Woodworking Equipment For Sale

SANDINGMASTER SA3300-900 TRIPLE HEAD WIDE BELT SANDER3-Head, 36" max. width cap. - 1st Head: 11" Dia. rubber covered contact roll, 24 HP motor; 2nd Head: 11" Dia. rubber covered contact roll, 18 HP motor; 3rd Head: Combination head with rubber covered contact roll and finishing platen, 18 HP motor. 37" x 75" Abrasive belts with electronic tracking. -- 2-Speed conveyor feed, 23 & 46 FPM, 1.0/1.7 HP motor, 0" - 6" motorized part thickness with LED readout, a joystick lever controls raise and lower of feed bed and start and stop of conveyor belt, also includes "SP-Matic" automatic part thickness setup. -- Thin veneer sanding package with rigid table setting for solid wood dimensioning and floating table setting for veneer sanding, infeed and outfeed spring loaded holddown shoes. -- Includes: Motor load meters, electronic brakes on sanding heads, infeed safety shutoff bar and 18" infeed conveyor area. Actual model "SA-3300-900".

SAVI HFK-250 Veneer Guillotine; General Specs: -- 102.4" (2,600 mm) Width cap., 4" daylight opening, hydraulically operated knife, 4 HP Leroy-Somer motor powers hydraulic unit with reservoir. -- Originally fitted with motorized parallel fence with 0.5 HP two speed gearmotor drive, push button operated, adjustable from 1" - 50" with magnified tape reader in front of machine. -- Equipped with: 2nd Cut feature with automatic reset, laser guide line light, photoelectric barrier guard for knife & hold-down beam, 2-hand operation of knife cycle. -- Note: Rear fence has been removed or modified. Shaft has chain/sprocket.

SAWSTOP - ICS 53230-52, ...10" Table SawSpecifications: -- 10" Blade cap.; 5 HP motor; 3-1/8" depth of cut @ 0°; 2-1/4" depth of cut @ 45°; 13/16" max. dado width; 5/8" arbor diameter. Features: -- Enclosed cabinet; Heavy-Duty belt drive; cast iron trunnions; SAWSTOPS's revolutionary flesh detecting safety mechanism.Includes: -- 52" T-Glide Rip Fence; sliding crosscut table; side support table; 4" dust collection port. -- Magnetic contactor motor control; main power switch with removable lock-out key.

SAWSTOP - ICS 73230, ....Table Saw w/Safety "Stop Feature"Specifications: -- 10" Blade cap.; 7-1/2 HP motor; 3-1/8" depth of cut @ 0°; 2-1/4" depth of cut @ 45°; 13/16" max. dado width; 5/8" arbor dia. -- Features: -- Enclosed cabinet; Heavy-Duty belt drive; cast iron trunnions; SAWSTOPS's revolutionary flesh detecting safety mechanism. -- Includes: -- 52" "T-Glide" rip fence system; side support table and laminated top; 4" dust collection port; magnetic contractor motor control; main power switch with removable lock-out key. Actual model is: "ICS 73230"

SAWSTOP - 10", ...Table SawSpecifications: -- 10" Blade cap.; 3 HP motor; 3-1/8" depth of cut @ 0°; 2-1/4" depth of cut @ 45°; 13/16" max. dado width; 5/8" arbor diameter. Features: -- Enclosed cabinet, Heavy-Duty belt drive; cast iron trunnions; SAWSTOPS's revolutionary flesh detecting safety mechanism. -- Includes: -- 50" Rip fence; side support table and laminated top; 4" dust collection port. -- Magnetic contactor motor control; main power switch with removable lock-out key. Actual model #: ICS 31230

5 HP motor with 8" or 10" blade cap. -- Features: SawStop Safety System, blade stops and retracts on accidental contact, protection is always on, performs continuous self checks, invisible protection, does not interfere with work, compatible with all standard blades; works on all woods and non-conductive materials. -- Includes bypass switch for cutting metal. European style riving knife to minimize kickback; Low profile blade guard for narrow cuts; Quick-change mount for guard and riving knife ÷Large start/stop paddle for hands-free shut off; Main power switch with removable lock-out key; Magnetic contactor motor control; Blade shroud for improved dust collection; Zero-clearance insert; Extra heavy castings ÷Widely spaced trunnions; Infinitely adjustable trunnion assembly for precision alignment. -- Also includes: Vertical slide blade elevation for increased stability; Long-lasting V-ribbed belts; cast iron handwheels; Two access doors in cabinet; Powder-coated cabinet.

