Woodworking Equipment For Sale

CEFLA ROCTRE D Automatic Spray Finishing Machine for HIGH VOLUME PRODUCTION and includes (2) two integrated cleaning trolleysThickness: Max. 50 mm (2"); Min. 5 mm (0.2").Maximum Line speed: 20 MPM (65 FMP).Equipment Specifications:CEFLA, model ROC 3 D. Is a Two-arm reciprocating Spray Machine: -- Parts are fed under the Part Reading Bar to measure size and spray parameters on a continuous CFB belt conveying system. -- Lacquer recovery and belt cleaning are accomplished by means of a "cleaning trolley" located under the existing end feed belt. Made up of counter-rotating rollers with scraper and belt cleaning unit, with (3) rollers and stainless-steel troughs: all the rollers are fitted on the motorized trolley longitudinally removable by hand pulling of trolley out. -- Powered outfeed tilt-able belt lifts to approach the cleaning trolley. -- (2) Oscillating arms equipped to accept a maximum of (8) guns, four per arm, and driven by a Brushless servo motor.There are (2) Separate lacquer feeding circuits with recycling system. -- This is a fully pressurized spray cabin with an exhaust air filtering system for overspray using a double dry filter set, primary filter, and secondary. -- Electronic control cabinet to monitor spraying functions.The booth consists of sandwich paneling, and air is pushed in through (2) air intake ducts (positioned between guns) above the slanted perforated top panels made of fine filter material, which help to reduce turbulence. Parts running through the sprayer can be viewed by means of a large front viewing window/access panel, which can be lifted to access the guns and interior of the sprayer. Photos show equipment while it was still in service - currently being reconditioned.Note: EX-FACTORY’s Logistics Department is experienced and set up to provide “Full Service Logistics"; from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door).

CEFLA - EASY 2000 D: Finish SystemCEFLA - Easy 2000: Reciprocating Spray Machine. 2-Arm dry filter Reciprocating Spray Machine with: (3) Independent paint circuits; allows several different coatings to all applied using the same machine with reasonably quick-change over. Parts are electronically scanned as they enter the spray cabin: To lower waste & increase spraying efficiency.Spray guns are: All electronically controlled at the "Easy lCD" interface panel.Spray Cabin. Setup with the CEFLA Recovery System. Means: No paper belt to change maintaining a "Clean" feed belt. The positively pressurized cabin helps both: Control dust & direct overspray down into the dry paper filters. Machine: Completely reconditioned with many new parts including: All belts. Air & Fluid lines. Pumps for the cleaning trolley. Filters. Wear parts.

The CEFLA Belt Handling Type TNS 4500/A is an industrial vacuum belt conveyor designed to transport, stabilize and accurately position wood panels and furniture components throughout automated finishing lines. The machine utilizes a perforated conveyor belt combined with an integrated vacuum chamber and centrifugal blower to generate continuous negative pressure, securely holding workpieces against the belt during transport. This vacuum retention system prevents movement, vibration and misalignment while components pass through sanding, painting, drying and curing operations, ensuring consistent product positioning and superior finishing quality. The conveyor operates in synchronization with adjacent production equipment through PLC control, improving production flow, minimizing manual handling and increasing the overall efficiency, reliability and safety of industrial woodfinishing operations.Machine Type: Vacuum Belt Conveyor (Belt Conveyor with Suction)• Model: TNS 4500/A• Manufacturer: Cefla Finishing• Machine Function: Automatic conveying and positioning of workpieces through finishing lines• Conveyor Type: Continuous vacuum belt conveyor• Conveyor Length: 4,500 mm• Maximum Working Width: Up to 1,300 mm• Conveyor Belt: Wear-resistant perforated conveyor belt• Vacuum Holding System: Integrated suction chamber beneath the conveyor belt• Vacuum Generation: Integrated centrifugal blower for negative pressure generation• Suction System: Continuous vacuum retention for workpiece stabilization during transport• Drive System: Geared electric motor with variable frequency drive (VFD)• Conveyor Speed: Variable, electronically synchronized with production line equipment• Control System: PLC integrated with upstream and downstream finishing equipment (NOT INCLUDED IF PURCHASED SEPARATE OF THE LINE)• Workpiece Detection: Photoelectric sensors for automatic panel detection• Machine Frame: Heavy-duty welded steel construction• Adjustable Leveling Feet• Electrical Supply: 400–480 V, 3 Phase, 50/60 Hz• Approximate Dimensions: 4.50 × 1.60 × 0.95 m• Approximate Weight: 900–1,100 kg

