Woodworking Equipment For Sale

KREG DK 3100 Pocket Hole Boring MachineElectric 3-spindle Pocket Drill; 1.5 HP direct drive electric motor; 39-1/2" table/ top working height; (0.5 - 1) Sec cycle time. -- Drills (2) pocket holes in (1) machining cycle across rails of varying widths with 3/8" dia. step bit in (1) smooth operation.... Drill spindles in the machine are fixed at 3/4" - 1" and 1-3/4" on center allowing it to handle most common rail widths of 1-1/2" up to 3-3/4" with ease. -- One of the (3) Spindles is with left-handed, simply remove one bit from the spindle not being used to set the desired 2-hole spacing. -- The bits are supported all the way to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent placement in virtually any material. -- Features: 15° Boring angle for greater stability, reduced screw breakout & splitting. This produces a smaller "flat-bottom" pocket hole with rounded sides that can be plugged with a dowel if desired. -- Includes: Pressure gauge & cycle counter, fence, holddown & clamping assembly, (2) 3/8" cobalt drill bits, and foot pedal control.

KREG DK 5100 5-Spindle Pneumatic Pocket Hole Machine. -- Individually actuated motors, (5) 0.75 HP motors, mounted on 6" centers. -- Hardened steel drill guides to support drill bit through the operation; 1-touch, foot pedal cycle. -- Swings stops for optimized material positioning; dust collection chutes for efficient chip removal. -- Complete with pre-filter and automatic lubricator.

Set of (4) four KREMLIN AIRMIX paint pumps mounted on a stand and (8) eight KREMLIN Spray guns including spare parts pictured.

KUFO SK-12RS Straight Line Rip Saw w/Return Conveyor;Entry level Straight-Line Rip Saw with a guaranteed 6' glue line. -- Powered by a 15 HP direct drive motor. -- 12" Dia. Blade capacity for up to 3-1/4" max. cutting height, 4,200 RPM blade speed. -- Equipped with (6) holddowns and a Wye-Delta soft start for lower amp requirements during start-up. -- 1 HP Feed motor, 36 - 145 FPM feed speed, 6" chain width and automatic chain lubrication. -- Treated chain links, pins and raceways withstand heavy use because of an automatic oiler. -- Large 15-3/4" rip capacity. -- Overarm control box mounted on the in-feed side. -- Total space requirements are about the same as a standard size tablesaw. -- Complete with side mounted return conveyor.

Single belt oscillating "Tiltable Bed" 0° - 90° sander, 3 HP main motor, 3,400 RPM, belt size 6" x 89", 30.5" long platen. -- Max sanding length 30.5", 4" vertical adjustment of front table, 36" table height, oscillating rate of 121 times/min. -- Includes: (4) interchangable spindles, sizes are 1.25" - 1.5" - 2" & 2.5" dia.

Kuka KR60-3 Robot System KR C4 Control System Kuka Programming Smart Pad Robot Enclosure (3) Heavy duty conveyor racks

KUNDIG DUPLEX 53-RC-E Wide Belt Sander (2) Heads; 52" Width cap. Drum, Combination Head.Head Configuration1st Head: 7-1/4" Dia. rubber covered contact roll, 25 HP motor.2nd Head: Combination head with rubber covered contact roll and segmented finishing platen, infeed sensors sense the panel and electronically control the platen height with timers, variable edge control can also be set, 20 HP motor.Specifications: Abrasive belt size 54" x 75" with air tensioning and electronic abrasive belt tracking, both heads with abrasive grit thickness adjustment, 2 HP Variable feed drive. -- Conveyor belt speeds 9 - 45 FPM, controlled by electronic inverter & adjustable on the control panel; infeed & outfeed rubber covered holddown rollers.Equipped with & Features: -- Workpiece thickness cap. 1/8" - 6-1/4", motorized thickness adjustment with LED readout. -- A joystick controls the conveyor opening and start/stop of the feed, automatic "over-thickness" protection and automatic conveyor belt tracking. -- Constant passline of conveyor height at 35". -- Air blow off of second head abrasive belt. -- Emergency stop button, motor load meters, magnetic controls.NOTE from the seller: There is a small leak in the air bladder . The sander has 6,541 working hours

KUNDIG OPTIQ 2-43 DUAL HEAD WIDE BELT SANDER2-Head, 43" width cap. - 1st Head: steel contact roll, 6-1/4" Dia., 25 HP motor. -- 2nd Head: Combination head with 6-1/4" dia. rubber covered contact roll 50-Shore) and 3-1/8" wide finishing platen, 15 HP motor. -- Abrasive belt size 43" x 75", with air tensioning & electronic abrasive belt tracking, conveyor belt feed with 1 HP variable feed drive, 9 - 45 FPM feed speed with inverter, infeed & outfeed rubber covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening, LED readout of thickness, part "over-thickness" protection, automatic conveyor belt tracking. -- Features: Emergency stop button, motor load meters, magnetic controls.