SAWSTOP ICS 53230-52 10" TABLE SAWSpecifications: -- 10" Blade cap., 5 HP motor, 3-1/8" depth of cut @ 0°, 2-1/4" depth of cut @ 45°, 13/16" max. dado width, 5/8" arbor diameter; blade tilt left. Features: -- Enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and SAWSTOPS's revolutionary flesh detecting safety mechanism.Includes: -- 52" T-Glide Rip Fence, side support table; 4" dust collection port; miter guide. -- Magnetic contactor motor control, main power switch with removable lock-out key.

SCHELLING FMH 430 Front Load Panel Saw169.2" (4,300 mm) Cutting length, 161" (4,100 mm) pull-back, 3.3" (85 mm) max. saw blade projection, 25 HP (19 kW) main saw motor & 2.5 HP (2 kW) scoring motor. -- Variable saw carriage travel speed from 0 - 262 FPM (80 MPM), return speed of 262 FPM (80 MPM), LED ammeter to show load of main saw motor during operation. -- Electronically controlled overhead program fence, rack & pinion driven on both sides, forward speed from 0 - 262 FPM (80 MPM), return speed of 262 FPM (80 MPM); (9) material gripper clamps open up to 3.1" (80 mm). -- SCHELLING "COMPOSER" Electronic control with color monitor (displays cutting dimensions and patterns w/moving graphics), self-diagnostic, data input by keyboard or possible direct downloading from office PC. -- 90-1/2" (2,300 mm) Long crosscut fence (front-to-back); (2) side/crosscut aligners for up to 87" (2,210 mm) crosscuts; split pressure beam, (1) in front & (1) behind. -- (3) Front mounted air float tables for moving panel from rip position to cross-cut position, 24" x 78" (610 x 1,981 mm) each, (2) in the crosscut section are movable. -- Rear of machine fully enclosed for safety with man-height sheet metal panels & wire screen windows. -- Main saw blade is 370mm, Scoring blades are 200mm. Actual model is FM 430 MCS-F.This machine came equipped with the following optional upgrades: -- Formatting stops (for cutting panels with plastic laminate hanging over the edge), Real time label printing (industrial printer included), Symmetrical Cutting, Window Cutting, Postform Scorer (edge scoring saw that aligns with the main saw blade to reduce chipping at the exit side of the main blade travel), Large miter gauge that mounts to the saw to facilitate making mitered cuts, & Laser light that shows the cutline for freehand manual cutting.

SCHELLING FM-H 330/330 Automatic Panel Saw 129.9" (3,200 mm) Cutting length, 3.3" (85 mm) max. saw blade projection.Specifications & Features: -- 11 kW (15 HP) main & 1.6 kW (2 HP) scoring motor. -- Variable saw carriage travel speed from 0 - 262 FPM (80 MPM), constant return of 262 FPM (80 MPM). -- Electronically controlled overhead program fence with grippers, rack & pinion driven on both sides, forward speed from 0 - 262 FPM (80 MPM), return speed of 262 FPM (80 MPM); (6) Clamps open up to 3.9" (100 mm). -- 1,500 mm Long crosscut fence (front-to-back), (2) side/crosscut aligners for up to 87" crosscuts, (1) in front & (1) behind pressure beam. -- SCHELLING "COMPOSER" operating system; on-board SCHELLING optimizer, color monitor (displays cutting dimensions & patterns w/moving graphics), self-diagnostic, data input by keyboard & mouse or direct downloading from office PC is possible. Complete with: -- (3) Front mounted air float tables for moving panel from rip position to crosscut position; fully enclosed for safety with man-height sheet metal panels & wire screen windows.Specifications subject to verification.