VERY LOW HOUR MACHINE; power on 760 hours, running 554 hoursThe CEFLA MITO 2P is an automatic industrial spraying machine used to uniformly apply paints, sealers, stains, and coatings to wood panels, doors, and components in industrial manufacturing processes. -- The machine uses two oscillating arms with automatic spray guns and a photoelectric scanning system that detects each workpiece's dimensions and position to optimize application and minimize waste. Its continuous conveyor system and electronic controls ensure consistent finish quality, high productivity, and production repeatability. -- Additionally, it incorporates filtration and overspray extraction systems that enhance process efficiency and contribute to achieving high-quality surface finishes on components destined for the subsequent assembly and finishing of furniture and wood structuresMachine type: Oscillating automatic spray painting machine• Model: CEFLA MITO 2P• Manufacturer: Cefla Finishing• Application type: Water-based paints, solvent-based paints, and industrial adhesives• Spraying system: 2 automatic oscillating arms (2P)• Typical configuration: 2 arms with 4 guns per arm• Total number of guns: Up to 8 automatic guns• Effective working width: 1300 mm• Maximum workpiece thickness: 60 – 80 mm• Minimum workpiece length: 250 mm• Variable feed speed: 1 – 6 m/Min• Maximum oscillating arm speed: Up to 140 m/Min• Maximum oscillation frequency: 55 cycles/Min• High-precision photoelectric barrier scanning system• Automatic spray optimization system• Paper conveyor belt with vacuum system• Patented Airsphere Plenum system for airflow control• Overspray filtration via dual-stage dry filters• Automatic color and product change system• 12.1"; color touchscreen• Industrial PLC control• Ethernet and USB connectivity• Installed power: 15.5 kW• Compressed air consumption: 5 Nl/min• Extraction airflow: 10,000 m³/h• Power supply: 480V three-phase• Approximate dimensions: 3.66 × 3.78 × 2.40 m• Approximate weight: 2,270 kg

CEFLA/FALCONI KLEENSPRAY 12 Reciprocating Spray System; -- The "Kleenspray 12" Reciprocating Automatic Spraying system is mainly based on the use of a closed continuous CFB belt conveying the panels to & through the spray area. The design features many advanced mechanical solutions that provide significant advantages. --Technical Features: -- Fully pressurized spray cabin, "Paper Belt Overspray Capturing" lacquer system; microprocessor unit for spraying operation control. -- 5-Edge coating, 51" max. width, 76" long spray enclosure. -- Gun Carrier: Reciprocating-type linear Gun Carrier with (4) guns; includes (1) station with "(4) guns, stainless steel material handling pumps", clamps & brackets for free height and angle settings. -- Supporting trolleys driven by toothed timing belts with brushless motor with electronic control, reciprocating slider, automatic reversal of gun angle on each stroke to cover panel edges, with variable speed; (3) lacquer feeding circuits. -- Light barrier gun control: Photo cell sensors send material size to the programmable controller, which opens and closes the guns. -- Conveyor System: "Paper Roll" continuous collection belt with roll-up collection paper area, with long-life and easily removable infeed roller section, with electronic reading barrier consisting of (60) photo diodes and outfeed roller. -- Booth Enclosure: Made of sandwich paneling with glazed elements; port for access to the spray gun units. -- The machine is particularly suitable for solvent-based and/or waterborne drying lacquers.

