: The following information/specifications are provided for reference and needs to be verified by Buyer prior to purchase. -- Door capacities: 1-1/2' to 3-1.5' Wide x from 6-1/2' to 7'-0" tall x from 1-3/8" to 1-3/4" thick. Jamb capacities: 2-1/2" to 10-1/2" wide x 6-1/2'" to 7'-0" tall x from 1/2" to 1-1/2" thick. -- For flush, stile, and rail; and louvered doors and: Flat, split, & rabbeted jambs. -- For lock: 2-3/8" & 2-3/4" backsets; hinge mortising for: 3-1/2" x 3-1/2" & 4" x 4" x 5/8" Radius; faceplate router up to: 1-1/4" x 2-3/4"; hinge radius of: 5/8"; hinge pattern adjustable from: 29" - 33" center-to-center. -- Machining cycle: Under (30) seconds. -- Door clamps up: Eliminating changeover for interior & exterior doors. -- Lock drilling from underside of door enables operator to: View exit cut & provide quality control. -- Automatic butt routing system with: Chip breaker for clean mortising. - Automatic changeover: Between 3-1/2" x 3-1/2" & 4" x 4" hinge mortising. -- Automatic lock machining; drills for lock & latch and routes for the faceplate in: (1) Cycle; centrally located electrical panel provide: Safe & easy operation. -- Automatic changeover for: Interior & exterior doors; eliminates adjustment time. -- Microprocessor technology: Minimizes maintenance downtime. -- 6 CFM @ 90 PSI; 1,900 CFM @ 8" Dust outlet.NOTES: -- All equipment as taken from service. -- Does not include: Setup or installation; freight. - Available at additional cost. -- Photos describe the machinery as it was removed from service and not in reconditioned form. -- This equipment was installed adjacent to a KVAL COMMANDER Door Machine and kval 555 Door Sizer/Beveller and shared with a Norfield Door Loader. See DM-010597

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6q NORTHFIELD 12HD 12" Heavy-Duty Jointer Specifications: Max. depth of cut 5/8", Rabbeting cap. 5/8" x 12". 17” x 51-1/2” x 32-1/2” H. Outfeed table size 17” x 43” x 32-1/2” H. Equipped with: 3-1/2” Dia. 3-Knife Cutterhead. 5 HP - 1,735 RPM Motor. 52” L x 5-1/2” H Cast-iron fence, with 0° - 45° Tilt. Swing-away guard.

NORTHFIELD Unipoint X-36A Radial Arm SawSpecifications: -- 5 HP Direct motor drive, 16" max. blade dia. x 1" dia. arbor, 4-1/2" max. depth of cut, 1-9/16" max. dado cap. -- 25" Max. crosscut (17-1/2" w/fence in normal position) and 31" max. ripping cap. (23-1/2" w/fence in normal position). Maximum 45 degree Miter:Guide Fence Regular Position 4" x 12-1/2"; moved to rear 4" x 14-1/2"; max. 70 degree miter; guide fence regular position 4" x 6"; moved to rear 4" x 8-1/2". Max. compound 45° miter 3" x 12-1/2"; motor raises to center of arbor to table top, max 10"; motor lowers center of arbor to table top, min. 3-5/8".Saw tilts to left 45°; saw pivot to right 70°; saw pivot to left 45°.Complete with: -- Safety guard w/kickback preventer, automatic blade return device & push button magnetic controls; 25" x 48" table; 32" table height.Approx. 1944 Monarch Unipoint Radial Arm Saw with I believe additional US government wartime tagging. The original designers and manufacturer of the Unipoint Radial Arm Saw that Northfield bought the rights to and still makes today.

NORTHTECH NT-610HC Double Surfacer:Specifications:: -- 24" x 8" Cap., min. Material length: 12". Table size is 111" x 24". -- 40 HP top and 30 HP bottom belt-driven motors -- Minimum working length is 12" and minimum working thickness is 1/4". -- Variable feed speed 20 - 110 FPM powered by a 3 HP feed motor -- Feed works driven via gearbox and heavy-duty Cardan Shaft Drive -- 1 HP motor for table raise & lower and (4) ball screws. -- Both cutter heads are spiral insert knife heads with 30 x 12 x 2.5 mm insert-type knives.Features: -- Rugged cast iron and plate steel fabrication; -- Infeed conveyor/carpet (spiked) allows precision jointing accuracy, especially on warped or twisted lumber. -- Computerized top cutterhead positioner is accurate to +/-0.001"; -- Chromed beds; Guards and skirts for operator safety. -- Machine dimensions: L2830 x W185 x H1700 mm, Weight: 10,500 Lbs -- Dust Collection: 3600 CFM