SCHELLING FH4-330/310 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 130" (3,330 mm) Rip Cutting cap. & 130" (3,300 mm) pull back; 4.1" (105 mm) saw blade projection; 3.5" (90 mm) Max book height; 24 HP (18 kW) - 3.800 RPM main motor, 3 HP (2.2 kW) - 5,500 RPM scoring motor. -- Saw Carriage: Variable saw carriage travel speed from 16 - 525 FPM (5 - 160 MPM), constant return of 525 FPM (160 MPM). -- Pusher Fence: Programmable overhead program fence, rack & pinion driven on both sides; forward speed from 0 - 262 FPM (0 - 80 MPM), constant return speed of 262 FPM (80 MPM).Pusher fence with (8) material gripper clamps with double clamping fingers, clamps open to 3.5" (90 mm).Operator & Machine Control:PC Front-end controller with SCHELLING "MCS" Evolution + "HPO" Optimizing System + "Windows XP" operating system.17" Color screen displays cutting dimensions & patterns with "REAL TIME" moving graphics, self-diagnostic, data input by keyboard or direct downloading from office PC. -- Complete with:90.5" (2,300 mm) Long crosscut fence (front-to-back), (2) side/crosscut aligners, (1) in front & (1) back of the cut-line, up to 87" (2,210 mm) cross-cutting cap.Electronic scorer adjustment, from the machine control, (3) Front-mounted air float tables with (1) central fan, 24" x 83" (600 x 2,100 mm) each, of which (2) are movable.Fully enclosed for safety with a man-height wire screen fence with access doors. -- Includes:Original Docs, Manuals, tools & tooling as pictured. -- Actual Model is SCHELLING FH4 330/310

SCHELLING FXH 430/410 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:169" (4,300 mm) Cutting length & 167" (4,250 mm) pull back; 3.9" (99 mm) max. saw blade projection, 23 HP (17 kW) main & 3.5 HP ((2.6 kW) scoring motor. -- Saw Carriage: Electronically controlled saw carriage with rack & pinion drive; variable travel speed 1 - 394 FPM (1 - 120 MPM), constant return of 394 FPM (120 MPM). -- Pusher Fence: Electronically controlled overhead pusher fence, rack & pinion driven on both sides; (9) Gripper clamps that open up to 3.5" (90 mm). -- Forward speed 0 - 262 FPM (0 - 80 MPM), return speed 262 (80 MPM) FPM; travel via brushless AC Servo Drive -- Operator & Machine Control:PC Front-end with Schelling "MCS" + Windows "NT" operating system.17" Color display with SVGA resolution (displays cutting dimensions & patterns w/moving graphics); virtually unlimited storage capacity, standard keyboard & mouse.Ethernet card; 128 MB Ram, 56K modem. Integrated graphical self-diagnostic, remote diagnostics by the factory is possible via dedicated phone line; data input by keyboard or possible direct downloading from office PC.SCHELLING "MCS" software displays simulation of patterns before actual cutting; graphical representations of cut-to-size parts in production shows the operator what to do in "real time". -- Complete with:2,300 mm Long crosscut fence (front-to-back), (2) automatic side/crosscut aligners for up to 87" (2,210 mm) crosscuts, (1) in front & (1) behind pressure beam cut line.(3) Front mounted air floatation tables, each table 24" x 83" (609 x 2,108 mm), rear of machine fully enclosed for safety with man-height safety fencing. -- Actual Model is SCHELLING FXH 430/410

SCHELLING FM-430/410 CNC Front Load Panel SawSpecifications & Features: 169" (4292 mm) Cutting length & 165.3" (4,200 mm) pull back, 3.75" (95 mm) max. saw blade projection; 25 HP (19 kW) 4,100 RPM main & 3.4 HP (2.5 kW) 5,600 RPM scoring motor. -- Equipped with: Variable saw carriage travel speed from 0 - 278.8 FPM (85 MPM), constant return of 278 FPM (85 MPM). -- Electronically controlled overhead program fence with rack & pinion driven on both sides; forward speed from 0 - 278 FPM (85 MPM), return speed of 278.8 FPM (85 MPM); equipped with (8) gripper clamps (open up to 5" (130 mm). -- Features: SCHELLING "COMPOSER" IBM-AT Compatible Computer Control; aftermarket color monitor (displays cutting dimensions and patterns w/moving graphics) , self-diagnostic, data input by keyboard; onboard optimization program. -- Complete with: 2-3/4" to 87" (2,200 mm) Long side/cross-cut aligning zone, (1) aligner in front & (1) behind the cut line. -- (3) Front mounted air float tables for moving panel from rip section to the cross-cut section, (2) movable and (1) fixed; each with their own blower. -- Rear of machine fully enclosed for safety with man-height sheet metal panels & wire screen windows. T