CEHISA PRO-12 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Features: Pre-Milling Station with:2 x 1.5 Kw (2.0 HP) 12,000 RPM motors, standard equipped with diamond cutters. Both spindles pneumatically controlled. -- Spray agent unit for top and bottom with (2) sprayer and (2) reservoir -- Automatic Edge Magazine: For coiled material up to 3 mm thickness, strip feed magazine for up to 5 mm (3/16") solid wood banding. -- Quick Melt Glue System, MR-5:10 - 15 min. heat-up time, auto temperature drop. Glue Tank is coated with nonstick material, quick-change mechanism for easy maintenance and/or color change. -- Pressure Section:(1) Large dia. driven and (2) idle rollers. Digital read-out and pneumatic positioning selectable from controller touch screen.Edgebanding Workstations: -- End Trimming Station, V-7: Double motor front & rear, 2 x 0.35 Kw (0.5 HP) - 12,000 RPM. -- Edge Trimming Station, BC-5: Top & bottom flush/bevel/radius trimming, 2 x 0.55 Kw (0.75 HP) - 12,000 RPM, tiltable 0° - 10°, pneumatic exclusion from operator panel. -- Corner Rounding Unit, FD-50: To process overhanging edges and trimming around the leading & trailing edge, 1 x 0.27 Kw (0.36 HP). -- Profile Scraping Unit, R-8: For thick PVC/ABS radius scraping, pneumatic in/out positioning from control panel with chip collection box. -- Flat Glue Scraper, RR-7: To remove potential glue squeeze-out. -- Buffing Unit, PC-9: with spry mist unit top/bottom Top/Bottom, 2 x 0.12 Kw (1/8 HP) - 1,650 RPM motors, tilting horizontally and vertically. -- Operator Interface:PLC Microprocessor control with color touch screen, memory up to 20 programs.Equipped With:Feed Speed, 9 - 14 MPM (29' to 45 FPM), -- Power hold-down beam, work-piece support outrigger, safety & sound enclosure. Included Options:Riepe, non-stick spray system. -- Nesting Tracer Shoes for top/bottom trimmers

Cemco SVB 120 Boring Machine 113" x 22" Boring area (14) 1.5 HP 1800 RPM motors driving (14) spindles 121" x 30.5" Table size (4) Spring loaded hold downs

CEMCO 3 Head Industrial Sander. Running when removed from location.

- Width capacity 53”. Drum, Drum, Combination Head (see sander specs - Head 1: Rubber covered contact roll, 10” dia, 65 shore adjustable with dial - Head 2: Rubber covered contact roll, 10” dia, 65 shore adjustable w/dial - Head 3: Combination head, (2) 5-1/2” finishing drums w/platen - 440 V, 60 cy, 3 Phase - Year 2000, Good Condition - Warehoused after plant shut down factory in 2013 - Have manuals /spec sheets - Machine weighs app 6000#’s. - Buyer must pay for riggers to load onto truck. (our forklifts can’t pick it up)

Cemco 2000 Wide Belt Fair/good condition. It starts and runs until we unplugged it 12 years ago Belt size 37 x 75 2004 Single head 1- 5” roller top, 2 - 5” rollers bottom, 1 rubber covered, 1 steel. No platen Thickness ¼” – 6” 2179 hours on machine 230 V, 60 CY, 3 PH Variable speed feed 20 HP motor Emergency Brake

CEMCO - UF-37-1-103: Single Head Wide Belt SanderSingle head Wide Belt Sander with: 36" Wide capacity; combination head with 6-1/8" diameter contact roll & independently adjustable platen. Equipped with: -- 30 HP Main motor; 1 HP variable speed conveyor feed: 30 to 50 FPM; 1.5 HP power raising & lowering Conveyor bed motor with: Handwheel fine adjustment. -- 37" x 103" Abrasive belt size. -- Electric eye tracking. -- Single infeed & outfeed holddown rolls; antikickback finger devise on the infeed of the Sander. -- Includes: Load meter; disc brake on sanding head; magnetic controls.Recently replaced: Conveyor belt; contact sanding roll; bearings.OVER BUILT for heavy loads. Great Sander for SLAB material.No longer required for ongoing operations.

CEMCO 2000 Wide Belt Drum Sander, Single Head. --Specifications: Lightly used. Only 2180 Hours. -- Belt Size is 37" X 75"; 20 HP main motor,.1.5" top roller plus 2- 5" bottom rollers. One steel 1 rubber covered. -- Thickness is from 0" - 6". No Platen. Variable speed feed. Emergency brake. good. 4-1/2" dust port. -- Note: This machine was replaced 12 years ago with a triple head Cemco. Stored in a dry warehouse since then. Ran well until we unplugged it. All Cemco equipment is of commercial quality. This sander is a workhorse.