KUNDIG - 2-43: 2-Head Wide Belt Sander43" Width cap.; Drum; Combination Head.Head Configuration1st Head. Spiral rubber-covered contact roll; 6-1/4" dia. (80-Shore); 25 HP motor.2nd Head. Combination head with: 6-1/4" Dia. rubber-covered contact roll (50-Shore); 3-1/8" wide "air inflatable/cushioned" finishing platen; 20 HP motor.Specifications -- Abrasive belt size 43" x 75" with: Air tensioning & electronic abrasive belt tracking. -- Conveyor belt feed with: 1 HP Variable feed drive; 9 - 45 FPM feed speed with an inverter. -- Infeed & outfeed rubber-covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening.Equipped with & Features -- LED Readout of thickness; part "over thickness" protection. -- Automatic conveyor belt tracking. -- Emergency stop button; motor load meters; magnetic controls.

KUNDIG - 2-43: 2-Head Wide Belt Sander43" Width cap. Drum, Combination Head.Head Configuration 1st Head. Spiral rubber covered contact roll, 6-1/4" dia. (80-Shore),2nd Head. Combination head: 6-1/4" Dia. rubber-covered contact roll (50-Shore; 3-1/8" wide "air inflatable/cushioned" finishing platen. Specifications -- Abrasive belt size: 43" x 75"; with air tensioning & electronic abrasive belt tracking. -- Conveyor belt feed: 1 HP Variable feed drive; 9 - 45 FPM feed speed with an inverter. -- Infeed & outfeed rubber-covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening.Equipped with & Features -- LED Readout: Thickness;, part "over-thickness" protection. -- Automatic conveyor belt tracking. -- Emergency stop button; motor load meters; magnetic controls. -- CONSTANT PASS LINENOTE from Seller: Low hours! Completely & professionally cleaned upon taking out of service. Runs great. Condition: EXCELLENT!

LA NUOVA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,Specifications: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads was patented and requires no maintenance. -- Includes: Lot of tooling. Table for flat/horizontal copying.Note: Machine completely gone over and all heads rebuilt in 2011 and used sparingly since.Actual model is 201-16.

LA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,Specifications: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads was patented and requires no maintenance. -- Includes: Table for Flat Work (2,000 mm); Rotary Device (1400mm); Automatic Chucking;Pneumatic; Clamping of Motor Carrier Shaft; (6) Sets of carving Bits with stylusActual model is 201-16.

LACEY-HARMER E-LINE Self-contained Visible Diode Laser End ShooterEconomical self-contained Visible Diode Laser; optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- Specifications: 100 Millampere operating current, -20° - +40° C operating temperature, 90 V for 250 nano-Sec mechanical stock. Beam angle with 5 mW - 15 mW output, 636 nm wave length. -- Options: 36" Long Diode Array Stand adjustable up to 90° from mounting surface, lines move easily and parallel to each other, micro-adjustment to make lines parallel, no tools needed -- Projects a line from approx. 12' to 15' depending on area lighting -- Consisting of two parts; (1) crossbar style mounting bracket, please add...$ 143; (2) axis slide brackets for easy positioning, add...$ 125 each or alteratively a simple universal stationary mounting bracket add...$ 30.

Hot Air Edgebander for Preglued banding 0.4 - 1.5 mm thickness Automatic cutoff for up to 1/32" Coil feed with manual feed for strips Panel thickness 10-50mm Front and rear end trim Top/bottom trim

LAGUNA SMART SHOP 2 PRO CNC Router, 5' X 10' with ATC & 82 Hours Only! (Purchased & Delivered in March 2024):60" x 120" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table with T-slot table including manual controls. -- Specifications: Machine travel 61" x 121" x 9.5" axis travel with 12" clearance under the gantry, Speeds of 900 IPM rapid travel with 600 IPM max. cutting speed. -- Equipped with:(1) 9.6 kW (12.87 HP) Electrospindle ISO-30 (ATC), 5,000 - 24,000 RPM Range, Ceramic Spindle Bearings supported by Automatic Tool Changer with (8) tool position tool rack; Includes assorted ISO-30 tool holders, collets, and precision collet nuts. -- All axesRide on 25 mm heavy-duty HiWin HG Series linear bearings and rails on all axis rack. "Helical" rack-and-pinion drives on "X" and "Y" axis, and precision-ground ball screw drive on "Z" axis. Gantry is driven on each end (two "helical" rack-and-pinion drives on "Y" axis). -- Control:SYNTEC TECHNOLOGY controller and drive components for easy diagnosis and exceptional reliability. Machine features the networking, connectivity and online troubleshooting typically found in Windows environments without the Windows baggage. -- Runs industry standard G-CodeThat can be created from any CAM software package. Program transfer to the controller can be accomplished with USB, or via Ethernet transfer. -- Complete with:Expandable control system for custom applications, Spindle speed control through programming, Manual overrides of spindle speed and feed speeds during run. -- Centralized lubrication system for all axis. -- (2) 7.5 kW (10.06 HP) Vacuum Pump blowers with Vacuum monitoring gauge, assorted tool holders. -- LAGUNA "CFLUX:3" 3 HP Cyclone Dust Collector.