SCHELLING - FXH 430, ...Automatic Front Load Panel SawSpecifications: -- 169" Cutting length, 3" cutting height; 3.7" (95 mm) max. saw blade projection, 20 HP (15 kW) main & 3.5 HP (2.6 kW) scoring motor. -- Variable saw carriage travel speed from 0 - 394 FPM (0 -120 MPM) via brushless AC Servo Drive; constant return of 394 FPM (120 MPM). -- Equipped with: -- Electronically controlled overhead program fence, rack & pinion driven on both sides; forward speed from 0 - 262 FPM (0 - 80 MPM) via brushless AC Servo Drive, return speed of 262 FPM (80 MPM); (8) material gripper clamps (open up to 3.5"/ 90 mm). -- Flat guideways on the feeder and saw carriage that has a "Lifetime Guarantee". Features: -- SIEMENS "Fijitsu" IBM-compatible PC with INTEL Celeron 1.2 GHz processor, 30 GB hard drive, 256 MB RAM, floppy drive, CD ROM drive, modem, network card, (2) USB ports, and open expansion slots (all components non-proprietary). -- SIEMENS "Fijitsu" 17-inch monitor; Windows NT based "MCS" saw control software; data input by keyboard or direct downloading from office PC is possible; optimization of programs at Saw. Complete with: -- 90-1/2" (2,300 mm) Long crosscut fence (front-to-back); (2) automatic side/crosscut aligners for up to 87" (2,209 mm) crosscuts; (1) aligner in front & (1) aligner behind pressure beam; (3) front mounted air floatation tables, 24" x 82" (609 x 2,083 mm); (2) tables in rip section are movable. -- Includes: -- Roller support rails rear of machine; rear of machine fully enclosed for safety with man height wire screen fencing.

--In Auction--Starting bid: $100-- Schuetz Tool Bladder Press Specifications: (2) Shuttle tables, approx. 55” x 106” press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200°F. Can use PVA which would extend cycle time to approx. 15 > 45 minutes depending on the actual glue mix used to achieve 80%+ cure strength. Includes Hydraulic Pump. SPECIAL NOTE: Fully operational, however, need 4 or 5 heating rods replaced, new rod parts are included for you to install ( don't have the capability to remove them). The current average operational temperature is 150° F. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Schuetz Tool Bladder Press Specifications: (2) Shuttle tables, approx. 55” x 106” press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200°F. Can use PVA which would extend cycle time to approx. 15 > 45 minutes depending on the actual glue mix used to achieve 80%+ cure strength. Includes Hydraulic Pump. SPECIAL NOTE: Fully operational, however, need 4 or 5 heating rods replaced, new rod parts are included for you to install ( don't have the capability to remove them). The current average operational temperature is 150° F. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SCM OLIMPIC K 360TE COMPACT EDGEBANDER WITH PRE-MILLING:Specifications: -- Edge Capacity, 0.4 to 6 mm (0.016to 1/4") for strip feeding. -- Panel Capacity, min. width 65 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-1/2").Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator, pneumatic in/out positioning. -- Pre-Milling Station, RT-VP: Spindles 2 x 2.0 HP, 19,000 RPM, (1) with PLC controlled jump action and diamond cutter heads. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Manual digital positioning, (3) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station: Front & rear 2 x 0.25 HP, 12,000 RPM motors mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Trimming Unit Flush/Bevel/Radius: Top/Bottom remote (via control panel) pneumatic positioning for (3) settings, flush/bevel/radius trimming, 2 x 0.7 HP - 12.000 RPM motors with precision digital indicators for quick setup. -- Profile Scraping Unit "RAS/V": Top/Bottom, manual pre-set up with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°. Controls: -- Orion 1 Plus Controller, fixed at in-feed of machine. with "Touch Screen" control with soft keys, graphics and LCD display panel. It handles most machine set-up functions and workstations. Complete With & Features: -- Feed-speed, 36 FPM fixed, 1 x 2.0 HP feed drive motor; 200 Hz frequency inverter for all trimming units. -- Manual adjustable hold-down pressure beam, full sound enclosure cover and outboard panel support.