CEMCO - 1237: Dual Head Wide Belt Sander 2-Head; 36" cap. -- 1st Head. Rubber-covered contact roll; 20 HP motor.2nd Head. Finishing platen; 15HP motor; 37" x 75" abrasive belts with air tensioning. -- Variable speed conveyor feed; 15 - 60 FPM; 0" - 6" thickness cap.; infeed & outfeed rubber-covered pinch rollers. -- Equipped with: Motor load meters; infeed conveyor extension; air disc brakes on sanding heads; emergency operator stop bar; dust hoods.Actual model: 1237-SESeller recently upgrades to a 3-Head 52" wide Sander; this one is no longer required.

Cemco Model 2243-S Planer Sander(double sided)

Comec Model MMS-2000 Twenty (20) Spindle Horizontal Slot MortiserSpecifications -- Spindle Speeds 4,500 and 9,000 RPM/Min. -- Single Oscillating carriage with dovetail profile, 2,000 mm (78.75") length -- Oscillation motor, 3 PH -- Min./Max. spindle center-to-center distance: 55/1,945 mm (2.16" - 76.57"). -- Five (5) motors for spindles power 4.0/3 HP, with two speeds. -- Advancement of the spindles on guides with balls recirculation with pneumatic cylinder and hydraulic brakeEquipped with & Features -- Adjustable table 8" Wide X 87" Long -- Locking cylinders and Four (4) Pneumatic Holddown ClampsNote from the seller -- Production 300 - 400 pieces per hour

2003 CENTAURO TA-F-EC AUTOMATIC HYDRAULIC COPY

2004 CENTAURO TA-F-2000 AUTOMATIC HYDRAULIC COPY LATHE

2004 CENTAURO TA-F-2000 AUTOMATIC HYDRAULIC COPY LATHE

CENTAURO T5-1600 Hydraulic Copy Lathe with (2) top plunging knives; Specifications: -- 63" (1,600 mm) Max. between centers, 4/5.5 HP main motor, two speed selector switch, 900 - 1,500 - 1,800 - 2,250 - 3,000 and 4,500 RPM spindle speeds. -- 1 HP Hydraulic power pack for variable speed carriage 0 - 19 FPM carriage; return speed 24 FPM, hydraulic tailstock with Pressure Reducing Valve (PRV) for fine control of pressure, especially helpful for small and/or slender turnings. Equipped with: -- (2) Independent copying units, (1) for roughing and (1) for finish cutting. 1st, 2nd pass & auto feature with 2nd pass active it will cut the pattern 2 times automatically and sequence the tools between cuts. -- Revolving steady rest, max. dia. 140/100 mm square ( 5.5"/3.9"), and for max. dia. 90/65 mm max. square billet size. -- 9.8" (250mm) Max copy dia., 6.8" (175 mm) Max. square section without steady rest.. Includes: -- (2) rear-top plunging slides manually operated with knives for making dowel ends; 45/26 mm drive center for headstock and 12 mm center for tailstock, (2) V-type gouges with 0.6 & 3.5 mm cut radii.Optional: Centauro AG-125 Knife Sharpener available at exra cost.NOTE: Ex-Factory handles import/export to just about any country in the world.

CENTAURO TC-1200 Copy Lathe;47-1/4" Max. between centers. -- 4-3/4" Height of centers over bed. -- Max. copy dia. 6" (4-1/8"). -- Max. dia. permitted by traveling steady 3-1/2" (2-1/2"). -- 4 HP main motor, 900 - 1,500 - 2,200 & 3,540 RPM spindle speeds. -- 1 HP hydraulic variable speed carriage with tool post and revolving steady rest. -- (2) Independent gouges working in conjunction with the traveling steady rest. -- Variable speed hydraulic saddle movement. Standard Equipment & Specs: -- Drive center with (2) interchangeable heads 1" and 1-3/4". -- Tailstock revolving center 1/2". -- Traveling steady rest max. 3-1/2" (square 2-1/2" x 2-1/2") with reduction bushing. -- (2) Vertical Tantung gouges, radius 1.2 mm and (1) precutting tool. -- Work-piece centering device. -- Tool support rest for hand turning. -- (2) Dust extraction ports 4" dia. -- Motor protection switch. -- Emergency push button. -- Front sliding safety guard. -- Standard: Service tool kit and Abrasive stone for cutting edge dressing.