NORTHTECH NT 1000-50HCVS Single-Sided 40" PlanerSpecifications: -- 40" Planer, 40 HP main motor, Helical Head, Adjustable bed rollers 15 mm x 15 mm x 2.5 mm Carbide Insert cutters. -- The spiral cutterhead provides a high chip removal rate, superior surface finish and low noise. -- Powerful 40 HP cutterhead motor makes this planer ideal for heavy-duty planing and meets high production requirements. -- Variable feed speed is mechanical variable from 0 - 90 FPM. -- Power elevation of the feed bed with "727 M Digital Table Adjustment" for fast accurate, and convenient thickness setting. -- Extra heavy rib reinforced cast iron table, surface precision ground. Equipped with: -- (4) Powered steel bed rollers. -- (4) Upper rollers. -- (2) Powered corrugated infeed rollers. -- (2) Powered urethane outfeed rollers. -- Upper and lower limit switches for opening control. -- (4) Dual 50 mm jack screws for raise/lower bed movement; 12" max opening. -- 2 HP Elevation motor with manual adjust. -- Rear E-Stop for added safety. -- Dual 6" dust ports requiring 1,000 CFM @ points of extraction.

2007 Northtech NT-CS14R-53 3 phase 460 volts 5 horsepower SN 07113 Operates good

Manufacturer’s Specification - 15HP Motor + 1HP feed motor (with Wye Delta soft start) - Mechanical variable speed (45' – 100' FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”. - Bottom & top kickback fingers - Rack and pinion fence for precise and quick positioning. - Digital electronic oiler provides maximum chain and race life. - 15-1/2? distance from column to blade. - 8' glue line tolerance.

Multiple Rip Saw with One Fixed and One Moveable Blade Two 10 HP Saw Motors, One for Each Blade Width of Fence Movement from Fixed Blade: 0" - 9.45" Moveable Saw Blade Traverse (From Fixed Blade): .78" - 8.35" Minimum Working Length: 12" Maximum Cutting Thickness: 2.56" Maximum Width of Cut from Fence: 17.71" Saw Blade Diameter: 12" Arbor Diameter: 1" Arbor Speed: 4,500 RPM Aluminum Chain w/ Rubber Slat Inserts Width of Feed Chain: 11-3/4" Feed Motor: 2 HP Variable Speed Feed from 39 - 98 FPM Three Rows of Upper Anti-Kickback Fingers Width Setting Drive Motor: 2 HP

Northtech NT SLR-16SC Precision 16″ Straight Line Rip Saw FEED SYSTEM --Saw motor: 15HP, 3PH 230/460V -- Feed: 1.5HP variable from 40′ – 120′ FPMPRODUCT DIMENSIONS -- Min. thickness: 3/16″ -- Max depth of cut: 4-1/16″ with 16"; Blade -- Max depth of cut: 3-1/16"; with 14"; BladeSpecifications: -- Direct Drive = Direct Drive -- Feed Hp. = 1.5 Hp. -- Feed System = 4"; Split Chain with True Trac -- Feed Speed = 40-120 FPM -- Assisted Start = Wye Delt"; -- Throat Capacity = 18-1/4"; -- Min. Length = 12"; 2nd Roller to Kickback -- Min. Thickness = 3/16″ -- Max. Thickness = 4-1/16"; W/ 16"; BladeGlue Line Rip = Guaranteed 12′ 4/4 stock @ 50 FPMEquipped with & Features -- Blade Size = 14"; Tungsten Carbide Tipped -- Dust Collection = 1417 Total CFM -- Dust Port Out = 4"; Top 6"; Bottom -- Arbor Diameter = 2″ Arbor -- Idle Rollers = (8) Idle Rollers -- Hold Down Style = 8 Spring Loaded Hold Downs -- Kickback Finger = (59) Lower (32) Top -- Automatic Mechanical Oiler -- Low Oil Warning = Low Oil Shut-off -- Laser = 100mw Laser Light & Mount Bracket

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5z NORTHTECH NT-EV-920RC DUAL HEAD WIDE BELT SANDER 2-Head wide belt sanding machine with 37" capacity. - Heads: 1st head: 8-1/4" Dia. grooved rubber contact roll, with 20 HP motor. 2nd head: Combination finishing platen with grooved rubber roller and polishing pad, with 15 HP motor. Two (2) infeed and outfeed spring loaded hold-down rollers; 2 HP variable speed feed drive. Sanding belt size: 37" X 85" and with electronic belt tracking. Motorized opening between the conveyor and sanding bed. Ammeters for measuring motor loads.