SCM SIGMA 107 IMPACT FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:149.6" (3,800 mm) Max. rip cut cap., 4.2" (107 mm) saw blade projection using a 380 mm dia. blade,12 HP (9 kW) main saw motor, 4,400 RPM main blade speed, 2 HP (1.5 kW) scoring motor, 7,650 RPM score blade speed. -- Saw Carriage:Variable saw carriage speed from 20 - 98 FPM (6 - 30 MPM), return speed of 98 FPM (30 MPM);Automatic saw carriage lubrication, balanced on hardened cylindrical guides, external score saw adjustment, THK guides for vertical saw movement. -- Pusher Fence:Programmable rear fence with rack & pinion movement, 124 FPM (38 MPM) forward speed, 124 FPM (38 MPM) return speed;(8) Material gripper clamps, grippers fit into a slotted pressure beam for positive material control during the final cut. -- Operator & Machine Control:PC Front-end with SCM "WinCUT" real-time operation software with onboard optimizer; 64 MB RAM, 15" color super VGA monitor, on-screen diagnostics & production reports.(2) Serial ports & (1) parallel port, spacing available for networking cards. -- Complete with:Rear support rails with rollers; (1) front Bakelite-coated air table 79" x 20" (2,007 x 508 mm) & (2) Bakelite-coated air tables 59" x 20" (1,499 x 508 mm).Automatic crosscut side aligner out to 72.7" (1,848 mm), plastic safety sectors & emergency bar surround cutting area, service kit & manuals, triple dust collector outlet. -- Actual Model is SCM SIGMA 107 IMPACT.

Tubeless Vaccum (TNV) Electro-Spindle with HSK63F quick release Toolholder Rotation speed 600-2400 rpm Air Cooling by rear electrofan Static Inverter Centralized dust collection system with automatic blast gates

SCM SANDYA 10/S M2 2-Head Wide Belt SanderHead Configuration1st Head: 7" Diameter Spirally-grooved steel contact roll, 20 HP Motor.2nd Head: Combination head, 7" Diameter Spirally-grooved rubber-coated contact roll, Finishing platen with Electronic sectional pad with EPICS System, 3-1/2" Steel contact roll, 13 kW (17-1/2 HP) Motor.Specifications: -- 4.5 - 9 m/min (15 - 30 FPM) Variable feed speeds, -- Part thickness 4 mm (0.2") to 170 mm (6.7"). -- 43" W x 103" L Abrasive belt, Electronic sanding belt tracking & Pneumatic belt tensioning. -- 34" H Natural rubber feed belt,Equipped with & Features -- Automatic thickness adjustment, Automatic feed belt tracking & Tensioning, -- Motorized rise & fall of working table, -- Part thickness & Conveyor belt speed LED readout, -- Infeed safety bar for operator protection and oversized parts. -- 3" Diameter Entry & exit rolls, 13" L 2-Roll Infeed & Outfeed extensions with 2" Diameter Rollers & Manifold. -- Unopened box of (10) KP520 100 Grit Belts (Purchased for $500).Dimensions: 88" L x 86" W x 90" H.Weight: 4,440 Lbs.

SCM - OLIMPIC K 201 HFA, ...Automatic Compact Edgebander with: 3 mm Max. coiled edgebanding thickness & High Frequency motorsSpecifications: -- Edgebanding thickness cap. (for both coil & strip): 0.4 - 3 mm (0.02" - 0.19"). -- Min. panel length for coiled edges (min. width 200 mm) 140 mm (5.51"). -- Min. panel width for coiled edges: 65 mm (2.56"). -- Panel thickness: 8 - 40 mm (0.31" - 1.57"). -- Feed speed:9 MPM (29 FPM).Equipped with: -- Automatic adjustment of all units when panel thickness is changed. -- 20" Dia. coil table. -- Automatic coil feed magazine; manual strip feed. -- Teflon-coated glue pot. -- 1.2 mm (0.05") Cap. guillotine. -- Eye-level control with: GEFRAN "1000" LED Temperature controller. -- Adjustable feet.Workstations: -- Single-motor end trimming unit with: (1) 0.19 kW (1/4 HP) - 12,000 RPM High-frequency motor & copying device. -- Top & bottom flush trimming unit with: (2) 0.35 kW (1/2 HP) - 12,000 RPM high-frequency motors, and front & vertical copying devices.