LAGUNA - SMART SHOP II 510 - 5' x10' CNC Router with ATC: -- Specifications60" x 120" Moving gantry; fixed table design in a front-to-back configuration with: 6-Zone vacuum table including manual controls. -- 12" Z-Axis Stroke; 9-1/2" Z-axis clearance under the gantry; speeds: 900 IPM rapid travel with 600 IPM max. cutting speed. -- Equipped with:(1) 12 HP HSD Electrospindle ISO-30 (ATC); 6,000 - 24,000 RPM range; ceramic spindle bearings supported by: Automatic Tool Changer with 8-tool position tool rack. -- All axes ride on 25 mm Heavy-Duty HiWin HG Series; linear bearings & rails on all axes' rack; Helical rack & pinion drives on: "X" & "Y" axis; precision ground ball screw drive: On "Z" axis. -- Gantry: Driven on each end; (2) "helical" rack & pinion drives on "Y" axis. -- Controller & Software"SYNTEC" Control System matched controller & drive components for easy diagnosis and exceptional reliability. -- Runs Industry Standard G-Code: Can be created from any CAM software package; program transfer to the controller can be accomplished with USB or via Ethernet transfer. -- Expandable control system for: Custom applications; spindle speed control through programming; manual overrides of spindle speed, feed speeds during run; centralized lubrication system for all axes. -- Complete with: --(1) 2022 10 HP BECKER Vacuum Pump. -- Options Include:(1) Laguna Tflux-10 3-Phase, 10 HP, Cyclone Industrial Dust Collector, as pictured. -- Box of misc. items as pictured.

LAGUNA SMART SHOP MT Elite 5' X 10' CNC Router w/ ATC:60" x 120" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table with manual controls. -- Specifications: Machine travel 61" x 121" x 12" axis clearance under the gantry, Speeds of 2,000 IPM rapid travel with 1,800 IPM max. cutting speed. -- Equipped with:(1) 12 HP HSD Electrospindle, 6,000 - 24,000 RPM Range, Ceramic Spindle Bearings.(1) 8-Position Automatic Tool Changer Rack.Includes assorted tool holders, collets, collet nuts & tools. -- All axesRide on 25 mm heavy-duty HiWin HG Series linear bearings and rails on all axis rack. "Helical" rack-and-pinion drives on "X" and "Y" axis, and precision-ground ball screw drive on "Z" axis.Gantry is driven on each end (two "helical" rack-and-pinion drives on "Y" axis). -- Control:FANUC Industrial Control, a state-of-the-art control system designed for precision machining applications. With its advanced features and intuitive interface, the control provides unmatched accuracy, speed, and flexibility for a wide range of machining operations.Runs industry standard G-Code that can be created from any CAM software package. Program transfer to the controller can be accomplished with USB, or via Ethernet transfer. -- Complete with:Expandable control system for custom applications, Spindle speed control through programming, Manual overrides of spindle speed and feed speeds during run.Tool Touch-Off Probe, Centralized lubrication system for all axes. (2) Vacuum Pump blowers with Vacuum monitoring gauge, assorted tool holders.

Equipment located in O’Fallon, MO. 2021 Laguna Smartshop 2 SUV-510 CNC Router, 5x10 Cutting Area, Syntec Computer, Laguna Tflux-10 3-Phase, 10 HP, Cyclone Industrial Dust Collector, 2022 Becker 10 HP Rotary Vacuum Pump 3-Phase, 220 V 60Hz, w/ Misc. Tooling, S/N: 21050620909 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by appointment only. Please reference RTR# 6073355-01 All offers including offers at the asking price are subject to review and acceptance by our client. Prices are subject to change without notice. There is an eight percent transaction fee on every invoice. For a complete description of our Terms of Sale, please contact an RTR Sales Representative. Stock# RTR# 6073355-01 Contact Info: RTR Services Inc. 1-800-238-3294

LAGUNA - SMARTSHOP LD 4: "Lock Dowel" Boring-Mortising & InsertingSmartShop LD4 Machine: This budget friendly machine was designed specifically for the rapid prototyping of cabinetry. It is a CNC Router that drills & inserts fasteners for: Drawers; closets; desks; cabinets; ...and so much more. It can even handle processing real hardwood.It may look very intimidating, but the "LD4" is actually quite easy to learn. It is constructed out on (1) welded piece of tubular steel, and it weighs approx. 6,000 pounds.It has: Built-in Dust Collector; dual precision Spindles that produce: 2 HP; (8) pneumatic/adjustable clamps; dual vibratory hoppers & inserters.SMARTSHOP LDR is also compatible with: Windows Operating System that allows you to create any kind of design you want.Specifications -- Max. material length: 95". -- (3) Axis positioning. -- Requires no glue or case clamp for assembly. -- (2) Spindles for; Drilling or routing 5 & 8 mm diameter. -- Up to: (4) Working zones. -- (2) Vibrating hopper feed system for: Type "C" & "H" Lock Dowel clips. -- (8) Pneumatic holddowns. -- Laser reading of panel length & thickness. -- Bar code reader.

Laguna Swift CNC Router 5x10 Table Dual vacuum pumps 6-Vacuum zones 3 HP Spindle: 18,000 RPM