Northtech NT-KL-43C-A Wide Belt Sander 43” Capacity Single Combo Head 230 Volt 3-Phase spare parts as pictured

6” width capacity 8” thickness capacity 30 hp main motor, 1.4 hp feed motor 3 hp blower motor…460 volt 3 phase 559 rpm blade speed digital oiling

Northtech 12" Resaw Model NT-HBR12V Self contained hydraulic pack

NORTHTECH - NT-KL-920-PRK- B & NT-KL-920 PRK-U, ...Top & Bottom 3-Head Planer Sander3-Head bottom with: Planer, drum and platen; 3-head top with: Planer, drum, and platen 920 mm (36") wide.Capacity: 36" x 5" thickness.SpecificationsBottom Machine Model: "NT-KL-920 PPR". -- Infeed driven Conveyor: 37" x 72" Long. -- 1st Head: Spiral cutterhead; (8) rows of 15 x 15 x 2.5 mm inserts carbide knives; (4) sides for rotation; low tool cost.Cutterhead: 175 mm (7") Dia. and 50 HP motor. Segmented chip breaker before the cutterhead. -- 2nd Head: Contact roller; (280 mm) 11" in dia.; 70 durometers, powered by a 40 HP motor; running at 3,600 FPM belt speed.Sanding belt size: 85" x 37". -- 3rd Head: 3-1/4" Pneumatic Polishing Platen; engineered as a combination station, air-cushioned & adjustable in pressure to various grits and materials application. Powered by a 30 HP motor. -- Lifting & lowering conveyor bed; 1-1/2 HP motor (includes auto. thickness setup device). -- Variable speed: 7.5 HP; inverter duty motor integrated with an AC inverter (VFD); control providing variable feed rate from 15 - 70 FPM for heavy calibration; LED readout feed speed indicator. -- Microprocessor Control for: Conveyor bed positioning to high precision via keypad entry. -- Automatic electronic preset panel thickness gauge/micrometer. -- Automatic Air Jet blast cleaning system on both sanding heads.Top Machine Model: NT-KL-920 PRR-U -- 1st Head - Spiral Cutterhead: (8) Rows of 15 x 15 x 2.5 mm inserts carbide knives; (4) sides for rotation; low tool cost.Cutterhead: 7" (175 mm) Dia.; 50 HP motor.Segmented Chip Breaker: Before the cutterhead. -- 2nd Head - Contact Roller: 11" (280 mm) Dia.; 70 durometers; powered by 40 HP motor; running at 3,600 FPM belt speed.Sanding belt size: 85" x 37". -- 3rd Head - 3-1/4" Pneumatic Polishing Platen: Engineered as combination station; air-cushioned & adjustable in pressure to various grits and materials application; powered by 30 HP motor. -- Lifting & lowering Conveyor Bed: Motor 1.5 HP (includes auto. thickness setup device). -- Variable speed 7.5 HP inverter duty motor; integrated with AC inverter (VFD) control; variable feed rate: 15 to 70 FPM for heavy calibration; LED readout feed speed indicator. -- Microprocessor Control: For conveyor bed positioning to high precision via keypad entry. -- Automatic electronic preset panel thickness gauge/micrometer. -- Automatic Air Jet blast cleaning system on both sanding heads. -- Powered dropdown Conveyor between Bottom & Top machine.Features (includes both machines) -- Massive monoblock base: 3/4" Thick plate steel weldments. -- Large dia. roller hold-downs; ball bearing supported; 65 duro UV rubber are standard features. -- Automatic soft start of main motors (Y-Delta). -- Disc braking/emergency shut down protection for: Sanding belt breaking, non-tensioned sanding belt; and mistracking of sand belt. -- All motors & electrics are CE-approved. -- Electronic oscillating belt tracking system. -- Au